Used Cnc Turning And Milling Machine for sale (71,527)

Condition: excellent (used), Year of construction: 2018, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: -, turning length: 1,350 mm, turning diameter over cross slide: 715 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 106 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,350 mm, mount diameter: 12 mm, total height: 2,346 mm, total length: 4,088 mm, total width: 2,129 mm, swing diameter over bed slide: 950 mm, overall weight: 10,400 kg, High specification machine with Fanuc 32iTB control. Many options including SMW Autoblok steady rest on programable Servo base, coolant through steady, high pressure coolant, enlarged left hand door to allow 920 mm swing workpiece (950 mm max). Various other options. New cost in 2018 over £200k. Iodpfx Aevz Ab Uoddjht

Condition: used, Year of construction: 2011, Mori Seiki NMV5000 DCG 5-Axis Machining Centre with F31iA5 Control, Spindle Taper BT40, Max Spindle Speed 12,000rpm (22/18.5kW), 61 Position ATC, Hydrajet WP10-1000 High Pressure Through Spindle Coolant. S/No. NM501JK0592 (2011) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iedpfex Syf Rox Addsht

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! Ihjdpsxp Sk Dofx Addot De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: excellent (used), Year of construction: 2018, Nakamura-Tome NTRX-300 High Rigidity Multitasking Machine with NT Smart X Control, Halter Parts Loader & Fanuc Robot NT Smart X (Fanuc31i-Guide i). Maximum Turning Ø640mm. Maximum Turning Length 1,100mm. Distance Between Spindles Min/Max 250-1,350mm. Main Spindle- Buck BBC 210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Sub Spindle- Kitagawa B-210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Axis Travel 'X'=700mm, 'Z'=1,125mm, 'Y'= ± 125mm, 'B2'=1,100mm. Driven Tool (Milling) Maximum Spindle Speed 12,000rpm (22/15kW Motor). Swivel Range 225° (-120°/+105°). Spindle Taper Capto C6. 80 Position ATC. Maximum Tool Ø90/Ø120mm (Non-Adjacent Tool). Maximum Tool Length 300mm. Maximum Tool Weight 12kg. S/No. RX300709 (2018). Halter Load Assistant U-20 Parts Loader with HALTER Smart Touchscreen Control- 72 Workpiece Positions. Workpiece Diameter (Min-Max) Ø10-230mm. Minimum Workpiece (L x W) 10 x 10mm. Maximum Workpiece (L x W) 230 x 230mm. Maximum Height of Workpiece 250mm. Maximum Load Capacity Robot Arm 20kg. With Sick S30A-4011CA Safety Laser Scanner. S/No. DCH0203 (2019). Fanuc Robot M-20iA Type A05B-1225-B252- 6 Axis, Payload 20kg, Reach Approx 1,811mm. S/No. R18704467 (2018). Ihodpfox Iv Nqsx Addet With Renishaw Tool Setting Arm, Renishaw Tool Breakage Detection, Renishaw Spindle Inspection Probe, Coolant System With 8 Bar Through Spindle Coolant, Parts Loading/Unloading Conveyor With Schunk Spindle Parts Gripper, Tri-Mist 1000 Mist Extraction Unit, Daikin Inverter Oil Chiller, LNS Turbo MH500 Chip Conveyor, Parts Catcher, Foot Switches, Signal Tower, Handwheel & Built in Control Manuals. Overall Dimensions L4,460 x D2,670 x H2,615mm. Weight 18,000kg. Note: Tooling Not Included.

Condition: excellent (used), Year of construction: 2019, Nakamura-Tome NTRX-300 High Rigidity Multitasking Machine with Halter Parts Loader, Fanuc Robot & Hydrafeed Barfeeder Ihjdpfx Aex Iv H Nsddjt With NT Smart X (Fanuc 31i-Guide i) Control. Maximum Turning Ø640mm. Maximum Turning Length 1,100mm. Distance Between Spindles Min/Max 250-1,350mm. Main Spindle- Buck BBC 210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Sub Spindle- Kitagawa B-210 3 Jaw Power Chuck. Maximum Spindle Speed 3,500rpm (22/18.5kW Motor). Spindle Nose A2-8. Bar Capacity Ø80mm. Axis Travel 'X'=700mm, 'Z'=1,125mm, 'Y'= ± 125mm, 'B2'=1,100mm. Driven Tool (Milling) Maximum Spindle Speed 12,000rpm (22/15kW Motor). Swivel Range 225° (-120°/+105°). Spindle Taper Capto C6. 40 Position ATC. Maximum Tool Ø90/Ø120mm (Non-Adjacent Tool). Maximum Tool Length 300mm. Maximum Tool Weight 12kg. S/No. RX300808 (2018). Halter Load Assistant S-230-20 Parts Loader with HALTER Smart Touchscreen Control- 12 Position Stacker. Workpiece Diameter (Min-Max) Ø43-230mm. Maximum Height of Workpiece 175mm. Maximum Load Capacity of Robot Arm 20kg. Maximum Total Weight on Rotating Table 1,250kg. Maximum Stacking Height 350mm. Number of Stacking Stations (1 Empty) 12. Maximum Weight Per Station 115kg. With Sick S30A-4011CA Safety Laser Scanner. S/No. DCH0300 (2019). Fanuc Robot M-20iA Type A05B-1225-B252- 6 Axis, Payload 20kg, Reach Approx 1,811mm. S/No. R18Y00642. Hydrafeed Multifeed Barfeeder Length 2,100mm. S/No. 6849. With Renishaw Tool Setting Arm, Renishaw Spindle Inspection Probe, Coolant System With 8 Bar Through Spindle Coolant, Parts Loading/Unloading Conveyor With Schunk Spindle Parts Gripper, Daikin Inverter Oil Chiller, LNS Turbo MH500 Chip Conveyor, Parts Catcher, Foot Switches, Signal Tower, Handwheel & Built in Control Manuals. Overall Dimensions L4,460 x D2,670 x H2,615mm. Weight 17,000kg. Note: Tooling Not Included.

Condition: used, Year of construction: 2013, Mori Seiki NTX2000/1500SZM 5-Axis Mill/Turn with F31iB5 Control, Main Spindle Kitagawa 10”dia Chuck at 4,000rpm, Sub-Spindle Kitagawa 10”dia Chuck, 76 Position ATC, 10 Station Indexing Turret, Spindle Taper Capto C6, SMW SLU 3.2 Hydraulic Steady, High Pressure Coolant, Swarf Conveyor. S/No. NTX20130611 (2013) Ihodpfx Ajx R Uc Ujddst Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Iodpfx Adsx Tucmsdoht Movement x-Axis 9000 mm. y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2005, Daewoo Puma TT 2000SY Twin Turret Turning Centre with Fanuc 18i-TB CNC Control With Hydrafeed Multifeed MX-1B Short Magazine Automatic Bar Feed. Swing Over Bed 800mm. Swing Over Saddle 620mm. Max Turning on Upper Turret Ø390mm. Max Turning on Lower Turret Ø300mm. Max Working Length 350mm. Max Bar Ø65mm. 'X1' Axis Travel 255mm, 'X2' Axis Travel 190mm. 'Z1' Axis Travel 800mm, 'Z2' Axis Travel 900mm. 'Y' Axis Travel 120mm (+ or - 60mm). 'B' Axis 810mm. 'C' Axis 360°. (1) Kitagawa BB08 Power Chuck Ø210. (1) CRS66 Power Collet Chuck, Gripping Range 4mm-66mm. Main Spindle Nose A2 No.6 with Ø76mm Through Hole & Ø66mm Bore of Draw Tube & Max Speed of 5,000RPM. Twin Turret each with (12) Tool Stations. Tool Size 25mm x 25mm, Boring Bar Size Ø40mm & Spindle Speeds 4,000RPM. LNS Turbo 62878680E Swarf Conveyor (2005). Puma S/No. PT 20SY0047. Hydrafeed Multifeed MX-1B Automatic Bar Feed. Approx Ø3 - Ø80mm x 1,250mm Long Bar Range with Hydrafeed Controller, S/No. 202618. Ihjdpfxsx H Thbj Addjt Includes Probe Arm, Signal Tower, (2) Machine Lights & (2) KF-101P Foot Switches. Dimensions of Turning Centre Approx 4,100mm x 2,300mm x 2,600mm High, Weight Approx 11,600kg. Please note: Filtermist FX 4000 XCEL 2 Oil Mist Filter Extraction is not included with the machine.

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm Iedsyaqgyopfx Addjht - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm Ihjdpfeyaqczjx Addet - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: used, Year of construction: 2001, turning diameter / mm turning length / mm control / total power requirement / kW weight of the machine ca. / t required space / m Ihjdpfx Adox Tu Suodst

Condition: good (used), Year of construction: 2001, M01.43870 frequency 50 Hz voltage 400 V 24 V connected load 48 kW Iedpfx Adjrc Ip Ssdoht rated current 63 A control Siemens 840 D turning diameter 250 mm turning length 100 mm weight of the machine ca. 7,5 t turning length external / innen 100 mm workpiece length - min. 29 mm workpiece length - max. 100 mm

Condition: used, Year of construction: 2005, revolutions per minute 8000 U/min x-travel 1000 mm y-travel 500 mm z-travel 570 mm Control Siemens weight of the machine ca. 5000 KG Ijdpfsud Al Hjx Addjht

Condition: excellent (used), Year of construction: 2020, Swing over bed 880mm, Ihedpfx Adex I N Rbjdst Swing over saddle 817 mm, Maximum turning diameter 550mm, maximum turning length 3070mm, bar capacity 116.5mm, Y axis +/- 75mm, Spindle speed 2000rpm, milling speed 4,000rpm, spindle power 37/30KW, 12 station turret, Fanuc IPlus control. 3 jaw chuck, tool setter, Hydraulic steady, swarf conveyor,

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 40898, SPECIFICATION Table size 1270 x 320mm Longitudinal traverse (X axis) 750mm Cross traverse (Y axis) 400mm Vertical traverse (Z axis) 500mm Maximum table load 500Kg Quill travel 127mm Quill feeds 0.04, 0.08, 015mm/rev Quill diameter 100mm Quill taper ISO40 Spindle motor 5.6kW Spindle speeds (inf. variable) 50 – 3800rpm Spindle nose to table 100 – 600mm Spindle centre line to column 500mm Head tilt left or right 0 – 90 degrees Approximate weight 2500Kg Machine in Metric execution   MACHINE EQUIPPED WITH Heidenhain TNC 320 CNC Control Ihjdpfsx S Nfgjx Addot Air power drawbar Power rise and fall to knee Interlocked table guard Base splash tray Coolant system Automatic Lubrication system Lighting Vice

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp Iodpfx Adox Uxdqjdeht * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: used, Year of construction: 2008, bar capacity 65 mm number of spindle speeds 5.000 U/min control Siemens 840 D no. of tools in turret 1 12 no. of tools in turret 2 12 no. of tools in turret 3 12 Stk./pcs. tool taper VDI 30 driven tools turning speeds 4.000 U/min Iodexbtqispfx Addoht travel -x1 axis 165 mm travel -z1 axis 220 mm travel -x2 axis 165 mm travel -z2 axis 150 mm travel -x3 axis 165 mm travel -z3 axis 650 mm travel -y3 axis 80 (+50/-30) mm CNC Turning- and Milling Center | DMG - Sprint 65 linear equipped with main/counter spindle, a 3x turret for driven tools, bar feeder and chip conveyor as well as internal counter-spindle flushing with coolant. The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint65Gildemeister | Sprint-65 | Sprint65

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mazak lathe Model Integrex 200Y Ihjdpfxex Tpz Rj Addjt Year 2001 CNC Mazatrol PC-FUSION Including tooling and documentation

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Iodpsyab Egofx Addjht Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Y-axis with 100mm travel Gantry loading system LG-10AI

Condition: good (used), Year of construction: 2013, CNC MATRIX 2 , Maximum diameter 658 mm, travel X 615 mm, travel Z 1585 mm, travel Y 250 mm, bar passage 102 mm bore 112, spindle speed 35 to 2200 rpm, milling spindle 35 to 12000 rpm, 5 simultaneous axes, mm, 36 tool magazine Capto C6, RENISHAW preparation, steady rest support, chip conveyor. Ijdeuqkttopfx Addeht

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot Ihjdpfx Ajyaadzjddet CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: used, Year of construction: 1990, total height: 2,300 mm, total width: 1,800 mm, total length: 2,800 mm, Empty weight: 3.500 kg - Year: 1990 - Documentation available: Yes - CE certificate present: No - Serial number: 16090455 - Drive system: CNC - Horizontal/vertical: Horizontal - Control system brand: Heidenhain - Power [kW]: 16.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 435 - Z-axis travel [mm]: 210 - Table length [mm]: 1570 - Table width [mm]: 500 Ijdpfx Adsx Dicmodjht - Main spindle power [kW]: 3.8 - Options: External cooling - Tools included: Yes - Transport dimensions: 2800mm x 1800mm x 2300mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2004, functionality: fully functional, Control system: Mazatrol 640 MT Pro Ijdexy Nzuspfx Addjht Travel distances: X-axis = 630 mm Y-axis = ±230 mm Z-axis = 1,585 mm B-axis = 225° X2-axis = 230 mm Z2-axis = 1,530 mm Rapid traverse speed of the axes: X-axis = 38 m/min Y-axis = 26 m/min Z-axis = 38 m/min C-axis (spindle rotation): 400 rpm MAIN SPINDLE Drive power: 30 kW Max. torque: 1,200 Nm Speed range: 35 to 3,300 rpm COUNTER SPINDLE Drive power: 26 kW Max. torque: 500 Nm Speed range: 35 to 4,000 rpm MILLING SPINDLE Drive power: 18.5 kW Max. torque: 120 Nm Speed range: 15 to 12,000 rpm Max. turning diameter: 760 mm Max. turning length: 1,500 mm Tool magazine: 80 stations (Capto C6) Coolant/chip removal: - Oil mist extraction - Hinged belt chip conveyor - High-pressure package 70 bar - 7 pressure levels PLC - Dual change filter and oil skimmer Linear scale system for X/Y-axis MACHINE OPTIONS - Synchronous counter-rotation of turning and milling spindle - C-axis 0.0001 degree (counter spindle) - Overload monitoring system for the spindle and axis feed system - Automatic ON/OFF with warm-up function WORKPIECE HANDLING SYSTEM: - Gantry loader GL 200 F (1,500 U) - Hand type D3 (clamp jaws types A, B, C, D, E) - Maximum workpiece weight 2 x 20 kg - Shuttle loop type II (belt conveyor) - 12 pallets 750 x 440 mm - Safety fence - Automatic chuck open/close - Air blast device at the chuck CONTROL OPTIONS - Cylindrical interpolation - Interface set - Option package for 5-axis simultaneous machining - Synchronous tapping, MAZACC2D, - EIA/ISO, tool length compensation - Fully programmable B-axis 0.0001° - Software for 5-axis simultaneous mode - For main and sub spindle 3-jaw quick-change power chuck Ø 315 mm Type: SMW KNCSN315 91 The machine can be inspected under power at any time.

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine Ihjdpfx Aev Sfkaoddjt tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system Iedpsxmhdnjfx Addoht - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.