Used Wood Chip Blower for sale (10,506)

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower Itsdpfeb Iqf Uox Addsb -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

Condition: good (used), Year of construction: 1988, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h Iedpjwrb Srofx Addotb -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Inlet connection: Ø 600 mm -Outlet connection: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg Iodpsb Ikr Hofx Addstb

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm Itedjb Ilw Topfx Addob -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm Itsdpfx Aob Iqf Nsddeb -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: used, machine/vehicle number: XLER6X2000512xxxx, mileage: 1,405,000 km, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20683 Specifications: Model year: 2006 Mileage: approx. 1,405,000 km Transmission: Opticruise Suspension: Full air Tires: See photos Body: Vang body with hydraulic roof and side Tipping: Rear tipping Length: 870 cm Width: 255 cm Wheelbase: 410 / 136 cm Curb weight: 12,590 kg Engine power: 500 hp Fuel type: Diesel Equipment: Tool compartment Slirej sand spreaders Bull bar Auxiliary driving lights 2x bunk beds Radio/CD Air conditioning / climate control Description:Scania R500 wood chip truck with Vang body, hydraulic roof, and hydraulic side opening.EU-approved until 07.10.2025.A matching chip trailer is available for an additional cost – see photos. Isdswqwlrspfx Addstb The truck is ready for delivery. Km: 1405000 HK: 500 Technical approved: no EU-approved until: 07.10.2025 Own weight: 12590 Total Weight: 27000 Payload: 14335 Width: 255 Length: 870 Euro: 3 Model: R500 Gearbox: Automatic

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower Itedpfx Aob A H Rasddjb -Radial fan in galvanized housing with sound insulation -Engine power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Inlet connection: Ø 800 mm -Outlet connection: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm Ijdpeb Ig Ugjfx Addotb -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 75 kW -Speed: 1480 rpm -Volume flow rate: approx. 40000 m³/h -Total pressure: approx. 1600 Pa Itsdpfx Aob A H E Toddob -Inlet connection: Ø 710 mm -Outlet connection: Ø 710 mm -Dimensions: 2400/1560/H2810 mm -Weight: approx. 1600 kg

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Itodpfx Aoyalbleddjb

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 Isdpfjw Rpdrsx Addjtb without discharge unit (can be provided if needed)

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. Itedjin Ewlspfx Addsb The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Iedpfx Adow Uf S Hodetb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, first registration: 07/1994, next inspection (TÜV): 05/2026, color: white, overall weight: 18,000 kg, front tire size: 255/70/22.5, empty load weight: 6,400 kg, axle configuration: 2 axles, suspension: air, loading space volume: 45 m³, tire size: 255/70/22.5, Equipment: ABS, lighting, Freudenau volume tipping trailer, 2-side tipper, left side with pendulum doors, right side fixed, approx. 45 m³, platform, sliding tarpaulin, SAF axles, 70% tires, German trailer from first owner. Sale only to business customers and with exclusion of any warranty. Loading possible. Ijdpfex Ncrhox Addotb

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Ijdpfjxciidsx Addetb

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Iodpor R Ewljfx Addjtb Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Year of construction: 2003, condition: used, wood chip sieve Ijdpfsx Ta Nfex Addetb

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. Itedpfoxwhw Aex Addjb BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: excellent (used), functionality: fully functional, Wood chip silo with rotary extractor: - Galvanized panels 2.5 mm thick, bolted assembly, Iedpfxowvlx Ds Addjtb - Diameter: 6250 mm, - Height: 12 m, capacity: 350 m³, - Self-supporting roof with railing, - Safety caged ladder with resting platform at 6 m, - 12 ATEX vents, - 1 dry column with fireman connection, - 1 rotary extractor DENIS ECR 240, The entire unit is dismantled and palletized.

Condition: good (used), Year of construction: 2012, functionality: fully functional, total length: 9,000 mm, Overall length: approx. 9000 mm Conveying length: approx. 7000 mm Width: approx. 300 mm Height: approx. 280 mm Itjdpfx Adew Rpygodeb Screw diameter: approx. 180 mm Motor: 1.1 kW

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip system with 50 kW heating capacity already disassembled Itedpsv Ngq Aofx Addjb complete with boiler, stocker unit, and discharge system

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Itedpjd Dy S Rofx Addsb Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Year of construction: 2021, condition: reconditioned (used), Aluminum angled conveyor belt for shredder 2000mm flat + 2000mm incline Dim: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC- conveyor belt Itjdpfx Asff Hgbsddsb conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,55Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded Itjdpfx Adjd Dzahodeb 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Year of construction: 2019, condition: new, Aluminum flat conveyor belt without substructure 3000mm flat Dim: approx. 3000 x 500 x 105mm Aluminum construction: Conveyor belt width incl. corrugated edge 500mm conveyor belt green, 2-ply especially crosswise stable endless welded with step connection Iodpfxeff Hf Do Addjtb * antistatic due to threads in the fabric of the running side drive: motor approx. 0,25Kw, speed 0,3m/sec. * controllable with frequency converter connection 220/400V, 50Hz protection class IP54 drive, motor control optional