Used Cnc Lathe for sale (11,559)

Condition: used, Year of construction: 1997, CNC Turning Center VDF Boehringer VDF 250 Cm (NO TAILSTOCK) General Manufacturer: VDF Boehringer Model: VDF 250 Cm Type: CNC slant bed turning center, chuck work Year: 1997 Serial no.: 1114.3705-24 Control: Siemens Sinumerik 840C Location: Korschenbroich, Germany Working area Swing over bed: 550 mm Swing over cross slide: 480 mm Max. turning length: 1,000 mm Tailstock: none (chuck work only) Main spindle Spindle nose: size 8, DIN 55026 Spindle bore: 103 mm Max. speed: 4,500 rpm C-axis: yes Axes X travel: 405 mm Z travel: 1,099 mm Rapid traverse: 10 m/min Feed range: 0.1 to 10,000 mm/min Turret 12 stations, VDI 50 (DIN 69880) Driven tools: yes, up to 2,500 rpm, 5.4 kW Driven tool torque: 25 Nm (standard), 100 Nm (low range) Clamping Hydraulic power chuck, special swivel chuck (Sonderschwenkfutter) Full hydraulic clamping cylinder Equipment Coolant system: 600 l tank, 5.5 bar, 60 l/min Chip conveyor: right-hand discharge Hydraulic unit: Hydrokraft Control cabinet: Rittal, with cooling unit Oil mist extractor: yes Pivoting operator panel Electrical 400 V, 3 phase, 50 Hz Main fuse: 125 A Operating current: 100 A Total connected load: approx. 50 kW Dimensions and weight Approx. 5,400 x 3,200 x 2,400 mm (L x W x H) Weight: approx. 10,500 kg Points to check before sending: Weight. The other listing says about 11,000 kg. I used 10,500 kg because that is what is written on the machine (“10,5 to.”). Chuck make. The listing names a Forkardt chuck. The marking on the chuck in your second photo looked like it could be Röhm, so it’s worth a quick look. resale Chip conveyor. It is not visible in the photos. Confirm it is with the machine. Control model. The 840C comes from the listing only. The screen photo doesn’t show it clearly. Bjdez Rnrrjpfx Abuedi

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC turning machine Okuma LB 400-M Control system: OSP-E100L Year of manufacture: 2005 Internal machine number: 83 Bdedpfj Ahm Upex Abuji Turning length: 1,250 mm Turning diameter: 620 mm Spindle speed: 3,500 rpm Tool turret: 12 stations (powered) Tool holder: VDI 40 Spindle bore: approx. 110 mm 3-jaw chuck Kitagawa B15 Equipment: - Chip conveyor - Coolant system - Touch probe - Tailstock

Condition: reconditioned (used), Year of construction: 2016, operating hours: 20,564 h, turning diameter over cross slide: 742 mm, turning length: 700 mm, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, turning diameter over bed slide: 920 mm, overall weight: 4,700 kg, bar diameter (max.): 80 mm, CNC Lathe Manufacturer: DMG MORI Model: NLX 2500 Y | 700 Year of manufacture: 2016 Control system: Celos Mitsubishi M730U Technical specifications: - Turning diameter: 366 mm - Turning length: 700 mm - Swing over bed: 920 mm Bdodeyvvt Sopfx Abuji - Swing over cross slide: 742 mm - Max. spindle speed: 4,000 rpm - Drive power - main spindle: 18.5/18.5/15 kW - Max. bar diameter: 80 mm - Number of tool stations: 12 pos. - Tool interface: BMT 80 - X-axis: 260 mm - Z-axis: 795 mm - Y-axis: +/- 50 mm - Tailstock taper: MT5 - Operating hours: approx. 20,564 h - Power-on hours: approx. 28,664 h - Machine weight: approx. 4.7 t The machine has been refurbished with the following components: - Ball screws in X, Y, and Z axes - New main spindle - Complete maintenance package - Re-aligned and calibrated This puts the machine in like-new technical condition. Equipment & accessories: - Tool turret, 12 pos. BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang length for driven tools: 100 mm - Scraper-type chip conveyor - High-pressure coolant system (5 bar) - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical interface for 150 mm oil mist collector - 4-color signal light - EtherNet/IP interface for automation 2 machines are available. Price per unit. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, CMZ Turning Center 2 Axes: X, Z Model: TBI-520 CNC: Fanuc Bdedpszqbkcjfx Abuoi Year: 2002 Without Tailstock

Condition: good (used), Year of construction: 2005, functionality: fully functional, FOR SALE CNC Lathe Mori Seiki NL2500Y/700 (year 2005) currently available for sale. Sales Notice: CNC Lathe with Y & C axes Mori Seiki NL2500Y/700 (2005) Original Japanese machine (August 2005), rigid, high-performing, and in good overall condition for your precision machining work. Main features: - Axes: Y axis (±50 mm) + C axis (high-precision spindle indexing) - Capabilities: Maximum turning diameter: 356 mm | Maximum turning length: 705 mm Bdjdpfx Ao Af A Aysbusi - Main spindle: Maximum speed 4,000 rpm | Spindle nose A2-8 | 26 kW motor - Turret: 12 tool positions - Numerical control: FANUC CNC - Actual readings: Power-on time: 31,946 hours | Cutting time: 24,441 hours Included equipment: - Lateral chip conveyor - Tailstock with rotating center - 4 single external chairs for the turret (Machine sold without a chip extraction system)

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T turning spindle Durchlass 75mm chuck diameter 250 mm turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 feed speeds X/Z 15/20 mm/min quill stroke 100 mm diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l Bdjdpoucgxujfx Abusi weight - pallet system 5500 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, In excellent condition, fully functional. Bsdpj Afi Ebefx Abujdi

Condition: used, Year of construction: 1998, functionality: fully functional, The used AVM ANGELINI DG13 2-axis CNC lathe is a medium to large-sized, 2-axis numerically controlled lathe with an inclined bed, featuring a center distance of 850mm, an ASA 8” spindle nose, and a maximum bar capacity of 90mm. It was manufactured in 1998 (installed in 2000), complies with “CE” standards, and is equipped with a FANUC 0-T CNC control. Bjdpfjzu Awfex Abuodi It features a 315mm hydraulic chuck, a 26kW spindle motor, a 12-position automatic tool changer turret (with corresponding tool holders), and is complete with a tailstock, a chip conveyor, manuals, and a “CE” certificate.

Condition: used, Year of construction: 2011, Manufacturer: DMG GILDEMEISTER, Type: NEV 400, Year of manufacture: 2011, Operating hours: 39,722, Spindle hours: 12,928, Control system, Manufacturer: Siemens, Type: Sinumerik 840D, 21" operator terminal ERGOline, Touchscreen, 3-jaw chuck, Tool turret, 12 tool positions, Center distance 805 mm, Turning length 650 mm, Travel X/Z/Z 255 x 800 x 680 mm, Chip conveyor Bdodoz Tlfzjpfx Abuji +++ ATTENTION! This machine is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 560 mm, turning diameter: 560 mm, spindle bore: 63 mm, overall weight: 5,500 kg, Fanuc OT Length capacity: 560 mm Diameter over slide: 340 mm, turning diameter: 560 mm Turret: 10 stations Spindle: 11 kW Bdedjzbam Ejpfx Abuei Chip conveyor

Condition: used, Year of construction: 2023, CNC Lathe Manufacturer: SMEC Model: SL 2000 SY Year of manufacture: 2023 Control system: SIEMENS SINUMERIK 828D Technical details: Control system: SIEMENS SINUMERIK 828D Swing over bed: 650 mm Swing over cross slide: 540 mm Max. turning diameter: 395 mm Bar capacity: 67 mm X-axis: 235 mm Bedpfx Aszzrhyebusdi Y-axis: 105 (±52.5) mm Z-axis: 580 mm Feed rate (X / Y / Z): 24/10/24 m/min Main spindle: Spindle speed: 4,500 rpm Torque: 169.8/89.2 Nm Spindle nose: A2-6 Spindle bore: 76 mm Spindle bearing diameter: 110 mm Drive power - main spindle: 20/10.5 kW Sub-spindle: Spindle speed: 6,000 rpm Torque: 45 Nm Spindle nose: A2-5 Spindle bore: 45 mm Spindle bearing diameter: 90 mm Drive power - sub-spindle: 7.8 kW Tool turret: Number of tool stations: 12 pos. Shank size for square tools: 25 x 25 mm Shank diameter for boring bars: 40 mm Tool interface: BMT 55 Torque of driven tools (max./constant): 44.4/23.4 Nm Total power requirement: 49 kVA Machine dimensions approx.: 4,130 x 1,752 x 2,085 mm Machine weight approx.: 4,200 kg Additional information In our assessment, the machine is in mint condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 14,000 kg, The GOODWAY GS-460L is in good condition. An inspection and functional test under power can be arranged by appointment. The machine comes with extensive accessories, including various chucks, drills, and holders. The machine has a manual tailstock. Technical specifications: Year of manufacture: 2007 Control system: FANUC Oi-TC X-axis travel: approx. 330 mm Z-axis travel: approx. 2,032 mm Max. turning diameter: approx. 610 mm Swinging diameter over bed: approx. 737 mm Spindle bore: 205 mm Spindle speed: 1,300 rpm Spindle motor: 37 kW Tool turret: 12 stations Machine weight: approx. 14,000 kg Bdodpfo Agn I Ssx Abuoi

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: Bsdpfszux Iyox Abusdi 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Bdodpfx Abe Ahkfnouei Control system: Heidenhain CNC-Pilot 640 Technical data: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Bdedpfx Abe Afg Tcouoi Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 240 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 66 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 800 mm, total height: 1,600 mm, total length: 2,750 mm, total width: 1,340 mm, overall weight: 2,000 kg, spindle nose: A2-6, Equipment: documentation/manual, Spindle bore: 66 mm Spindle nose: A2-6 Spindle speed: 30~2500 rpm SIEMENS 808D Advanced control system SIEMENS servo drives Frequency-controlled main spindle motor (5.5 kW) Hydraulic chuck, 200 mm, with hydraulic unit Hydraulic tailstock Automatic turret with 8 stations (20x20 mm) SIEMENS electrical components MK4 live center Cooling system Automatic lubrication system Electronic handwheel Bdodpezzcyasfx Abuei LED work light Machine body made of cast iron Door switch 3-color warning light

Condition: used, Year of construction: 2010, operating hours: 11,658 h, travel distance X-axis: 150 mm, travel distance Z-axis: 470 mm, CNC Lathe Manufacturer: CMZ Model: TC 25 BTY Year of manufacture: 2010 Control system: FANUC Series 31i-Model A Technical details: X-axis: 150 mm Z-axis: 470 mm Number of tool stations: 16 positions Operating hours: approx. 11,658 h Condition: Used Bsdoz St S Tspfx Abusdi Technical features & accessories: - 360° C-axis - Chip conveyor - Filtration system Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 2023, CNC turning machine Manufacturer: DMG Mori Machine model: CLX 350 V3 Control system: SIEMENS Slim Line Multi Touch Year of manufacture: 2023 Bdodpez Sa Svsfx Abusi TECHNICAL DATA Travel distances - C-axis, degrees: 360 Spindle - Spindle head - Bar diameter: (mm): 66 - Max. speed: (rpm): 5,000 - Drive power 100% duty cycle: (kW): 11 - Drive power 40% duty cycle: (kW): 16.5 Turret - Tool positions: 12 - Tool positions for driven tools: 12 - Tool holder: VDI30 Tailstock - Hydraulic, controlled via M-function EQUIPMENT FEATURES + C-axis + Through-hole chuck, diameter 65 mm (max.) + Direct measuring system for the X-axis + Chip conveyor + Electronic handwheel + 3-jaw chuck, diameter 210 mm (hydraulic) + DMG Mori IoT connector + Coolant spray nozzle, 5 bar + Hydraulic tailstock + Tool package - Chip conveyor not included Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 2024, spindle bore: 44 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 300 mm, spindle motor power: 7,500 W, total height: 1,800 mm, total length: 2,500 mm, total width: 1,300 mm, quill diameter: 32 mm, overall weight: 3,500 kg, CNC Lathe with c-axis QuickTech - T6 MILL MACH-ID 9822 Make: QuickTech Type: T6 MILL Control: Mitsubishi Touch YOP: 2024 Max. turning Ø: 400mm X-Axis: 200mm Z-Axis: 300mm Spindle bore: 44mm Speedrange: 5000Rpm Bdodez H I Haopfx Abuoi Spindle power: 7.5kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Pinole taper: 4Mk Stroke pinole: 70mm Quill Ø: 32mm Length: 2500mm Width: 1300mm Height: 1800mm Weight: 3500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, spindle bore: 150 mm, spindle motor power: 95,000 W, total height: 3,800 mm, total length: 16,000 mm, total width: 5,000 mm, overall weight: 80,000 kg, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Bdjdpfx Aez Sy Twobuoi Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. Bsdpfx Abjzl D Rujusdi The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2019, Smec Revolver, unused, BMT 55. Bodpjzw Uz Iefx Abusdi

Condition: good (used), Year of construction: 2012, functionality: fully functional, Center distance (mm) 450 Turning diameter (mm) 500 Turning length (mm) 300 Bjdpfjz At Absx Abuedi Turning diameter (mm) 200 Bar passage (mm) 52 Spindle speed (rpm) 6000 Spindle power (kW) 15-20 Travel in X-axis (mm) 190 Travel in Z-axis (mm) 335 Rapid traverse rate (m/min) 30 Tool positions 12 Tool holder VDI30 Number of turrets 1 Number of driven tools 12 Weight (kg) 3800 Dimensions (L×W×H) (mm) 4260 x 1710 x 1820 Spindle hours (h) 20000 Manufacturer DMG Year of manufacture 2012 Control system Siemens 840D sl with ShopTurn

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 450 mm, turning diameter: 310 mm, CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Bodpozvlnvefx Abusdi Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / drive capacity main spindle 11/9 kW Gewicht der Maschine ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: not inspected (used), Year of construction: 2003, turning length: 380 mm, turning diameter: 284 mm, spindle speed (max.): 5,000 rpm, overall weight: 2,300 kg, siemens maximum spindle speed: 5,000 RPM VDI turret, 12 stations tooling Bjdpox Rbwxefx Abuodi chip conveyor