Used Cnc Machining for sale (64,810)

Year of construction: 1993, condition: ready for operation (used), A Fanuc CNC wire EDM machine is available. Travel X/Y: 350mm/500mm, max. workpiece dimensions X/Y/Z: 450mm/650mm/300mm, max. workpiece weight: 500kg, machine dimensions X/Y/Z: approx. 2600mm/2550mm/2200mm, weight: approx. 2300kg, operating system: Fanuc Series 16-WA. Documentation available. An on-site inspection is possible. Chedpozqu E Tsfx Amhsa

Condition: ready for operation (used), Year of construction: 2006, A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: approx. 18300mm/9750mm/3500mm, Machine dimensions X/Y/Z: approx. 4200mm/1600mm/3000mm, Machine weight: approx. 10500kg, Control system: Siemens Sinumerik 840D power-line. Including fully automatic infeed and unloading, 2×gantry cranes, safety equipment, various tools and a self-lowering roller table. This system was modernized in 2016. Documentation vorhanden. An on-site inspection is possible. Csdpfx Aozqu Hwsmhjha

Condition: used, Year of construction: 2020, includes accessories Cedpozn N Iqsfx Amhsha Working width 950 mm 4-position tool changer, side-mounted Location: Nattheim

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm. Cjdetp Dhpepfx Amhjha  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: excellent (used), Year of construction: 2012, · V200 Plate drilling machine (executed with a VD40 drilling unit and an X-Y coordinate table). · VTC 8/40 tool changer (8 places). · Hydraulic numbering unit VN 1/16 · Deburring unit VDB 2 (each hole is automatically deburred). Max. length 1.400 mm* Max. width : 1.000 mm Min/max. thickness : 3 - 60 mm Capacity : : 600 kg Chsdewphgdopfx Amhja * Longer lengths (max. 2 400mm) possible by automatic repositioning.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) Csdjvpalajpfx Amhoha ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Year of construction: 2007, condition: good (used), ■ V600 Drilling machine (moveable drilling cabinet, executed with 1 horizontal drilling unit and automatic tool changer) ■ Drilling table with power rail length 15 metres, effective length 12 metres ■ Hardware and software (includes VACON 110 machine control) Chsdpfoq Hgg Ujx Amhoa ■ Safety devices (safety bumpers) ■ Year of construction 2007

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Chjdpfxoy D Rv Do Amhja

Condition: excellent (used), Numerical Control Type Power Control PC85T Software WoodWOP + TOPDRILL No. 2 Through-feed motorized conveyoring belts Chjdezrd Sfjpfx Amhea No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 35

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Cedpfx Aorfw Nhsmheha Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places chip conveyor

Condition: ready for operation (used), Year of construction: 2016, A Burkhardt + Weber heavy-duty CNC large-format machining center is available. Axis travel X/Y/Z: 1600mm/1250mm/1250mm, tool interface: SK50, pallet dimensions X/Y: 800mm/1000mm, 125mm tool pockets: 95, 225mm tool pockets: 7, 350mm tool pockets: 5, 420mm beam tool pockets: 5, coolant system capacity: 1900l, control: Siemens 840D with ShopMill, operating hours: approx. 20000h. Including coolant system with paper band filter, machine enclosure, through-spindle coolant, external coolant nozzles, chip conveyor, dual-gripper tool changer and HV-NC swivel head. Documentation available. An on-site inspection is possible. Cjdpfx Amjzp Rgqshoha

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Cjdpfx Amozf Hyrehsha Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm Chedpfx Aofbma Njmhea -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: good (used), Year of construction: 1994, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: Knuth, CNC tool milling machine type WF 5 NC -Clamping table: 800 x 330 mm -Travel: X/Y/Z 400/330/440 mm -Spindle holder: SK40 -Quill stroke: 60 mm -Speeds from: 63 to 3150 rpm -Coolant system -Accessories: including extensive accessories see photos -Dimensions: Machine: 1500/1345/H1900 mm / Control cabinet 750/450/H1730 mm -Total weight: 1960 kg Chedpfowyivnsx Amhja

Condition: excellent (used), Year of construction: 2013, FEELER VB-1650 CNC Vertical Machining Centre Control FANUC 31i-TB Year 2013 Table size 800 x 1900 mm Travels XYZ 1650 x 800 x 700 mm Spindle nose to table 145-845mm Spindle centre to column 850mm Spindle speeds to 8000 rpm Spindle taper BT 40 Spindle motor 26 kW Number of tools 30 ATC Cjdpfxjzd Dfie Amhsha Rapid traverse X & Y 20 m/min, Z 18 m/min Weight 13000 kg Supplied wtith: Part probing, BLUM tool probe, Swarf Augers, Swarf conveyor, Spindle chiller, Filtermist FX7002. Tooling Package. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #27002 Machine Serial Number: VHE133 Cost: £39,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Chedpfsy Tpz Rsx Amhoa Location: Supplier.

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Included with the Milling Machine Becker KVT 3.140 Vacuum Pump Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1500x3000x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: Cedpfxetu S Sro Amhjha For transport - 365 / 210 / 220 Machine assembled and ready to work - 365 / 245 / 230 Hybrid table, i.e. vacuum table enabling non-invasive element fixing, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller A tool height sensor is included A central oil lubrication system for trolleys and guides as standard The drive is transferred via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation

Condition: ready for operation (used), Year of construction: 2024, Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspection is possible. Csdpfozpyw Sex Amhsha

Year of construction: 1998, condition: ready for operation (used), A Unisign CNC 5-axis large-format portal milling machine is available. Portal clearance height: 1200mm, tool stations: 35/53, tool interface: SK50, travel X/Y/Z: 10000mm/2000mm/800mm, table dimensions X/Y: 11750mm/1670mm, max. table load: 2500kp/m², max. table-to-spindle nose distance: 1200mm, main spindle power: 26kW, spindle speed: 6000rpm, feed rate: 24m/min, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 14000mm/5800mm/4000mm, weight: approx. 45t, control: Siemens Sinumerik 840C. Including automatic angular milling head coupling and decoupling, spindle orientation system, rigid tapping, through-spindle coolant, workpiece probing system and two-station pendulum operation. Documentation available. An on-site inspection is possible. Csdpfxozpyw Ej Amhjha

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Codpfx Aex Twd Hsmheha Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Location: Nattheim

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING HEAD "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL" XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (stop inner side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / Number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Traverse speed X-Y axes Pro-Speed m/min 85 Speed Z-axis m/min 30 INSTALLATION Installed power KVA 62 ÷ 82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in a portal design and worktable with workpiece supports, for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutters - general milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded-in supports over the entire machine bed, making it extremely stable. The table design, with a large base, is the secret to ensuring lasting precision and stability. The machine layout enables the user to have an optimal workflow with a minimum of space requirements. The mobile portal beam is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via ball screw slides. On this mobile aggregate carrier, the working aggregate is in turn attached to prismatic, ground guides and ball screw slides. AXIS MOVEMENT The displacement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and fast positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the work unit along the moving portal (Y and Z axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by the high-quality drives and brushless motors, which are designed to achieve a speed of up to 90 m/min while maintaining the best surface finish. CONTROL The control unit consists of a numerical control for the milling and drilling machine with "Xilog Maestro" graphical user interface on a Windows 7 operating system - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine operating interface with Xilog Maestro software Xilog Maestro Features Programming - parametric graphical programming - Import of DXF files (2D; the geometries "SPLINE", "POLYLINE 3D", lines or circle interpolation in three axes, linear in space, spiral in the selected plane - supported programming with graphics and syntax aids for drilling and milling operations - automatic optimization of drilling operations and tool changes - cycles - possibility of panel zero-point shift to perform drilling on inclined or curved panel sides Chjdpfx Aey Dta Sjmhja

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Chsdpfxsx Twdyo Amhea

Condition: used, Year of construction: 2006, * Work area: 2,650 x 1,240 mm * X-Y travel: 2,995 x 1,385 mm * Z-axis travel: 200 mm * Clearance height: 180 mm Chedpsx Twccofx Amhoa C-axis deactivated - 3-axis machine The structure of the base body is a monolithic construction made of thick-walled steel. It is reinforced throughout the machine bed by welded triangular plates, making it extremely stable. The triangular shape used for the supporting parts, with a large base, is the key to long-lasting precision and stability. The machine's layout allows the user an optimal workflow despite minimal space requirements. The base body, constructed in this way, provides the machining unit with a balanced and secure base with particularly good load distribution. The mobile unit carrier is made from a solid monoblock. It is positioned in the X-direction on prismatically ground guides via ball screw slides. The machining unit is, in turn, attached to the mobile unit carrier on prismatic, ground guides and the ball screw slide. Description of units and accessories (base) Drilling unit: Drilling head with 12 + 6 spindles * 7 individually selectable vertical spindles in X * 5 individually selectable vertical spindles in Y * 4 horizontal spindles in X (2+2) * 2 horizontal spindles in Y (1+1) * Speed: 4,000 1/min * Power: 2.2 kW * Grid: 32 mm * Drill chuck: M 10 with Morse taper No. 11 Nut saw unit in "X": * Integrated in the drilling head * Nut saw blade with a diameter of up to max. 120 mm Main milling unit (Position 2): * Tool holder HSK 63F * Speed 1,500 - 24,000 1/min, stepless via inverter * Motor power 4.4 kW (6 hp) from 12,000 1/min (S1) * Motor power 6.6 kW (9 hp) from 12,000 1/min (S6) * Right/left rotation * Ceramic bearings * Scope of supply: 4 pcs. tool holder (right) without collet Tool changer R8L Automatic tool changing device for 8 tools. Mounted on the rear unit carrier for quick access to the tools. * Number of tool positions: 8 * Max. tool diameter: 120 mm * Max. weight per tool: 4.5 kg * Max. total weight of all tools: 22 kg * Holder for 1 angular gear * Mounted and moving in X Horizontal milling unit (Position 1) Horizontal unit with two opposite outlets for milling and grooving. * Speed 9,000 - 18,000 1/min, stepless via inverter * 1 outlet for collet 3-20 mm (ER 32) * 1 outlet for saw/collet 3-12 mm (ER20) (For saw D=120 mm / bore 50 mm) * Motor power 3 kW (4 hp) * Max. tool diameter, front milling: 20 mm * Max. tool length, front milling: 110 mm * Max. tool diameter, rear milling: 12 mm * Max. tool length, rear milling: 80 mm * Max. saw blade diameter: 100 mm * Bore in saw blade (ER 32): 50 mm * Arbor diameter, saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum "freedom of movement". The vacuum quick-clamping system offers maximum flexibility with precise positioning and optimal workpiece clamping. * 6 supports 1000 mm, stepless pneumatically adjustable in X * 12 vacuum suction cups, round D = 110 mm, steplessly adjustable in Y (2 pcs. per support) * 2 stops in X (1 x left / 1 x right) * 1 stop in Y per support (total 6 pcs.) * The retractable reference stops are CNC-controlled * Pendulum machining standard (2 working areas) --- other clamping systems are available as optional extras --- Axis movement The drive system in X, Y and Z is via ground ball screws.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Chjdpfjyuw Srjx Amhea Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: good (used), Year of construction: 1996, Machine will come with tool holders. Cedpfxszncpzo Amhjha Parts shown by hand not come. Technical details shown on picture.