Used Cnc Plasma Cutting Machine for sale (66,919)

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Swift Cut (ESAB) Type: Pro 2500 Year of manufacture: 2023 Working area: 1,250 x 2,500 mm 1 plasma torch with Hypertherm Powermax 125 power source Cutting thickness up to approx. 30 mm Dwedpfj Aivxkox Aizjd Water table - no filter system required Table weight (empty): approx. 1,000 kg Table footprint: 3,226 mm × 1,840 mm Automatic torch height control (Intelligent Torch Height Control - ITHC) Workpiece collision protection (Breakaway Head) and sheet alignment via software Compressed air requirements: Clean, dry air (ISO 8573-1 Class 1.2.2), 7.0–7.5 bar, approx. 300 l/min. Cutting software 101126

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord. Dodpfx Aijtp Dhpjzswd  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) Dwsdpfsvpalaox Aizod ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: new, Year of construction: 2026, functionality: fully functional, sheet thickness (max.): 350 mm, sheet thickness steel (max.): 20 mm, total width: 2,450 mm, total height: 2,350 mm, total length: 4,800 mm, cutting height (max.): 350 mm, workpiece weight (max.): 6,500 kg, warranty duration: 36 months, space requirement length: 3,150 mm, space requirement height: 5,000 mm, space requirement width: 2,450 mm, Equipment: documentation/manual, The Bluemotion HCP Series CNC Plasma is engineered for fabricators who demand precision, reliability, and ease of use. Designed and manufactured in Ireland, every HCP Series machine is built using premium industrial components and supplied with industry-leading Hypertherm technology as standard, delivering exceptional performance from the very first cut. Standard Features: - Hypertherm Edge® Connect CNC Control - Hypertherm ProNest® CAD/CAM Software Included - 350mm Gantry Clearance for processing sheet metal, 3D Profiles - Bosch Rexroth Linear Motion Components - Fully Servo Driven Axes with Servo Motors & Drives - Sealed Energy Chains for max. reliability in harsh workshop environments - Integrated Laser Pointer for fast and accurate plate alignment - Intelligent 3D Collision Detection to protect the torch and machine - Heavy-Duty Welded Steel Construction - Intuitive operation with a streamlined workflow from CAD to cut. - Comprehensive Commissioning & Operator Training From importing a DXF into Hypertherm ProNest to producing finished components, the HCP Series has been designed to maximise productivity while remaining straightforward to operate. Whether you're producing one-off prototypes or high-volume production work, the HCP Series delivers the accuracy, speed and reliability modern fabrication businesses expect. Every Bluemotion machine is backed by expert technical support, professional installation, and ongoing after-sales service to ensure you get the maximum return on your investment. Dwedpszpzwmjfx Aizsd This price includes: - Hypertherm 85A SYNC Plasma Source (20mm Pierce Capacity) - 3-Year Full Machine Warranty Built in Ireland. Trusted by fabricators. Designed to perform.

Year of construction: 2013, condition: used, Working area: 6000x2000mm, max. material thickness: 100mm, max. positioning speed: 35,000mm/min, machine height: approx. 1518mm, operating hours: 24,472h. Equipment: Kjellberg HiFocus 161i plasma power source, axis control: digital, maintenance-free DC servos with IRC, linear guides in X and Y directions, helical gearing on all axes, gantry-type CNC cutting machine, complete guide unit with accessories and cable drag chains, dual-side driven gantry bridge, sharp angles and corners, high contour accuracy, sectional under-table extraction system, gas control: automatic gas console, cutting technology: Contour Cut Speed, measuring system: IRC 2500 (incremental encoder). An on-site inspection is possible. Djdps Ahq Nrsfx Aizswd

Condition: excellent (used), Year of construction: 2019, operating hours: 43 h, functionality: fully functional, machine/vehicle number: PR4-3000-0719-0385, input voltage: 400 V, working width: 1,500 mm, working length: 3,000 mm, control type: CNC control, Swift-Cut Pro MK4 CNC plasma cutting table, 3000 x 1500 mm cutting bed. Bought new from Swiftcut Automation Ltd in August 2019 and used for in-house fabrication work by a controls and automation company. Machine and equipment: - Swift-Cut Pro MK4 3 m x 1.5 m water table with integrated control console - Hypertherm Powermax45 XP plasma power source, 400 V 3-phase - Hypertherm Duramax 180 machine torch, 35 ft lead - 5 m work lead - Swift-Cut MK4 engraver system (V2) Dsdpfxo Ahikqs Aizewd - Twin positioning lasers - Swift-CAM Standard software - Control PC with keyboard, Wi-Fi and network card Manuals available: installation, operation and pre-installation guides, plus engraver/marker setup guide. Viewing welcome by appointment at our Sunderland workshop. Collection by buyer. Prices exclude VAT.

Condition: used, Year of construction: 2023, Manufacturer: Plasmatreat GmbH, Steinhagen, Made in Germany Type: PTU1212 Serial no.: 10715 Commission no.: 262904 Year of manufacture: CW 19/2023 Power supply: 3~ / 400 V / 230 V AC / N / PE, 50–60 Hz Imax / fuse: 12 A / 3 × 16 A Icw: 0.64 kA Marking: CE Equipment (as per photos and HMI) KUKA articulated robot for part handling within the cell. Plasma nozzle system PFW10PAD (designation as per HMI). PlasmaPlus® unit (HMI function “PPlus”) with vaporizer, gravimetric precursor dosing, MFC/GFC gas control for process and carrier gas, and precursor reservoir. Plasmatreat touch HMI on a support arm, with recipe management, set/actual and tolerance monitoring of all process parameters, emergency stop and control buttons. Fully enclosed safety housing with glazed doors, signal light, main switch, and extraction connection. Mobile control unit with push buttons. TBH extraction and filter unit, connected to the cell via a flexible hose. Please note: * Sold in the name and on behalf of BorgWarner Turbo Systems. * Location: Kirchheimbolanden, Germany * Not included: workpieces, work tables and part carriers, pedestal fan Dwedpfxe Air S Es Aizod * The machine is currently not in production and has been stored.

Year of construction: 2026, condition: new, NEW Plasma Cutter. Includes CAD/CAM software. Data transfer (DWG and DXF formats) via USB and network card. CE marked. ISO 9001, GB/T 19001 certified. Djdpe Afnrgefx Aizowd 120 A generator. The production cost is incredibly low: only 5.5 kW and compressed air are required! Maximum cutting thickness (steel): 22 mm Maximum cutting thickness (aluminum): 16 mm Maximum cutting thickness (stainless steel): 12 mm

Condition: used, Year of construction: 2013, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact P 6001.20 Year of manufacture: 2013 Working area: 2,000 x 6,000 mm 1 x plasma torch with HiFocus 161i power source with automatic gas console and Contour Cut Extraction table Dwsdpe Ahx Stsfx Aized 41126ä

Condition: used, Year of construction: 2019, operating hours: 640 h, functionality: fully functional, Becky Job Master 6.20P CNC plasma cutting system Year of manufacture: 2019 Power source: Hypertherm XPR170 Dwedpfx Aez Dr Rdjizsd Machine software included, nesting software excluded Donaldson extraction system, 5.5 kW The machine is being sold due to the purchase of a laser cutting system.

Condition: used, Year of construction: 2020, operating hours: 80 h, machine/vehicle number: pr5-3000-08200667, type of cooling: water, Equipment: documentation/manual, Swift-Cut Pro 3000 plasma cutting table. I have not personally operated this machine. The machine is in very good condition. It has been used for very few hours, and I would rate its condition as close to new. The set includes a Hypertherm Powermax 105 power source. Sold without warranty or guarantee. Dsdpfx Aisz Ixzkszjwd

Condition: excellent (used), Year of construction: 2022, Ref: 11171 . 2022 IML S74/13 Pneumatic Corner Cutting Machine Dodpfxj Ah D Sns Aizswd Single-head pneumatic corner cutter for paper and board finishing, suitable for bookbinding and cover-making applications. Specification: Operation: Pneumatic Cutting thickness: 0–35 mm Cutting stroke: 50 mm Cutting angle: Dependent on fitted tooling Overall dimensions: 700 × 550 × 1,250 mm (L × D × H) Weight: Approximately 100 kg

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse Djdpfoy Snwnjx Aizewd - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: used, Year of construction: 2023, functionality: unexamined, total width: 3,000 mm, total length: 6,000 mm, Equipment: documentation/manual, We are selling our CNC plasma cutting machine at our Krefeld-Linn location. Unfortunately, this excellent machine is not being fully utilized, so we are offering it for sale. It is suitable for plasma and oxy-fuel cutting. The machine is operational at the location and can be inspected or tested while in operation with some advance notice (personnel must be present on-site, gas must be available). Bevel cutting and marking of components were the applications that, in addition to the generally high quality of the machine and the cut edges, always impressed us. New price in 2023: EUR 290,000 plus VAT (including installation). Machine designation: MasterCut 6001.30PtkG Plasma rotator "MasterCut" for weld preparation with the Kjellberg® Q 3000 plasma power source Oxy-fuel support, fully automatic Total working area: approx. 6,000 x 3,000 mm Max. travel height: approx. 150 mm Max. table load: approx. 150 mm Guideways in X-direction: milled S49 rails Drives: digital, maintenance-free AC servo motors with IRC Positioning speed: up to 30,000 mm/min Positioning accuracy: ≤ 0.15 mm/m Bidirectional repeatability: 0.05 mm/m 1. Control PC 2. USB 3.0 connection for storage media 3. Remote maintenance module MicroStep RemoteDiagnostics® 4. Flame cutting table with sectional extraction | 6,000 x 3,000 mm 5. Grid cover in the flame cutting table | 6,000 x 3,000 mm 6. Reinforced design of the flame cutting table | 6,000 x 3,000 mm 7. Kjellberg® plasma power source Q 3000 8. Connection of the fine plasma source to the CNC control 9. Control of the automatic gas console 10. Electrical and mechanical torch sensing 11. Integration of an existing Kemper filter system, Type System 8000 with a capacity of 7.5 kW. 12. LED signal column on the portal bridge (2 colors) 13. Tactile shut-off device for guideways 14. Light curtain protection (collision protection) of the portal bridge via emergency stop 15. Smart Z Movement 16. Plasma rotator "MasterCut" with fully automatic support 17. ACTG® - Automatic calibration unit for the bevel cutting unit 18. ACTG® Calibration Report 19. Oxy-fuel support | fully automatic 20. Automatic gas console for oxy-fuel torch (cutting gas: acetylene) 21. Machine cutting torch GCE® FIT+ three (cutting gas: acetylene) 22. Active collision protection 23. Asper Basic® | The 2D programming software (single-user license) Dsds Aihalopfx Aizowd including gas system and extraction. We can dismantle and load the system at the buyer's direction and risk.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA2/002546, functionality: fully functional, travel distance X-axis: 7,033 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 1 Number of controlled axes: 5 Dwsdpfx Aie Aidx Hszed Spindle speed: max. 8,000 rpm Main motor power: 11 kW C-axis: Available Tool holder: HSK-F63 Table design: Cantilever table Table length: 5,200 mm Table width: 1,300 mm Working area X-axis: 6,350 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Travel range X-axis: max. 7,033 mm Travel range Y-axis: max. 1,940 mm Travel range Z-axis: max. 475 mm Drilling tool: Available Motor power: 3 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 10 Tool changer positions: 24 MACHINE DETAILS Vacuum pump: Becker VTLF 250 Year of manufacture: 2008 Main motor power: 5.5 kW Capacity: 300 m³/h Connection diameter: 70 mm Oil-free: Yes Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Installed length: 11,000 mm Installed width: 3,900 mm Installed height: 3,000 mm Transport weight: 6,600 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: used, functionality: fully functional, SAF Plasmatome 20 with Digisaf 100 control system. Dsdj Ahw Duspfx Aizswd The machine is suitable for plasma cutting of sheet metal and is in used condition. The system is equipped with a CNC Digisaf 100 control system. Inspection and testing are possible by appointment. Sale as shown in the photos.

Year of construction: 2013, condition: used, 2013 Neway GVM 850 H CNC Machining Center with Fanuc 0i-MD Controller X / Y / Z Axis Travel: 850 mm × 520 mm × 560 mm. Table Dimensions: 950 mm × 520 mm. Distance spindle to table: 150-710 mm. Maximum Table Load: 600 kg. Spindle Taper: BT40. Spindle Speed: 8,000 RPM. Spindle Motor Power: 7.5 kW continuous / 11 kW peak. Control System: Fanuc 0i-MD. Tool Magazine (ATC): 24-station arm-type. Rapid Traverse (X/Y): 30 m/min. Rapid Traverse (Z): 24 m/min. Note: Machine located in 32-640 Zator, Poland. Dwsdpe Ahq Dmjfx Aizod Machine dimensions: 3672 x 2414 x 3000 mm. Machine Weight: 6,000 kg

Condition: used, Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 13501.30 Year of manufacture: 2012 Working area: 3,000 x 13,500 mm Dwodpjz H I Auofx Aizod 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console 31126ä

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Dsdpfxszizkyj Aizewd Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Year of construction: 2010, condition: ready for operation (used), Max. sheet dimensions: 6050x2550mm, max. cutting speed: 10m/min, length: 8125mm, width: 3800mm, height: 1900mm, with documentation, an on-site inspection is possible. Dedjri Skaspfx Aizowd

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Dwedpfezkbirsx Aizsd

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm Dwjdpfxey Sxvhj Aizsd - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 72.122, functionality: fully functional, number of axes: 3, overall weight: 1,500 kg, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of controlled axes: 3 Working area X: 2,500 mm Working area Y: 900 mm Working area Z: 70 mm Milling spindle Number of milling spindles: 1 Tool holder: ISO 30 Spindle speed: 12,000–24,000 rpm Spindle speed control: Stepless Number of horizontal drilling spindles: 6 Number of vertical drilling spindles: 10 MACHINE DETAILS Dsdpj Af Hgpefx Aizowd Voltage: 400 V Current consumption: 22 A Fuse rating: 32 A Main motor power: 4 kW Connected load: 12 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 2,600 x 2,700 mm Weight: 1,500 kg Number of transport packages: 1 EQUIPMENT Horizontal drilling unit Vertical drilling unit Sawing unit Manual operation

Condition: new, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 60 mm, kaitec Smart – PROFESSIONAL CUTTING TECHNOLOGY FOR PROFESSIONALS With the highly economical plasma process, material thicknesses of up to 25 mm can be cut with optimal precision. Automatic initial height sensing, automatic arc regulation, and intelligent collision protection ensure maximum quality and the highest repeat accuracy. The automated program sequence and the long service life of consumables actively help to significantly minimize cutting costs. The oxy-fuel cutting process also impresses with its straightforward handling and functionality. Thanks to the automatic piercing function, preheating times and the supply of cutting oxygen are controlled by CNC. This allows plates up to 80 mm thick to be cut very cost-effectively. The oxy-fuel system is available for acetylene or propane gas and is equipped with automatic height control. kaitec Smart – WATER TABLE SYSTEM The foundation of the flatbed design is a stable water table. The longitudinal guide mechanism is mounted with high precision on machined surfaces. The robust cutting grate features staggered, serrated support slats, providing optimal support for sheets and reducing slag formation on workpieces, as well as excessive wear on the slats, ultimately saving substantial costs on rework and maintenance. The tank depth is precisely designed to accommodate slag and support its cooling, is easy to clean, and effectively captures dust generated during cutting. Cutting area: 1,500 x 1,500 mm 1,500 x 3,000 mm 1,500 x 4,000 mm Material thickness Plasma: 1-25 mm Dwsdpfx Asx Ngn Tjizjd Material thickness Oxy-fuel: 10-80 mm We look forward to hearing from you!

Condition: used, Year of construction: 2021, functionality: fully functional, sheet thickness (max.): 25 mm, working width: 1,500 mm, hose package length: 10,700 mm, working length: 3,000 mm, CNC Plasma Cutting System Swift-Cut Pro 3000 MK 5 – Complete Manufacturing Cell incl. Portal Crane & Hypertherm 105 SYNC Description Dsdpfx Aio Ah Eu Eezswd For sale is a professional, fully functional, and immediately ready-to-use CNC plasma cutting system, type Swift-Cut Pro 3000 (MK 5). The system was acquired from the renowned specialist dealer Heidenbluth Schweißtechnik and set up as a well-thought-out, turnkey manufacturing cell. The machine is in operation, has few operating hours, and can be inspected and tested while powered on. Scope of Delivery & Technical Equipment • CNC Cutting Table: Swift-Cut Pro 3000 MK 5 with a working area of 1,500 mm x 3,000 mm. Equipped with a sectional extraction table, Soft-Sense height sensing, collision protection, and a robust steel frame with integrated forklift attachment. • Plasma Power Source: Hypertherm Powermax 105 SYNC (year of manufacture 04/2021) incl. CPC connection, voltage divider, and serial interface for precise cuts up to 25 mm sheet thickness. • Cutting Torch: Machine cutting torch Smart SYNC 180° (10.7 m). • Material Handling System (Portal Crane): Solid, custom-made steel crane frame including a heavy-duty trolley with chain hoist for ergonomic loading of large-format sheets. • Marking System: Integrated marking system PRO. • Exhaust & Compressed Air: Powerful exhaust fan set (radial fan with wall console) for long duct runs including approx. 20–25 m of flexible ducting. Integrated Camozzi compressed air maintenance unit and a water separator Dropout 600 A. • Control & Software: Industrial control console with touchscreen monitor, PC and LAN connection. Including full versions of SWIFT Wizard 3 (automatic nesting) and SWIFT Cam Wizard 3 (incl. 2nd license with dongle for an additional external workstation). • Accessories: Comprehensive set of wear parts (SYNC 45A to 105A, FineCut nozzles, electrodes and wear parts box). Sales and Delivery Conditions • Price: €28,500 (net) OBO (or best offer) • Location: Schleswig-Holstein • Availability: Immediately • Delivery: The sale is intended for self-collection. Assistance with loading on-site is possible upon agreement using a forklift. Dismantling of the ceiling structure (crane) and the piping is carried out by the buyer after consultation.