Used Clamping Rails For Elektromotor for sale (12,538)

Condition: good (used), Approximately 96m twin track rail system available from closed meat factory. Caodpeq Ii S Ejfx Afloa

Condition: used, mileage: 500 km, power: 250 kW (339.91 HP), first registration: 05/2024, overall weight: 18,000 kg, fuel type: electric, color: white, axle configuration: 2 axles, gearing type: automatic, loading space volume: 36 m³, loading space width: 2,480 mm, loading space length: 6,800 mm, loading space height: 2,200 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * Location SafeServer structure * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Waste paper certificate * Chemical certificate (IBC) * 4 rows of load securing * Lashing rings * 2,500 kg Bär tail lift * Rear view camera * Short driver's cab * Leaf/air suspension * ABS * Spoiler * Sun visor * Air conditioning * Seat heating Codpjulb Hmefx Afleaa * Cruise control * 100% electric drive * 250 kW electric motor * Battery capacity 200 kWh * Charger DC/DC 15 Ah, AC/DC 22 kW * Luxury Air driver's seat * Driver Performance Assist * Adaptive Cruise Control with FCW and AEBS-3 * Lane keeping assistant * Glass roof hatch Monthly rent 3,900 ¤ + VAT Minimum rental period 6 months incl. registration, tire wear, Inspection, TÜV, service, wear and tear Insurance is provided to the renter

Condition: used, mileage: 500 km, power: 250 kW (339.91 HP), first registration: 05/2024, overall weight: 18,000 kg, fuel type: electric, color: white, axle configuration: 2 axles, gearing type: automatic, loading space volume: 36 m³, loading space width: 2,480 mm, loading space length: 6,800 mm, loading space height: 2,200 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, * Location SafeServer structure * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Draft beer certificate * Waste paper certificate * Chemical certificate (IBC) * 4 rows of load securing * Lashing rings * 2,500 kg Bär tail lift * Rear view camera * Short driver's cab * Leaf/air suspension * ABS * Spoiler * Sun visor Casdpfsulb Hysx Afloa * Air conditioning * Seat heating * Cruise control * 100% electric drive * 250 kW electric motor * Battery capacity 200 kWh * Charger DC/DC 15 Ah, AC/DC 22 kW * Luxury Air driver's seat * Driver Performance Assist * Adaptive Cruise Control with FCW and AEBS-3 * Lane keeping assistant * Glass roof hatch Monthly rent 3,900 ¤ + VAT Minimum rental period 6 months incl. registration, tire wear, Inspection, TÜV, service, wear and tear Insurance is provided to the renter

Condition: good (used), Clamping plate with grooves, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping surface: 2995 x 2500 mm -Clamping plate: with grooves, no T-slots -Height: 300 mm -Groove width: 10 mm -Groove spacing: 200 mm -Transport dimensions: 3100/2500/H300 mm Casdendzycjpfx Afloa -Weight: 5000 kg

Condition: used, Year of construction: 1990, total width: 1,100 mm, total length: 3,400 mm, total height: 2,450 mm, - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 90002 - Main motor power [kW]: 0.7 - Press drive: Hydraulic - Max. clamping width [mm]: 2900 - Max. clamping height [mm]: 2000 - Number of cylinders [pcs]: 5 - Options: Horizontal/vertical cylinders separately controlled - Transport dimensions: 3400mm x 1100mm x 2450mm (l x w x h) - Transport packages [pcs.]: 1 Csdpowxr Nuefx Aflsaa Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2004, Clamping Plate TECNOMAGNETE - SQ410HD75 MACH-ID 9293 Brand: TECNOMAGNETE Model: SQ410HD75 Year of manufacture: 2004 Permanent-electro magnetic plates 4 matching plates Total of 12 units available Mono-block pole plate and FEME 4 Pin connector CE Declaration of Conformity Table length: 1020 mm Table width: 410 mm Table height: 68 mm Number of poles: 40 Pole size: 75 x 75 mm Clamping force: 306 kN Length: 1020 mm Codpfxjxxkhyj Afleaa Width: 410 mm Height: 68 mm Weight: 210 kg

Condition: used, Your contact person in our home: Men: Andre Evering Mr: Marcel Brahms Mr: Simon blank specifications to the wide clamping shelf traverse: Manufacturer: Nimar Type: MI 50 Included in the scope of delivery: 01 x wide clamping rack crossbar, used Material color: grey Traverse type: MI 50 Box profile: 80 x 40 mm inside width: 2.600 mm 02 x locking pins, used Construction: fully galvanized Cajdpjdh Ub Asfx Aflja To secure the beam against unintentional lifting Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles (without discharge)

Condition: used, Technical details: Caedpfx Asu S H Unjflja width: 1000 mm depth: 800 mm height: 1250 mm weight of the machine ca.: 1100 pro Stück kg 2 pieces available (price per piece) to DIN 650: T-slot width a= 36; h= 60; b= 61; c= 25 mm, T-slot spacing 200 mm *

Condition: good (used), Year of construction: 2009, Manufacturer BIESSE Model UNICLAMP Machine type: Mechanical clamping system Year of manufacture: 2009 Item number: 7350171 Technical specifications Quantity: 5 Clamping height: 15 - 55 Casdpfx Afewmr Tvjlsa Height: 48 mm, with quick-release coupling Suitable for Biesse Additional information * Sales unit includes 5 used Uniclamp clamping elements * Clamping elements for clamping strips, suitable for Biesse console tables with ATS Location: From stock, 54634 Bitburg - Available immediately -

Condition: good (used), clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm Cajdpfx Afekm Rn Dslja -Weight: 5220 kg

Condition: used, Year of construction: 2001, total width: 800 mm, total length: 3,300 mm, total height: 3,200 mm, Empty weight: 1.000 kg Trabo WSB33 Net locking dimensions: 2700*2700mm 6 hydraulic supports in two groups Mobile ladder with guide rail mounted on the bench Cjdswnhldjpfx Aflsaa Dimensions module 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Pitch of the holes 122.5 mm Height stop strip 130 mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 33009012 - Main motor power [kW]: 1.1 - Max. clamping width [mm]: 2700 - Max. clamping depth [mm]: 2690 - Options: Remote control - Transport dimensions: 3300mm x 800mm x 3200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Cedpfx Afexy Styslsaa Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Your contact person in our home: Men: Andre Evering Mr: Marcel Brahms Mr: Simon blank specifications to the wide clamping shelf traverse: Manufacturer: Nimar Type: MI 50 Included in the scope of delivery: 01 x wide clamping rack crossbar, used Material color: grey Traverse type: MI 50 Box profile: 60 x 40 mm inside width: 2,000 mm 02 x locking pins, used Construction: fully galvanized To secure the beam against unintentional lifting Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems Casdpfx Asdh Ubleflja -Delivery with our own fleet of vehicles (without discharge)

Condition: used, length 800 mm width 500 mm height 1000 mm weight of the machine ca. 1,1 t 2 units - Weight approx. 550 kg/each Caedpfjtv Icusx Afloa

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, Caedsh It Tyjpfx Aflja -T-slot plate: clamping plate on a solid base frame with inlet/outlet device -Clamping plate: Ø 600 mm -Groove width: 20 mm -Accessories: incl. 4 holders -Total dimensions: Ø 685 x 825 mm -Weight: 200 kg

Condition: used, Trabo WSB33 Net locking dimensions: 3680*2700mm. 6 hydraulic jacks in two groups Electric operation Module dimensions 980x980 mm Installation angle 70-81° or horizontal Diameter holes 25 mm Pitch of the holes 122.5 mm Height of the stop strip 130 mm - Documentation available: No - CE certificate present: No - Serial number: 104790/0007 - Press drive: Hydraulic - Max. clamping width [mm]: 140 - Max. clamping height [mm]: 2500 - Max. clamping depth [mm]: 3400 - Number of cylinders [pcs]: 3 - Options: Remote control, Horizontal/vertical cylinders separately controlled Csdewnh D Hjpfx Afloaa Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, 4 clamping elements, down-hold clamps, heavy-duty clamping jaws, clamping plate LENZKES type 170796 Plate clamps, flat clamps, deep-jaw clamps, deep clamping jaws, low-profile clamps, clamping jaws Length: 280 mm Width: 200 mm Height: 113 mm Clamping plate width: 89 mm Mounting slot distance: 62.5 / 125 mm Mounting slot width: 27 mm Mounting slot length: 145 / 185 mm Construction height of mounting slot clamping surface: 58.5 mm - Down-hold action via hex socket screw SW17 - Clamping movement via trapezoidal thread spindle - Reversible jaws for use on either side along the trapezoidal spindle - Reversible clamping jaws with dovetail guide for changing sides Codpfjxy Stgjx Afloaa - 3 elongated mounting holes for fastening to the machine table Weight per clamp: 15.5 kg Total weight: 62 kg Very robust design Very good condition

Condition: good (used), Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps Cajdpfx Asxy H E Djflsa -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Condition: used, Price: On request Hydraulic Pegboard press Cajdpfx Aswnhd Teflja Van Duin. Confinement size 4500 * 3000mm 7 cylinders. Transport dimensions: 4500x1300x3510mm (LxBxH), 2000kg. - Documentation available: No - CE certificate present: No - Serial number: 1272595 - Max. clamping width [mm]: 4500 - Max. clamping depth [mm]: 3000 - Number of cylinders [pcs]: 7 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine Csdpsb S Taqjfx Aflsaa -Width: 945 mm -Length: 2990 mm -Height: 58 mm -Working height: 870 mm -Plate: with support ribs -Groove width: 24 mm -Center distance between the T-slots: 180 mm -Dimensions: 3605/950/H870 mm -Weight: 2290 kg

Condition: used, Hydraulic Pegboard press Van Duin. Confinement size 4000 * 2500mm Csdswng Htepfx Afleaa 5 cylinders Transport dimensions: 4550x1300x3030mmm (LxBxH), 2000kg. - Documentation available: No - CE certificate present: No - Max. clamping width [mm]: 4000 - Max. clamping height [mm]: 2500 - Number of cylinders [pcs]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm Caodpfx Asw Dzk Eeflsa -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Condition: used, total width: 2,220 mm, total length: 4,750 mm, total height: 1,000 mm, - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 45870403 - Number of cylinders [pcs]: 7 - Number of counter-pressure cylinders [pcs]: 2 - Transport dimensions: 4750mm x 2220mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Cedpfxoxzbtrj Afljaa

Condition: good (used), Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler -Tensioning pliers: sealing device for strapping -for staples: approx. 16 mm width Codpfsi E Af Rox Afloaa -Dimensions: 450/100/H110 -Total weight: 2.9 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table -Clamping plate: with support ribs -Clamping surface: 2010 x 4010 mm -Plate thickness: 55 mm -Plate: with support ribs -Number: 1 piece clamping plates available Caedpow Hz Rkjfx Afloa -Price: per piece -Dimensions each: 2010/4010/H350 mm -Weight: 6100 kg/pc.