Used Cnc Tube Bending Machine for sale (65,371)

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Capacity: up to approx. 40 mm Bsdpsyfmwxofx Aa Nowi Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Year of manufacture: 2009 Very little used

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Bsdpfeyqxnajx Aa Njwi Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Drive: Hydraulic cylinder and roller chain

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm Bwedjyqxmpjpfx Aa Noi - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Bwjdpfxoyqxkno Aa Nji Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Tube feed length: 4500 mm Bsdpsyqvnkofx Aa Njwi Machine weight approx.: 0.11 t Total power requirement: kW Space requirement approx.: 5700 x 1600 x 900 mm - Preselection of 4 bending angles via rotary selector

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, Tube diameter: 168.3 x 11 mm Insert length of tube: 6000 mm Bwodpfx Aeymzlmja Noi Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190° Connected load: 400 V / 50 Hz / 85 A Dimensions (L x W x H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection rating: 400 V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Tube Ø 48.3 mm; Radius 105 mm Tube Ø 60.3 mm; Radius 120 mm Tube Ø 63.5 mm; Radius 150 mm Tube Ø 76.1 mm; Radius 190 mm Tube Ø 88.9 mm; Radius 222 mm Tube Ø 114.3 mm; Radius 285 mm Tube Ø 139.7 mm; Radius 350 mm Tube Ø 141.3 mm; Radius 700 mm Tube Ø 168.3 mm; Radius 420 mm There were a few mandrels with a marking engraved directly on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approx. €150,000.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 38900 € 742.99 € 64 mm 4000 mm 950 mm 1250 mm 850 kg 10 cm³ 64 x 3,3 mm 2" mm 60,3 x 2,2 mm 60 x 60 x 2 mm 40 x 60 x 4 mm 60 x 40 x 3 mm 76 mm 200 mm 20 mm 210 ° 4.2 kW 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck Bwodpfx Aaeynmtfo Noi ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 32900 € 628.39 € 50 mm 4000 mm 950 mm 1250 mm 430 kg 6 cm³ 50 x 3,31 mm Ø 1”1/4 mm Ø 50 x 2,5 mm 40 x 40 x 4 mm 25 x 50 x 6 mm 50 x 25 x 2,7 mm 60 mm 200 mm 20 mm 210 ° 1,25 / 2,5 3.5 kW 15 l With mandrel 3 m length Bwjdpfx Aaoynmrne Nei Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW Bwsdpfeylyh Dsx Aa Noi - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Year of construction: 2023, condition: ready for operation (used), Bending length: 3230mm, max. press force: 1300kN, back gauge axes: 6, operating hours: approx. 10000h. Including tool clamping system, BendGuard, crowning system and back gauge system. Documentation available. An on-site inspection is possible. Expected to be available from April 2026. Bwsdpfx Aasykbf Us Noi

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Bwedpou Ibvujfx Aa Nei Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: good (used), functionality: fully functional, Year of construction: 1998, Bending capacity for steel tube: 60x3 mm Bending capacity for stainless steel: 60x2.5 mm Bending capacity for solid material: 35 mm Bwodpfx Aeyhgv Hja Nsi Bending speed: 2 rpm Bending capacity for hard copper & aluminium: 64x4 mm Max. bending radius: R10–R300 mm Total power requirement: 1.5 kW Machine weight approx.: 130 kg

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Bodpfxsya Iaqe Aa Njwi Weight: 17,000 kg Good condition

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Bsdpfx Aaoxcx Atj Nswi

Condition: ready for operation (used), A CNC flat wire vertical wire bending machine V&C GmbH is available. Wire thickness range: 0.8mm-10mm, max. wire width: 30mm, min. winding inner diameter: 20mm, max. winding outer diameter: 250mm, max. winding height: 160mm, max. winding height with holding rod: 500mm, max. winding length: 250mm, min. bending radius: R6°, max. number of edges: 12/revolution. Machine dimensions X/Y/Z: approx. 2650mm/1000mm/1800mm, weight: approx. 800kg. Documentation available. On-site inspection is possible. Bwodpfxjycwtfj Aa Noi

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) Bodpfx Aaohmmfke Nowi - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) Bjdpfx Aajxpqy Ds Njwi - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide Bjdpew Iq Ugefx Aa Nowi - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Bodpsnvfc Eofx Aa Newi

Year of construction: 1984, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. Bjdpfxjnvfcts Aa Newi

Condition: good (used), functionality: fully functional, Year of construction: 1995, Tube bending machine by MARK / Ridgid Type: 2H B Without tools Bwodpfxjx Ivpwo Aa Nei

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data Bwjdpfx Ajx E Rdwsa Noi - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter (max.): 600 mm, pipe length (max.): 1,500 mm, bending angle (max.): 180 °, bending radius (max.): 200 mm, wall thickness: 3 mm, Original machine year: 1996. In 2011, fully overhauled by the manufacturer for approx. EUR 250,000: electrical and mechanical components extensively renewed. TECHNICAL DETAILS Tube diameter: 16 – 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 – 200 mm Tube feed length: 1,500 mm Bending angle: max. 180° + spring-back Tube length: 400 – 1,500 mm Tube outside diameter: 28 mm – 60 mm Material specifications Tensile strength stainless steel: max. 750 N/mm² Tensile strength mild steel: max. 450 N/mm² Capacity (steel): Ø 60 x 3 mm Capacity (stainless steel): Ø 57 x 2 mm Axes/Movements Bending direction: left Bending speed (forward): max. 22.0 rpm (infinitely variable) Bending speed (return): constant 22.0 rpm Rotational positioning: max. 360° Rotational speed: 50 rpm Multi-radius height adjustment: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Overrun time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control console (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic oil volume: 340 l Control Bending planes: up to 6 (CNC programmable) Positioning device: NTB configuration Control unit: Schwarze-Robitec operation and control console FEATURES - Automatic cold tube bending machine - Tube positioning device - Gripper - Schwarze-Robitec tube magazine - Hydraulic operation for bending table, tool clamping, sliding rail, mandrel retraction, reinforced sliding rail feed and retraction Bedpfxox Srklj Aa Nowi - Various bending tools for Ø 60 mm tubes - Various accessories - Control cabinet cooling unit - Dual foot switch - Schwarze-Robitec control console - Rittal control cabinet cooling unit, type SK 3361100 Note: Machine could only be tested in setup mode due to lack of operating know-how. No faults are known. The machine is currently disassembled.

Condition: good (used), Year of construction: 2002, received a new control unit in 2019 for €14,000 max. bending diameter: 63.5 mm smallest bending radius: 32 mm Bodpfoykl Rzex Aa Nswi motor: 30 kW

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 500 h, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, pipe length (max.): 3,000 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 180 °, overall weight: 300 kg, power: 1.5 kW (2.04 HP), input voltage: 220 V, input current: 12 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, Metalworking company sell megabender 030 In the equipment have mandrels for tube: 60,3mm x 2mm R120 50mm x 2mm R75 40mm x 2mm R60 32mm x 2mm R100 700 kg Bwodpfx Aasv Di Dno Nsi - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (3000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle Stainless steel 2mm steel 3mm cooper and aluminium up to 4mm