Used Cnc Turn Mill Centre for sale (23,037)

Condition: used, Year of construction: 2022, CNC Machining Center Rated voltage 3/PE AC 220 V Rated current 80 A Rated frequency 50 Hz Ampere interrupt capacity 42 kA Short-circuit current rating 2.5 kA Electronic drawing no. Y200894E Weight 2,600 kg Air supply 0.5 ~ 0.7 MPa Max. spindle speed 24,000 rpm Second plate: power 3P 220 V / 100 A, air 0.5 MPa, date 2022.02.18 Oil Cooling Unit Power source 3~200 V 50 Hz, 1.36 kW / 4.9 A Power source 3~200 V 60 Hz, 1.43 kW / 4.8 A Power source 3~220 V 60 Hz, 1.43 kW / 4.6 A Compressor 0.75 kW Pump 0.4 kW Fan 54 W Refrigerant R410A 0.72 kg Refrigerant pressure (high/low) 4.1 / 0.7 MPa Weight 56 kg Year of manufacture 2021 MFG. No. 1211-210-0020A Tank capacity 35 L Chiller Model number PFCC 150 LHT-S-C Serial number PFCC 150-5165 Year of production 2022.03 Main power source 3Φ 220 V 50/60 Hz Power consumption (max.) 5.5 kW Rated current (max.) 20.1 A at 220 V Cooling capacity 4900/5300 kcal/Hr Refrigerant R-410A Transformer Standard EN61558-2-1:2007, type A.N Gedpfx As Aidqisanobw Phase 3Ø Frequency 50/60 Hz Capacity 35 kVA Connection Y-Y Primary voltage 380 V, 400 V, 415 V, 440 V Secondary voltage 200 V, 220 V Insulation class F Weight 225 kg Date 2022.1 End-User Certificate required - Export from the European Union only after consultation with Samsung.

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm Godpezxhmasfx Aanebw - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Speed of powered tool: 4,000 rpm - Both turrets with internal cooling - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3200 mm Dimensions L x W x H: - Machine: 3400 x 1700 x 1800 mm - Bar feeder: 4000 x 1000 x 1400 mm - Chip conveyor: 3000 x 1100 x 1600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2018, functionality: fully functional, turning length: 530 mm, turning diameter: 255 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, rotational speed (max.): 4,000 rpm, type of input current: three-phase, bar passage: 65 mm, chuck outer diameter: 210 mm, Equipment: documentation/manual, For sale is our well-maintained CNC turning center, a Hyundai WIA L210 LMA, manufactured in 2018, from our production facility. Technical data: Spindle bore: 65 mm Max. turning diameter: 255 mm Max. turning length: 530 mm Turning chuck: Samchully, 210 mm Main spindle speed: 4,000 rpm, 22/18.5 kW Gjdpjz Smd Rsfx Aanebw Control system: Siemens 828D C-axis Tool turret VDI 40, 12 stations, driven tools (5,000 rpm) Coolant pressure: 4.5 bar Tool presetter: Q-Setter Part catcher Preparation for bar feeder magazine Chip conveyor Tailstock MK4 The price includes an extensive tool package: 6 driven tools with internal cooling (3 of which are angled at 90°) 7 holders for turning tools and drill bars 2 sets of soft jaws for the above-mentioned chuck Condition: well-maintained, from ongoing production, technically flawless. Dismantling and loading can be arranged.

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A Godjz Hmxnepfx Aansbw - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.

Condition: used, Year of construction: 2006, Main spindle: Speed 4,000 rpm Power 18.5 kW Bar capacity 65 mm Counter spindle: Speed 4,000 rpm Power 11 kW Bar capacity 65 mm Ejector: Hydraulically actuated with flushing Travel in Z 520 mm Rapid traverse in Z 30 m/min Tool holder I (X/Y/Z): Technology Turret with 10 stations Tool interface VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Y/Z 140/70/450 mm Rapid traverse in X/Y/Z 15/6/30 m/min Tool holder II (X/Z): Turret with 10 stations Tool interface VDI30 Tool drive 4,000 rpm, 4 kW, 16 Nm Travel in X/Z 140/450 mm Rapid traverse in X/Z 15/30 m/min Equipment/Accessories: CNC control TX 8i Chip management Chip conveyor Coolant management Coolant filtration system Mahle with paper band filter Bar loader, FMB Turbo 8-80 - 3m length Finished part removal Hydraulic part gripper with conveyor belt Gedpj Ai A Sxjfx Aanobw Oil mist extraction

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Turning diameter max. 350 mm Turning length max. 1,300 mm Godort Ip Nepfx Aanjbw Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: used, Year of construction: 2008, Technical details: turning diameter: 410 mm turning length: 500 mm control: Fanuc 21i TB standard turning diameter: 275 mm travel -x axis: 277 mm travel -y axis: 82 (±41) mm travel -z axis: 500 mm Spindle 1 RPM: 4500 1/min Spindle 1 Power: 18,5/18,5/15 kW Spindle 1 max. bar diameter: 65 mm turret stations / rotary tool stations: 12/12 Power rotary tools: 5,5 kW RPM of rotary tools: 6000 1/min total power requirement: 39,2 kVA weight of the machine ca.: 6,2 t dimensions of the machine ca.: 3,1 x 2,0 x 2,2 m collet chuck: Hainbuch Accerories Chip conveyor Robot interface Gbedpfxszd Un Is Aanjw High precision Turning and Milling Centre with Y-axis. Machine was running with oil, not coolant. A fire extinguisher system is installed. *

Condition: like new (used), Year of construction: 2025, functionality: fully functional, MAZAK INTEGREX i-250H S U1000 Max. machining diameter: 670 mm Max. machining length: 1,011 mm Max. milling speed: 12,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm!!! The machine is equipped with: - CNC control Mazatrol SmoothAi - Tool magazine for 74 tools (CAPTO) - KITAGAWA 3-jaw chuck for main spindle, diameter 210 mm - KITAGAWA 3-jaw chuck for 2nd spindle, diameter 210 mm - Tool Eye - Y-axis - B-axis 0.0001° (swiveling head) - C-axis (main spindle) input accuracy 0.0001° - Counter spindle with full C-axis - Main spindle with spindle bore 65 mm - Tailstock function for counter spindle!!! Gbeds Ah Dx Ajpfx Aanjw - Interface for bar feeder magazine - 5-axis machining package for SmoothAi - Preparation for MAZAK Monitoring System B - Chip conveyor - KNOLL KSS compact filter system - Approximately 80-85 CAPTO tool holders + 3D probe!!! * As new, with only approximately 350 machining hours!!! * AVAILABLE IMMEDIATELY

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Gbjdpfxez I Nawe Aanjw Tool turret - slots: 12 Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Condition: excellent (used), Year of construction: 2014, CNC turning and milling center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 Internal machine number: 35 X-axis: 695 mm Godsyk Ddgspfx Aanobw Y-axis with travel: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: Capto C6 Total number of tool positions: 80 Accessories: NC tailstock Adjustable hydraulic steady rest AX 5 on NC axis Coolant system with strip filter Hydraulic 3-jaw chuck Kitagawa BB 212-11 Automatic touch probe High-pressure coolant IKZ Software option High Cut Pro (High-precision package with Super Nurbs) CAS collision protection system Spindle orientation, main spindle, electric Multitool including turning function for Y-axis Helix function Automatic main power cut-off DNC-DT interface Machining Navi M-i (milling), speed control for minimizing vibrations. One-Touch IGF Chip conveyor

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis Gbjdoxmirgjpfx Aanjw - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

Condition: good (used), Year of construction: 2009, Ref. -No.: 10026 Manufacturer: SCHIESS Type: VMG4 MA90 Year of construction: 2009 Type of control: CNC-Steuerung Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Turning Diameter: 5000 mm Turning Diameter Over Bed: 4000 mm Spindle Speeds: 0 - 120 RPM Clamping Diameter: 4000 mm Cross Travel: 420 x 340 mm Max workpiece height: 3000 mm Main Drive: 52 kW Max. Tension: 120000 N Max. Payload: 50 t Power Capacity - Table: 110 kW Max torque faceplate: 100 kNm Further information: Automatic tool changer with 80 positions (AAC) Automatic attachment changer for 6 milling heads Live spindle C-axis table Travel of the Y-axis gantry columns Drilling and milling head (master head principle) Straight drilling and milling head GB-1B Renishaw RBP 60 touch probe Hand terminal Gbedpfx Aaozx Nw Tsnow Teleservice Internal and external coolant Operator cabin Chip conveyor SADDLE (X-AXIS): Horizontal movement from the center to the right side 4,800 mm Horizontal movement from the center to the left side 3,100 mm Vertical distance between the saddle rails 1,400 mm Speed / range 0 - 16,000 mm / min GANTRY TRAVEL (Y-AXIS): Gantry stroke 5,000 mm Feed 0 - 16,000 mm / min RAM (Z-AXIS): Maximum cutting force when turning 60 Kn Enter minimum bore 550 mm Guide length 1,600 mm Speed / feed range 0 - 16,000 mm/min Spindle speeds: Range 1 rpm Range 2 0 - 1,100 - 3,150 rpm Spindle torque: Range 1 2,400 - 2,400 - 850 Nm Range 2 450 - 450 - 160 kNm

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Gsdjx A Hl Aepfx Aansbw

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Gbsdpez Ibaiefx Aansw Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Gbodpfx Aaoz R T Exensw Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: excellent (used), With C-axis Godsq Dlt Sopfx Aansbw With driven tools FANUC TXP-200 FA control Turning diameter max 360 mm Turning length -683 mm Swing Diameter -450 mm Spindle speeds -3'000 rpm Top turret tool holders 12 driven positions Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2006, type of input current: three-phase, overall weight: 7,800 kg, We offer a used Doosan PUMA TT1800SY CNC turning and milling center, built in 2006. Machine type: CNC turning and milling center Manufacturer: Doosan Infracore Co., Ltd. Model: PUMA TT1800SY Serial number: PT18SY0099 Power supply voltage: AC 200/220 V Power supply phases: 3 phase Protective earth: PE Power supply frequency: 50/60 Hz Rated capacity: 75.21 kVA Largest load: 11.0 kW Full load current: 197.37 A Interruption capacity: 33000 A Electric drawing edition: PT1H68BB00 Weight: 7800 kgf Year of manufacture: 2006 If you have any questions or need more information, feel free to send us a message or give us a call. Gbodpfx Aj Af N T Uoanew

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Control system: Siemens Travel range X-axis: 300 mm Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Gjdpfoz Ri U Iox Aansbw Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 9,091 h, functionality: fully functional, spindle motor power: 20 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 155 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 400 mm, total height: 1,850 mm, total length: 2,500 mm, total width: 1,910 mm, distance table center to spindle nose: 1,100 mm, overall weight: 4,300 kg, spindle diameter: 65 mm, feed force X-axis: 105 N, feed force Z-axis: 400 N, We are selling our INDEX G200 Compact. The machine is in excellent condition. It will be sold including a bar loader, chip conveyor, and various tools. Gjdps Ah Tn Uofx Aanobw

Condition: excellent (used), functionality: fully functional, fixed tool holders Machine: MORI SEIKI SL2000 Manufacturer’s tool turret: SAUTER ---- 2x → No. 444-119 Turning tool holder 25 mm steel holder Fixed turning tool holder Price: 150.00 €/piece ----- 1x → No. 444-201 Double turning tool holder for main spindle and counter spindle with 1x clamping strip for 25 mm tool steel Fixed turning tool holder Price: 250.00 €/piece ----- 1x → No. 444-210 Drill bar holder Cylindrical mount, ø 32 mm Second mount, ø 32 mm; 57 mm towards the rear Price: 220.00 €/piece ----- 1 x → No. 444-205 Turning tool holder mount 25 mm steel holder Godpfxsynb E No Aanebw Price: 150.00 €/piece Package price: 750.00 €/net, including shipping within Germany International shipping upon request.

Condition: excellent (used), Year of construction: 2006, For Sale: A reliable Yamazaki Mazak Nexus VCN-510C vertical CNC machining center—a high-end production machine from the renowned Japanese manufacturer MAZAK, valued for its precision, durability, and stable operation in industrial manufacturing. The VCN-510C is ideal for machining steel, aluminum, and workpieces that require high accuracy and repeatability. Thanks to the MAZATROL 640M control system, the machine offers intuitive operation and quick production setup. Technical Specifications: Year of manufacture: 2006 Control system: MAZATROL 640M X-axis travel: 1,050 mm Gbodpfx Aaeyha Ivonow Y-axis travel: 510 mm Z-axis travel: 510 mm T-slot table Automatic tool changer (ATC) Central lubrication Control cabinet Weight: 7,100 kg Very low operating hours!!!!!

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 810 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, bar diameter (max.): 65 mm, We offer this used Mori Seiki NZ2000 CNC turning and milling center, manufactured in 2011. Fully automated twin-spindle production cell with FANUC robot, PROMOT Automation, and TOP XF380 bar feeder. Year of manufacture: 2011 For sale is a MORI SEIKI NZ2000 T2 CNC turning machine as a complete, automated production cell with PROMOT Automation, FANUC industrial robot, and TOP Automazioni XF380 bar feeder. This system is particularly notable for its exceptional automation concept, of which there are only two in Europe. The combination of main spindle, counter-spindle, two turrets, bar feeder, and robot automation allows different machining and material flow processes to be automated within a single system. The main spindle is supplied with bar material via the TOP Automazioni XF380 bar feeder. The bar capacity of the machine is 65 mm. Finished parts can be ejected on this side via the existing parts ejector. Simultaneously, the FANUC industrial robot with PROMOT Automation handles the automated workpiece handling on the counter-spindle side. The workpieces are placed on or removed from a rotary table with multiple workpiece holders. This enables highly productive simultaneous machining on the main and counter-spindle. The system thus combines practically two automated machining processes within a single production cell. Equipment / Highlights  MORI SEIKI NZ2000 T2  Year of manufacture 2011  Main and counter-spindle  2 turrets  Simultaneous machining capabilities  Driven tools  TOP Automazioni XF380 bar feeder, year of manufacture 2011  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Automatic material feed via bar material  Parts ejector on the main spindle side  PROMOT Automation robot cell, year of manufacture 2011  FANUC industrial robot  Automatic loading and unloading on the counter-spindle side  Rotary table / workpiece storage with multiple workpiece holders  Integrated safety device and protective enclosure  Fully integrated and coordinated production cell Technical data  Max. turning diameter: approx. 320 mm  Max. turning length: approx. 810 mm  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Spindle bore: approx. 73 mm  Max. spindle speed main and counter-spindle: up to 5,000 rpm  2 tool turrets  Driven tools  C-axis on main and counter-spindle  Design without Y-axis  Simultaneous machining on main and counter-spindle  TOP Automazioni XF380 bar feeder, year of manufacture 03/2011  Bar capacity of the entire system: up to 65 mm round material, limited by the particularity of the system. In contrast to a conventional NZ2000 T2, this is not simply a CNC turning machine with a robot added later. The system was designed as a complete, automated manufacturing cell. Bar machining and robot handling can be combined within the same machine. While one side performs machining of bar material via the main spindle, the counter-spindle side can be automatically loaded and unloaded via the FANUC robot. This concept enables high machine utilization and is particularly suitable for series production and low-manned or automated production operations. Gbsdpfx Asz A S Uysansw If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, functionality: fully functional, CNC lathe Gildemeister Type: CTX 420 V6 Linear Year of manufacture: 2002 Serial number: 02260000631 Control system: Siemens PowerLine Technical data: Working area: Max. swing diameter over X-axis guide 680 mm Swing diameter over X-axis guide 565 mm Chuck diameter 200/250 mm Travel in Z-axis 260 mm Travel in X-axis 635 mm Gbodpfez I T Avox Aanow Spindle head: Spindle head (flat flange) 170 main spindle, 140 counter spindle Spindle diameter in the front bearing 120/90 mm Spindle bore 79/57 mm Main drive: Power of the AC main drive (100% duty cycle) 25 kW Torque max. 270 Speed range 25-5000 rpm Counter spindle Drive power AC 25 kW Torque max. 7000 Nm Speed range 35-7000 rpm Tool carrier Number of tool stations 12 Tool interface according to DIN 69880 Cylindrical shank diameter 40 mm Indexing time 30 ° 0.15 sec. Number of driven tools 5 Drive power 13.2 kW Torque 28 Nm Speed max. 4500 rpm C-axis, main spindle/counter spindle Speed range 0-250 rpm Torque 200/120 Nm Speed during point positioning 0.025 degrees Y-axis, vertical travel +/- 40 mm Hydraulics Capacity, total approx. 25 l Pressure max. 80 bar Pressure for clamping device max 70 bar

Condition: used, Year of construction: 2007, CNC turning machine Gildemeister Type/Model: CTX 520 linear Condition: Used Year of manufacture: 2007 Technical data Max. turning length: 1300 mm Max. swing diameter over bed: 680 mm Max. swing diameter over cross slide: 565 mm Spindle head according to DIN flat flange: Size 220h5 Spindle diameter in front bearing: 150 mm Spindle bore: 107 mm Max. chuck diameter: 315 mm Tooling system: Disc-type revolving tool holder VDI50 Number of turrets: 12 Station for driven tools: 12 Travel in Z-axis: 1350 mm Travel in X-axis: 315 mm Gbedpfx Aoz Ng R Doanjw Tailstock quill diameter/travel: MK 5 / 1200 mm Total connected load: 65 kVA Voltage: 400 V Frequency: 50 Hz Main spindle speed: 4000 rpm Feed rate along Z-axis: 3000 rpm Feed rate of Z-axis slide: 0.025 - 45,000 mm/min Feed rate of X-axis slide: 0.025 - 60,000 mm/min Rapid traverse along Z-axis / X-axis: 45 / 60 m/min Feed force along Z-axis / X-axis: 10,000 N / 5,000 N Space requirement: approx. 43 m² Weight: approx. 10,000 kg Inquiry item: Transportation costs will be provided in a separate quote.

Condition: used, Year of construction: 2022, Machining Center Rated voltage: 3/PE AC 220 V Rated current: 80 A Rated frequency: 50 Hz Ampere interrupt capacity: 42 kA Short-circuit current ratings: 2.5 kA Electronic drawing no.: Y200894E Weight: 2,600 kg Air supply: 0.5 ~ 0.7 MPa Max. spindle speed: 24,000 rpm Power: 3P 220 V / 100 A (second plate) Chiller Gbedps Aidrnofx Aanjw Serial number: PFCC 150-5163 Year of production: 2022.03 Main power source: 3Φ 220 V 50/60 Hz Power consumption: max. 5.5 kW Rated current: max. 20.1 A at 220 V Cooling capacity: 4900/5300 kcal/Hr Tank capacity/weight: 180 liters / 200 kg Refrigerant: R-410A / 1400 g End-User Certificate required - Export from the European Union only after consultation with Samsung.