Used Cnc Control Panel for sale (53,772)

Condition: used, Fill Type: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Fill 3D ULTRASONIC CUTTER 3D ULTRASONIC CUTTER The 3D ultrasonic cutter from Fill enables three-dimensional contour trimming of fiber-reinforced plastics using ultrasound-activated cutting systems. Your advantages: Ergonomic loading and unloading Easy creation of trimming programs (NC control) Space-saving system concept (alternative to a robot) High repeatability High process stability Simple and fast tool changes Possible integration into an overall process chain The principle: The linear axis portal enables precise guidance of the ultrasonic knife with low space requirements and simple kinematics. The Siemens CNC 840 D control allows the trimming device to be programmed like a machine tool. Tool corrections or path changes can be easily performed directly on the machine. The machine is equipped with a 20 kHz ultrasonic cutting unit as standard. However, it can also be equipped with alternative systems. The knife is equipped with a separate rotary axis to cut tight radii and save other axis movements (5 + 1 axes). Technical data: Machine data Component length max. 1,000 mm Component width max. 900 mm Component height max. 400 mm Path repeatability +- 0.1 mm Positioning accuracy +- 0.2 mm Load capacity approx. 30 kg Electrical control: Siemens Sinumerik 840D sl Technical data, complete system: Fill 5-axis guided CFRP trimming system, Type: SM - 03 Electricity: Mains voltage: 3 x 400 V AC Mains frequency: 50 Hz Rated current: 30 A Fuse: min. 50 A / max. 63 A Redozdy Iaopfx Abuoch Control voltage: 24 V DC Pneumatics: Quality class compressed air: according to ISO 8573-1:2010 Inlet air: 5/6/4 System pressure: min. 6 bar Supply connections Illustrations in "Connection diagram" on page 3/7. Noise: Continuous sound pressure level: 80 dB(A) Dimensions: Length: approx. 3920 mm, Width: approx. 3400 mm, Height: approx. 3500 mm Weight: Total weight: approx. 1500 kg Painting: Base frame pebble gray: RAL 7032 Cross-members pebble gray: RAL 7032 Moving parts pebble gray: RAL 7032 Control cabinets light gray: RAL 7035 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), CNC control, control panel, control panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, power board -Manufacturer: Heidenhain, power board CNC control -Type: PL 405 B -ID No.: 263 371 22 Redepz Sflspfx Abuech -Voltage: 24V -Quantity: 2x circuit board available -Price per piece -Dimensions: 280/230/H50 mm -Weight: 1.2 kg/pc.

Condition: used, Adept Control Unit Model 310 with Operating Panel Here we offer an Adept control unit, Model 310, with an operating panel. Adept control unit, Model 310, with operating panel. Control unit, touch panel, cables, and software package. Type: Model 310 Rsdpfjzdimajx Abuech Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, Used CNC plate drilling machine Control system: Heidenhain TNC 426 X 2500 mm Rodpsz H N Npsfx Abuech Y 1700 mm Z 800 mm Table load capacity: 18,000 kg

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. Rcodpfx Aou Dw I Eebush The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 2020, machine/vehicle number: 233949-1, Offer 26328 Measuring and inspection plate made of natural hard stone with cabinet base Rjdpfj Ad Hh Dox Abusch Technical data: - Measuring and inspection plate according to DIN 876 / 00 - Length approx. 1200 mm - Width approx. 800 mm - Plate thickness approx. 160 mm - Table height, height-adjustable, with cabinet base approx. 910 mm - Cabinet base with 1 door + 4 drawers - Drawer width 550 mm - Weight approx. 500 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and Rsdpjwfdm Eofx Abuech variable machine table.

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Rcsdpfx Aez Duqajbush

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, keyboard, control panel teach pendant Rcedji Huvlopfx Abuoh -Manufacturer: KUKA, control panel control panel -Type: VKCP2-SP -AN: 00-136-938 -SN: 0000036 24V/0.5A/DC -Quantity: 1x panel available -Dimension: 330/320/H120 mm -Weight: 3.2kg

Condition: used, Year of construction: 2009, CNC control, control panel, computer monitor, screen, TFT industrial monitor -Control panel: Operating terminal control panel including PC Command Panel -Monitor: FlatmanType FK170SBRGD001 -Control cabinet cooling unit: Rittal type SK 3302100 Rcodpfxstp Rf Ee Abujh -Individual components: see photos -Total dimensions: 550/600/H870 mm -Weight: 52 kg

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC-controlled flank grinding machine for band saws • Grinding mist extraction fully integrated into the base machine • Equipped with a 4-axis CNC control system • Each movement can be controlled individually via stepper motors, resulting in minimal idle times • The clearly arranged display also serves as an operating element via a touchscreen • The advanced saw tooth can be finished-ground multiple times in one position • Pneumatic additional clamping device for stabilizing thin saw teeth, thereby increasing dimensional accuracy • Powerful coolant system with full enclosure • With a special program (option), variable tooth widths, tooth pitches, and tooth heights can be ground * Feed from the left Technical data: • Tooth pitch: 15 - 100 mm • Flank clearance angle: 0° - 7° • Blade width: 75 - 360 mm • Blade length: from 5.3 m • Cup grinding wheel diameter: 75 or 100 mm • Bore diameter: 20 mm Blade height measuring device for band saws and ripsaws Safety package for cleaning system with flow monitor and pneumatic valve Machine-side connection to cleaning system for ISELI machines bc130, bc240, bc325, em300 Yellow signal lamp Grinding programs / software licenses Program for variable tooth pitches. The tooth pitch is entered on the machine's touchscreen Redpjz Hdpwefx Abuech Setup of band saws 1 set of lateral and rear blade supports, setup for narrow band saws with eccentric clamping from 25mm, vernier adjustment for the flank angle adjustments on the tooth back and tooth face, pneumatic additional clamping device for cup grinding wheels with diameters of 75 mm + 100 mm Flank grinding with radius, flank measuring device for protrusion and cutting gap.

Condition: excellent (used), I offer a Siemens SIMATIC Mobile Panel 177 PN, a mobile operator panel designed for professional applications in industrial automation. The device provides convenient operation and control of machines and production lines from a portable operator panel. Technical specifications: • Manufacturer: Siemens • Model: SIMATIC Mobile Panel 177 PN • Catalog number: 6AV6645-0BB01-0AX0 Rcedpjz Sm I Aofx Abujh • Communication interface: PROFINET (PN) • Color TFT touchscreen • Programmable function keys F1–F14 • Built-in manipulator / control knob • Long connection cable with a multi-pin industrial connector • Made in Austria Condition: • Used item • Screen without cracks or mechanical damage • Normal signs of use and storage are visible • Housing in good technical condition • Sold as is, according to the condition shown in the pictures • Full testing is not possible – sold as untested Application: • CNC machining centers • Production lines • Industrial robots • Siemens SIMATIC automation systems • Assembly and production workstations Included: • Siemens SIMATIC Mobile Panel 177 PN • Original connection cable with an industrial connector

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. Rodpfsynwxxjx Abujch A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: good (used), CNC control, operator panel, LCD SIEMENS SINUMERIK 810 Rodpfedpg T Rex Abuech -Manufacturer: Siemens -Type: Sinumerik 810 M -Dimensions: 420/280/H350 mm -Weight: 9.7 kg

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Rcjdozv Sdkepfx Abush Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Year of construction: 2024, condition: used, Year of manufacture: 2024 New: Yes Empty weight: 35 kg Dimensions of cargo space: 51 x 20 x 85 cm Serial number: 9305082 Rcedpfoyaf Sqsx Abush Please contact Team DPX for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand-held terminal -Manufacturer: Andras, control panel hand terminal -Type: T-H3LVGA-M7 #0603LV322-U Rjdpfx Aomt Ratobuech -Total dimensions: 500/460/H110 mm -Weight: 4.8 kg

Condition: used, CNC turning machine MONFORTS Type RNC 300 MultiTurn with driven tools and Y-axis Year of manufacture 2005 CNC control FANUC Series 18i-TB Swinging diameter over bed 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Rsdpfx Aezfau Ajbusch Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 Volt, 50 Hz, 63 Amp. - hydrostatic guideways for the X, Y and Z axes - with tailstock, chuck and collet chuck - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 driven tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Footprint of the machine with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: good (used), Year of construction: 2017, functionality: fully functional, Lovati BEM 31 numerical control CNC machine for processing flat glass Year of production 2017 Power 40 KW max. size of glass 3200 x 1650 Rcsdpfxetz T Sae Abush equiped with tilting loading table Machine is in a good condition working in the factory. Possibility to see it at work.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code Rcedpfx Aeynwx Sjbujh

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,800 h, functionality: fully functional, machine/vehicle number: 03161769, saw blade diameter: 700 mm, total length: 14,500 mm, total width: 1,600 mm, type of input current: AC, total height: 1,300 mm, input voltage: 400 V, spindle speed (min.): 2,765 rpm, spindle speed (max.): 2,765 rpm, input current: 23 A, spindle motor power: 7,500 W, Equipment: motor brake, saw blade guard, CNC sliding miter saw with infeed sliding table and outfeed table with lateral ejector. The saw head weighs approximately 600 kg, plus the infeed and outfeed tables, each estimated at 500 kg. Cross-sections: 330x200 mm - 440x100 mm Maximum wood input length: 6,300 mm Maximum wood output length: 6,000 mm Rcodpfxez D Ewwj Abueh 1 carbide-tipped saw blade installed, plus 3 spare saw blades. Complete machine documentation available, including CE certificate.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Rjdpfexpqy Dsx Abujch Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, LVD 3m x 135Ton, 4 Axis CNC controlled, with LVD Cadman CNC Control, Type PBEB 135/30, S/N 31078, Year 2007, - No Tooling LVD PBEB 135/30 CNC Press Brake with 135 Ton capacity and 3050mm bending length. Hydraulic CNC press brake ideal for fabrication and sheet metal applications. Available from stock The LVD PBEB 135/30 CNC Press Brake is a robust and reliable hydraulic bending machine designed for precision sheet metal fabrication. Offering a 135-ton pressing capacity and 3050mm bending length, this machine is well suited to a wide range of manufacturing, engineering and subcontract fabrication environments. Rceds Ad U Tuspfx Abush Manufactured by LVD, one of Europe's leading press brake manufacturers, the PBEB series is recognised for its durability, bending accuracy and ease of operation. The machine is capable of handling both one-off and production bending requirements, making it suitable for fabricators working across multiple sectors. Available from our Prestwick, Ayrshire facility, this machine presents an excellent opportunity to acquire a proven CNC press brake from a respected manufacturer. Inspection is welcomed and additional information can be provided upon request.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Condition: Well-maintained Equipment: Gantry milling machine High-Z S-1400T/105 (Rev. 1.5 - Facelift 2016) with ball screws Travel: 1400 x 1050 x 110 mm (X/Y/Z) Machine control Zero-3 (Rev. 1.3) for High-Z series, 5-channel, 110 - 240 Volt, 50/60 Hz Milling kit for High-Z S-1350 or S-1400T/105, additional stabilization of the Z-axis when machining very hard materials Energy arm for S-1350 and S-1400/105 Cable harness for clean routing of cables and hoses from milling motor, spray mist cooling, etc. T-slot plate on base frame for High-Z S-1400T/105 - 1790x1160mm (NL2016) 1790 x 1160 x 76mm T-slot keys, 8 pcs with bridge, M6 - 10 pcs. Rsdpfxszu T Smj Abuoch incl. screws M6x25 6 pcs. clamping bars 50x20x10mm M6 Base frame for combination with enclosure for S-1400T/105 - 1790x1450x900mm (NL2016) SET - Suhner milling motor UAD 30-RF / 1050W - 3,500-30,000 RPM, 230 Volt, 50/60Hz incl. 8mm and 10mm collets Collet set for Kress and Suhner (UAx-30RF) milling motors, 3.00mm / 3.175mm (1/8") / 6.00mm Milling cutter set, 10-piece (shaft 3.175mm) Wood milling cutter: 2x1mm / 2x2mm / 1x3mm Aluminum/plastic: 2x1mm / 2x2mm / 1x3mm Extraction nozzle made of aluminum for Kress or Suhner milling spindle Hose nozzle with Ø 32 and 38mm Dimensions 135x60x30mm Tangential module EOT-3, stroke 3mm Oscillating with 3mm stroke Connection cable for EOT-3 / TCM-4 for High-Z series - 5m Tungsten carbide blade type E12 - cutting edge 12mm Tungsten carbide blade type E18 - cutting edge 13.5mm EcoCam EC-4 continuous cutting pad 4mm / roll width 2m Always delivered in 2m roll width!!! 1m2 = 2 x 0.5m Tangential grooving module TCT-1 Tool holder type KR for grooving module TCT-1 for ball-bearing grooving wheels Grooving wheel B14 Grooving wheel B24 Side channel compressor Rubin 220, 1.5KW/50Hz vacuum pump incl. 3m spiral hose 40mm 230V/50Hz / 9.5A / 190mbar -190mbar / 71dB(A) Maintenance set High-Z series Grease gun + grease cartridge 400g + 100ml oil Network switch 5-port 10/100 Mbit/s + LAN cable 1m, 5x 10/100Mbps-RJ45 ports with auto negotiation Kinetic-NC control software incl. CNC-Pod (LAN), network cable + USB charging cable Vacuum table VT-150100 - 1500x1000mm incl. through-milling mat and connecting hoses Location: NRW Availability: Short-term Sold on behalf of a customer! Technical data without guarantee!

Year of construction: 2026, operating hours: 5 h, condition: like new (used), functionality: fully functional, working range: 500 mm, machine/vehicle number: RC-1-0505, CNC Stud Welding Machine RC-1-0505 consisting of: 2-axis system 500 x 500 mm, motor-driven KAH100 welding head and automatic stud feeding system CDP-99 capacitor discharge (CD) welding unit Stud diameter: M3-M8; length range: 8-25 mm Weldable materials: steel, stainless steel, aluminium Fully enclosed housing with pneumatically operated safety door and additional light curtain safeguarding User-friendly control system The RC-1-0505 stud welding system stands out due to its high-quality equipment and a safety enclosure with protective panels and additional light grid. The system includes a CDP-99 stud welding unit using capacitor discharge technology, a fully automatic stud feeder, and a KAH100 welding head. The working area of the machine is 500 x 500 mm. The system is easy to operate and program, even for inexperienced operators. Welding positions can also be set via teach-in procedure using a crosshair laser and handheld control unit. Model: RC-Z-0505 NEW and unused Working area: X 500 mm x Y 500 mm, motor-driven; Z 150 mm, manual External dimensions: L 1016 mm x W 1350 mm x H 1663 mm Travel speed: max 40 m/min Compressed air: 6 bar; storage tank for pressure fluctuations included Power supply: 380 V / 50 Hz, CEE 16 A connection, 2.5 kW Rjdpoy Stahsfx Abuoch