Used Cnc Boring Machine for sale (65,104)

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Guedpfx Afsyy I Snj Toa

Condition: used, Year of construction: 2017, operating hours: 4,898 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, CNC machining center, used Manufacturer: AWEA Model: BM-1600 Year of manufacture: 2017 Control system: Heidenhain iTNC 530 HSCI Guodpfeyy R Hzsx Af Toa Operating hours Spindle hours: 4,898 h Total power-on hours: 18,739 h Working area: X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 800 mm Spindle: Speed: 10,000 rpm Power: 22/35 kW Taper: BT 50 Table: 1,700 x 800 mm Max. load: 2,000 kg Equipment: - 40-position tool changer - Through-spindle coolant 20 bar - Electronic handwheel - Left-side chip conveyor - Direct linear measurement The machine was used in-house for manufacturing products by an automation technology company. A significant amount of aluminum processing was done on this machine.

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm Godpfx Aeu Idp Def Tsua tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Guedsyudtpspfx Af Toa Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Condition: used, CNC surface grinding machine Gujdsy Apq Djpfx Af Tja

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg Gsdsu Agzxepfx Af Tsua immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: ready for operation (used), Year of construction: 1997, Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible. Guedpfjyzhazox Af Tsa

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic Gusdsyymz Uopfx Af Tea INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: excellent (used), Year of construction: 2018, Technical specifications: Manufacturer: RAMBAUDI/JOBS Model: SARA Year of manufacture: 2018 Control: HEIDENHAIN itnc640 Dimensions: 12,600 x 6,830 x 5,045 mm Table: 5,000 x 2,500 mm Maximum load capacity: 15 tons The machine is equipped with a universal milling head with two tilting planes (C and A). The rotation of the tool in the universal milling head as well as the swivel movements of the C and A planes are controlled by a drive spindle: - Speed: 5,000 rpm - Power: 25 kW (S1) / 33 kW (S6 60%) - Torque: 482 Nm (S1) / 637 Nm (S6 60%) - Tool holder: ISO50 DIN69871 collet Main axes: - X-axis: Longitudinal movement of the work table - Y-axis: Transverse movement of the RAM slide - Z-axis: Vertical movement of the RAM - Swivel axis 1 (C plane): Rotation of the milling unit around the vertical axis of the RAM. - Swivel axis 2 (A plane): Rotation of the milling unit around a plane offset by 45° from the C plane. Automatic Tool Changer (ATC): Gsdpsv Rfwkjfx Af Tsua - 24-position chain magazine (ISO 50) - Tool change arm between spindle housing and magazine Additional Equipment: - RENISHAW NC4 laser AXIS SPEEDS | Axis | Travel | Speed | |-----|-----|----- | | X-axis (optical measuring system) | 5,200 mm | 12 m/min | | Y-axis (optical measuring system) | 3,000 mm | 12 m/min | | Z-axis (optical measuring system) | 900 mm | 12 m/min | *(Note: Optical measuring systems ensure precise position detection for the X, Y, and Z axes.)*

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Gusdsxy Tmnopfx Af Tea

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Gjdjxy Tlwspfx Af Teua

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Guodpfxsqa Txqo Af Tja Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: repair required (used), Year of construction: 1990, functionality: not functional, machine/vehicle number: 418.364.077, drilling depth: 800 mm, feed length Z-axis: 1,000 mm, total length: 4,200 mm, total width: 2,100 mm, total height: 2,800 mm, workpiece weight (max.): 500 kg, overall weight: 7,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 7,000 rpm, drill diameter: 25 mm, type of input current: three-phase, number of spindles: 1, feed length W-axis: 120 mm, TBT - Deep hole drilling machine, single spindle, with CNC cross table, "x/y" axes and "W" positioning slide! Control: EST - Error in CPU rack. Machine is not operational. All actuators/hardware were functional until decommissioning. The rack error occurred during the downtime after decommissioning. Gusdpfoyz Rd Nex Af Tsa Power electronics/inverter: Bosch Clamping table and various accessories Dismantling preferably by the buyer; machine components (control cabinet, body, oil tank) can be placed onto machinery skates using the existing hall crane, but loading inside the hall is not possible! Dismantling and loading upon agreement. Transport exclusively by the buyer.

Condition: excellent (used), Year of construction: 2014, SPECIFICATION Table size 1372 x 356mm Longitudinal traverse 762mm Cross traverse 508mm Head vertical traverse 500mm Spindle taper 40INT Spindle speeds (inf. Variable) 40-5000rpm Spindle power 3.75Kw Quill power feed 0.038mm, 0.076mm, 0.15mm/rev Quill travel 127mm Quill diameter 105mm Throat depth 520mm Max table load 600Kg Head tilt left to right +/- 45 degrees Approx. nett weight 2350Kg   MACHINE EQUIPPED WITH Prototrak SMX 3-axis CNC Control Traking Advanced features Networking memory DXF convertor Godpsyrqbnjfx Af Toua Power drawbar Table guards Base splash tray Automatic lubrication Lighting Coolant system

Condition: new, Year of construction: 2023, New machine Gsdpfx Aslk R Epjf Tjua Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Maximum panel thickness: 60 mm Maximum panel size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1997, Used machine Guedpfsxwz Ihjx Af Toa Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and end-face - Swivel: 0–90 degrees via handwheel - Pneumatic material clamps: 3 pcs - Passage: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction connection diameter: 120 mm - Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Storage location: Hesse

Condition: used, Year of construction: 2014, travel distance X-axis: 1,500 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Fagor 8055 M, table height: 610 mm, table length: 1,600 mm, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, CNC machining center Brand: Travis Model: M-1500 SL Year: 2014 CNC control: Fagor 8055 M Travel (X, Y, Z): 1500x610x610 mm Worktable: 1600x610 mm Spindle speed: 8,000 rpm Taper: ISO 40 Guideways: Linear roller guides Tool changer: 24 positions Gedpfoy Aww Sjx Af Tsua Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Schedule a visit to view the machine on site.

Condition: used, Year of construction: 2017, feed length X-axis: 390 mm, feed length Y-axis: 240 mm, feed length Z-axis: 400 mm, spindle speed (max.): 10,000 rpm, table length: 810 mm, table width: 250 mm, overall weight: 1,320 kg, table load: 80 kg, workpiece weight (max.): 7 kg, Bed type CNC milling machine Brand: Travis Model: MM-4 Year: 2017 Control: Fagor 8055i Table: 810x250 mm Maximum table load: 80 kg Travel (X, Y, Z): 390, 240, 400 mm Taper: BT40 Clamping: Pneumatic Spindle speed: 10,000 rpm Tool changer: 8 positions Gujdpfx Asy Awgyjf Tja Tool diameter: 80 mm Tool height: 260 mm Tool weight: 7 kg Machine weight: 1,320 kg Machine from IAIN Mecanizados workshop in Hospitalet de Llobregat. Arrange a visit to inspect the machine on site.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, travel distance X-axis: 660 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item promptly between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 660 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Spindle taper: ISO 40 Spindle speed range: 100 – 6,000 rpm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table Table dimensions: 700 x 360 mm Max. table load: 300 kg Distance table to floor: 840 mm Distance table center to column min.: 190 mm Distance table center to column max.: 570 mm Tools Max. diameter with adjacent tools: 85 mm Max. diameter with empty adjacent stations: 135 mm Max. tool length: 250 mm Max. tool weight: 6 kg Max. total tool weight: 60 kg Gujdpfx Aeyr I D Tof Tea Ball screw Pitch: 32 mm Diameter: 10 mm T-slots Number: 3 Width: 18 mm Spacing: 110 mm MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Machine weight: 4,000 kg EQUIPMENT 16-position tool changer Tool holders Measuring probe 4th axis Note: The vise shown in the images is not included in the sale. External reference: Lot 20

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) Gusdpfx Afjym Nf Is Tja ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers)

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 5098, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submission of a bid constitutes an obligation to collect the item within the specified period from 04/05/26 to 07/05/26. Godpfx Aoyr Hlpof Teua TECHNICAL DETAILS Travel X-axis: 960 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Table dimensions: 700 x 360 mm Number x width x spacing of T-slots: 3 x 18 x 110 mm Distance from table to floor: 840 mm Maximum table load: 300 kg Distance from table center to column: min. 190 mm, max. 570 mm Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Rapid traverse: 15 m/min Spindle speed: 100 to 6,000 rpm Spindle taper: ISO 40 Ball screw X and Y axis: 32 x 10 mm lead diameter Maximum tool diameter (adjacent tool stations occupied): 85 mm Maximum tool diameter (adjacent tool stations free): 135 mm Maximum tool length: 250 mm Permissible tool weight per station: 6 kg Maximum total tool weight: 60 kg MACHINE DETAILS Control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg EQUIPMENT 16-position tool changer 3D probe Note: The machine vice shown in the photos is not included in the scope of delivery. External reference: 25

Condition: not inspected (used), Year of construction: 1992, functionality: unexamined, machine/vehicle number: B5133, travel distance X-axis: 960 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 04/05/26 and 07/05/26. TECHNICAL DETAILS Travel X-axis: 960 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Table dimensions: 700 x 360 mm T-slot number x width x distance: 3 x 18 x 110 mm Gusdjyr Hinopfx Af Tsa Distance table to floor: 840 mm Max. table load: 300 kg Distance from table center to column min.: 190 mm Distance from table center to column max.: 570 mm Ball screw, X and Y axes: 32 x 10 mm Spindle taper: ISO 40 Spindle speed: 100 to 6,000 rpm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Max. tool diameter with adjacent tools: 85 mm Max. tool diameter with free adjacent slots: 135 mm Max. tool length: 250 mm Permissible weight per tool: 6 kg Max. total tool weight: 60 kg MACHINE DETAILS Control: HEIDENHAIN TNC 425 Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Weight: 3,500 kg Connection: 13 kW EQUIPMENT 16-position automatic tool changer 3D touch probe Note: The machine vice shown in the photos is not included in the scope of delivery. External Reference: 23

Condition: used, Year of construction: 2005, Working area: X=2970 mm / Y=1725 mm Axis travel speeds: X=60 Y=45 Z=25 m/min Weight: 3200 kg Storage location: Nattheim Guedpfx Ajw Dcccjf Tea

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Gedpfjw Dcb Ssx Af Toua

Condition: used, Year of construction: 2004, HURCO VMX 64 X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 Gusdpfx Afjwyna So Tea rapid traverse x/y/z: 18 / 18 / 13 m/min drive capacity – spindle motor: 15 kW tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational