Used Chips for sale (4,349)

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm Prjdpoxab R Ujfx Ah Aec - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: good (used), Year of construction: 2018, operating hours: 33,000 h, A Mazak QTC 300 MSL is for sale. The machine has only been used by us from bar stock... We used it to process 90% free-cutting steel... (guides and pistons for hydraulic cylinders) Year of construction 04/2018 (commissioning was August 2018) Mazak Smooth C control system Main spindle/counter spindle/12 tool stations/12 driven stations Loading magazine is from LNS, Quick Load Servo 80 S2 also built in 2018, also came new with the machine Main spindle chuck: Hainbuch Spanntop mini 80 Main spindle bar capacity 80mm Main spindle max 4000 1/min Main spindle spindle nose A2-8 Main spindle Torque 356 Nm Counter spindle chuck: Kitagawa B206 (169mm in diameter 3 jaws) Counter spindle Speed 6000 1/min Counter spindle spindle nose A2-5 Revolver external tools 25 mm square wire shank Turret drill bit 40mm Rapid traverse 30m/min Tooley for tool measuring Machine got a new ball screw drive for the X axis this year (made noises, but dimensions were still top) Bar feeder interface Chip conveyor Coolant high pressure pump 15 bar Parts catcher for main and counter spindle Weight of the machine 4,8t All in all, the machine has always served us well. The machine is still in production, but is available at short notice. The machine can be inspected at any time under power. The standard tool package, which is included with the delivery, is now also included. Predpfx Aorkk Ibsh Aoc Just contact us if you have any questions.

Condition: used, Year of construction: 2008, Table size 1321 x 457 mm X-axis: 1270 mm Y-axis: 508 mm Z-axis: 635 mm Spindle speeds 10.000 rpm Distance between spindle end and table: 102-737 mm Max. work-piece weight: 1588 kg Spindle taper: ISO 40 No. of stations in tool changer 40 pcs. Trunnion rotary table as 4th & 5th axis Equipped with: Automatic work piece measuring High pressure coolant pump 20 bar Chip conveyor Pedpfx Aexpfnvoh Aorc Power on 13.500 hours

Condition: like new (used), Year of construction: 2005, turning length: 6,000 mm, spindle bore: 104 mm, workpiece weight (max.): 10,000 kg, Sauter 4 position revolver Chip conveyor Full C-Axis 360.000 Steady rest fixed up to 1000 mm Pedpfx Aexm Svush Aorc INDAUXMAN 4 chuck 1000 mm SMW Autoblock 3 chuck 630 mm Optional boringbar L = 500 mm Optional boring bar L = 1000 mm Optional Package Sauter holder system (last pictures) Swing over bed Ø: 1300mm Swing over cross slide Ø:940mm DBC Turning Length: 6000mm Spindle bore: 104mm Spindle power: 37kW Bed width: 800mm Tailstock spindle Ø: 180Ø Stroke pinole: 300mm Spindle taper: 6Mk Workpiece weight: 10000 Length: 9500mm Width: 3400mm Height: 2900mm Weight: 24000kg

Year of construction: 2005, condition: used, CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production. Prjdow S I Dgepfx Ah Aoc Accessories: Total enclosure Software path management Software P- System for peeling cutters, Software shaft endmills (207/208) Software discoid tools face (221/222/223/224) Software profiled workpieces (233/234/239/240) Software hoggers, profiled hoggers (255/256/257/258/260/261/262/263) Software discoid tools (264/265) Software shaft and jointing cutters (267/268/277/278) Software step tools (271) Software scoring saws (299) Software saws flat tooth (301) Software saws single sided with chamfer (302/303) Software saws alternate tooth (304) Software saws triple chip (309) Software saws flat top tooth (310) Software saws flat trapezoid tooth (311) Software saws alternate tooth with chamfer (312) Software shaft and jointing cutters (7/8) Software shaft and jointing cutters profiled (33/34) Software hoggers, profiled hoggers (53/54/55/56/57/58) Software discoid tools (64/65) Software shaft and jointing cutters (67/68/77/78) Software compensation (90) Software saws flat tooth (101) Software saws single sided with chamfer (102/103) Software saws alternate tooth (104) Software saws triple chip tooth (109) Software saws flat top tooth (110) Software saws triple chip tooth (111) Software saws alternate tooth with chamfer (112) Software for polishing of profiled hoggers (757/758/760/761) Filter system with chiller for dielectric fluid Automatic fire extinguishing system DIN 14497 Standard programs for measuring, eroding etc. Program for chamfering of workpiece cutting edges, Automatic Diagnosis program for machine operational status with text output on screen Loader for workpieces, with CNC-controlled pivot for loading and unloading to a magazine, 6 sided erosion wheel changer, Workhead SK 50 with adapter to 12 HSK 63 A, Turntable workpiece magazine for 12 workpieces SK 50, Turntable workpiece magazine for 4 workpieces SK 50, 6 flush sets QXD250 CAD/CAM for external PC workstation including ARES drawing program, Industrial PC external PC workstation with desktop PC, monitor, keyboard, and mouse, 1 HSK63 F adapter for measuring the machine. X axis travel: 730 mm B axis travel: +/- 30 ° Y-axis travel: 840 mm Z axis travel: 500 mm E-axis: 330° A-axis: 360° Workpiece carrier: SK50 workpiece length max.: 400 mm Workpiece diameter max.: 400 mm workpiece weight max.: 15 kg Connected load approx.: 6.7 kW (400 V / 50 Hz Dimensions W x D x H approx.: 2160 x 3435 x 2190 mm Weight approx.: 7800 kg colour: RAL 7047 Telegray 4, color RAL 7045 Telegray 1

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand HEIDENHAIN Model iTNC 530 Prsdpfexrhdfex Ah Asc This 5-axis UNITECH HSM-IC was manufactured in 2012. It features a spindle speed of 15,000 rpm, rapid traverse speed up to 30,000 mm/min, and a rotary table diameter of 600 mm. The machine supports a maximum workpiece weight of 500 kg and includes a chip conveyor and internal cooling up to 60 bar. If you are looking to get high-quality milling capabilities consider the UNITECH HSM-IC machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2009, travel distance X-axis: 200 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 280 mm, controller manufacturer: HEIDENHAIN iTNC530, workpiece weight (max.): 15 kg, table width: 200 mm, table length: 200 mm, spindle speed (min.): 42,000 rpm, Control CNC: HEIDENHAIN iTNC530 Axes X-axis travel mm: 200 Y-axis travel mm: 220 Z-axis travel mm: 280 C-axis degrees: 360º A-axis degrees: -15º max.130º Work Table Table dimensions mm: ø200 Maximum workpiece weight kg: 15 Spindle Spindle speed rpm: 42.000 Cooling Cooling through the spindle bar: 40 Tool System Tool holder: HSK-E32 Tool magazine slots: 60 Max. tool diameter mm: ø50 Psdpoxpg H Hsfx Ah Asrc Max. tool length mm: 200 Chip-to-chip time s: 10 Equipment Automation LM100 (EROWA ITS72, 5 levels of 9 positions); 10 kg maximum manipulation Electronic handwheel Chip conveyor Infrared probe High-pressure pump NC rotary tilting table Rated power kVA: 40

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) Pjdpfsw I Eawsx Ah Ajrc - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip extraction with extraction nozzle diameter 140 mm 4...

Condition: used, Year of construction: 2012, turning diameter 300 mm turning length 300 mm control Fanuc Oi-TD greates pass round over bed 550 mm spindle passage 45 mm spindle speed: 6000 U/min spindle motor 11/7,5 kW no. of tools in turret 1 12 rapid traverse 36/36 m/min range L-W-H 3,9 x 1,65 x 2,0 mm chip conveyor ja/yes Number of working hours 3527 h weight of the machine ca. 3300 t CNC lathe Hwacheon CUTEX 160A, built in 2012 12-station tool turret Fanuc 0i TD control Manual Guide user interface Foot switch for clamping devices Fanuc drives Chip conveyor Automatic tailstock Programmable quill Hydraulic unit Electric handwheel Coolant system 6 BAR Central lubrication Standard tool holder Tool measuring arm Tool life monitoring Oil mist extraction system Accessories: 7 boring bar holders, 1 Kitagawa B-206 chuck Chuck Ø 169 mm Technical data: • Swing diameter over bed: 550 mm Psdpfx Ajxrgtrjh Aerc • Max. turning diameter: 300 mm • Standard turning Ø 170 mm • Max. turning length: 300 mm • Chuck size: 6" Spindle • Spindle nose (ASA): A2-5 • Max. spindle speed: 6000 rpm • Spindle bore Ø: 56 mm • Max. bar capacity Ø: 45 mm • Spindle motor: 11/7.5 kW Turret • Number of tool turret stations: 12 positions • Turret change time (s/stations): 0.15 Feed rates • Rapid traverse X-axis: 36 m/min • Rapid traverse Z-axis: 36 m/min • Max. travel X-axis: 170 mm • Max. travel Z-axis: 335 mm • Feed motor X/Z: 3.0/1.8 kW Tailstock • Quill diameter: 60 mm • Quill stroke: 80 mm • Taper bore/tailstock mount: 4 MK Translated with (free version)

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. Pjdpfx Ahoxpxims Aorc - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. Pedpfx Aoxddvnoh Asrc 125 kg auxiliary crane on spindle box.

Condition: used, Year of construction: 2011, x-travel 635 mm y-travel 510 mm z-travel 460 mm Control Heidenhain TNC 620 Pjdpfx Ahoxp R Egj Aerc turning speed range 20 - 8.000 U/min number of tool places 20 Pos. tool taper SK 40 table surface area 790 x 560 mm spindle drive 13 kW Number of working hours ca. 3.870 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2022, Milling machines Travel distance X: 1050 mm Travel distance Y :900 mm Travel distance Z: 600 mm HSC-machines Number of axis: 3 Prsdpfxow D E Hks Ah Aoc milling machine / machining center Control: Heidenhain spindle chuck: HSK63 spindle revolutions: 20000 rpm tool changer: 120 - time spindle cooling chip conveyor control Heidenhain Heidenhain control unit, type iTNC 530 Table load capacity: 3,000 kg Knoll chip conveyor Tool changer for 120 tools

Year of construction: 2014, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19994 Specifications: - 2014 model - 47m3 - Total weight: 20 T - Container weight: 2272 kg - Ready for delivery Description: Pjdsv U Tmnspfx Ah Aorc Everything works as it should according to the owner. The container has been used for chipping Ready for delivery

Condition: used, Used Heat & Control pellet frying and seasoning line made in 1992 with capacity of approximately 450 kg/hour. Used for corn chips, pellets, snacks. Main equipment includes: - Hopper and feed conveyor - Heat and Control fryer with deoiling belt - Flavour drum - Gas powered oil heater and oil pump. Psdsw U A E Ropfx Ah Aorc More information to follow.

Condition: new, AL-KO POWER UNIT 250 P - Exhibition unit - Integrated pre-separator, integrated automatic extinguishing system ----- Technical Data ----- Extraction nozzle Ø: 250 mm, nominal airflow: 3,534 m³/h, max. airflow: 4,900 m³/h, max. negative pressure: 3,184 Pa, filter area: 22.4 m², chip collection volume: 2 x 250 liters, number of bags: 2 pieces, motor 400 V: 7.5 kW, dimensions (LxWxH): 2,351 x 1,058 x 2,361 mm, sound pressure level: 71 dB(A), weight: 758 kg, according to: GS - HO - new exhibition machine - Prjdpowu Hatsfx Ah Aec

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm Predpfoxndbfjx Ah Aoc turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Podpfx Ahewztq Ee Asrc Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Year of construction: 1994, condition: good (used), Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of construction: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm clamping surface table: 800x500 mm spindle revolutions: 20-2780 rpm Steps: 2x continuous Spindle power: 5,5 kW tool holder: SK40/ISO40 Axle drive: 0-2000 mm/min Axis drive rapid traverse: 5000 mm/min quill stroke W: 100 mm Swivelling of the head: 2x90 Resolution measuring system: 0.001 mm positioning: +/- 0,02 mm Special features: protective housing to open, chip tray, quill stroke Predpfxefmu E As Ah Aec

Year of construction: 2015, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19995 Specifications: - 2015 model - 47m3 - Total weight: 20 T - Container weight: 2260 kg - Ready for delivery   Description: Everything works as it should according to the owner. The container has been used for chipping Ready for delivery Pjdpfov U Syaox Ah Aerc

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, Psdpfx Ahju R S A Rs Ajrc max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: ready for operation (used), turning length 500 mm Prodjxnda Uepfx Ah Ajc turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Year of construction: 1999, condition: excellent (used), DMU80E with hard disk storage Control Heidenhain 426M Year 1999 2014 axes and spindle revised Speed 18000 Since the revision approx. 1200 hours run Accuracy according to a new machine Chip conveyor available Predpfx Ahjgwt U Do Ajc Accessories would be available at extra cost.

Condition: good (used), Year of construction: 2010, Technical data: Maximum diameter: 280 mm Maximum rectangular dimensions: 300×280 mm Maximum bundle dimensions: 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of operation, these machines are standard-equipped with a 2-meter roller table, a chip conveyor, variable clamping force adjustment, a double retractable index vise, a work light, and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm notifications Infinitely variable blade speed, controlled by an inverter Prsdpfswvu U Usx Ah Ajc Flywheel motion detector with blade jam and band breakage switch Automatic shuttle-type feed and movable roller table Hydraulic blade tensioning Two-stage rapid lift clamping devices Split front vise Double retractable index vise Work height sensor and quick-approach function Carbide guides with roller bearings Nesting device and vertical rollers for bundle cutting Length adjustment: magnetic scale 20 preset work programs Automatic chip conveyor Motorized band brush (Roller conveyor available as an option upon request)

Condition: excellent (used), Mechanical/mechanical clamping system with force transmission, manually operated: Clamping system mechanical/hydraulic - Deformation-resistant design for very high clamping accuracy - For use on machining centers with high quality and production output - Drive spindle with clamping force presetting - Lubrication nipples on both sides for lubricating all guides and the spindle thread subject to wear - M12 fastening thread for workpiece stop guides subject to wear and the spindle thread - M12 mounting thread for workpiece stop - sturdy chip guard prevents chips from entering the interior of the body - all guides hardened and ground - height dimension base body/workpiece support -0.02 - important for paired use - supplied with reversible stepped jaws, hardened and ground. Further technical features: - Design: Model RKE - 3-sided clamping option - can be clamped horizontally, vertically or laterally - base body made of steel - hardened and ground - with power transmission Prodpfx Ahoqff Syj Aec RÖHM brand Jaw width 125 mm Material steel Jaw height 40 mm Model RKE Clamping force approx. 40 kN Clamping width 0 - 216 mm / 97 - 312 mm Total length 463 mm