Sorting screen for chips and bark

Tähkä OY, Finland 230x300

Year of construction: 1997, condition: good (used), Type: DDA:VP-370:A27097 Trough: approx. 3,000 x 660 mm Screw diameter approx. 370 mm Drive via geared motor Hodpst S Sxgefx Af Hsfi

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price Hfsdpfx Asv Si Szef Hoi To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. Hfsdpfx Aey Hb Upjf Hji 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: good (used), Year of construction: 2009, Machine will come with robot . Hfodpfx Afoxfu S No Hji 42.000 rpm

Condition: like new (used), Manufacturer: V. Randwijks Rotor Dia.: 500mm Hodpeg Snt Sofx Af Hsfi Rotor Width: 700mm Electrical Motor: 22kW / 1.470 RPM

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. It is still in place and runnning. Buyer to decommision and collect. This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine Hfedpfxsxftito Af Hoi

Condition: like new (used), Year of construction: 2024, Permanent overbelt magnet separator TYPE DMPM800 1,400 x 900 x 220mm ===== Solid steel construction, welded Construction welded & painted RAL 7016 (anthracite gray) Magnet dimensions: 800x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm crowned, shaft fixed with clamping bearings. Drive: GEMOTEG 1.1KW slip-on gear motor, speed 0.4-0.6m/sec Connection 400V, 50Hz, protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5.4mm thick Conveyor belt width: 650mm 7 TG-40 studs high frequency welded Belt material: 3-layer, particularly transversely stable * equipped with rust-proof alligator connectors RS125 Magnet properties: Built-in magnetic core: Strontium Ferrite Y30 Bound SfRe strontium hard ferrite magnetic core encased in soft iron so that very high permeability can be guaranteed. Housing with 1.4301 stainless steel plate and pole shoes tightly closed and sealed. Hfsdshun Uiepfx Af Hei Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection Hsdpfx Asw Av Ivef Hofi The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp Hsdpfeyhc T Iox Af Hofi (14) units available.

Condition: good (used), the machine is in good condition, includes electrical cabinets, sharpening machine Hedjvdyr Nopfx Af Hsfi