CNC turning and milling center

Takisawa FX-600

Condition: ready for operation (used), Year of construction: 2013, This Okuma MCR-A5C30x65 gantry milling machine was manufactured in 2013. It features a robust 100 mm spindle, capable of speeds up to 4000 min⁻¹, and accommodates a maximum workpiece size of 2540 mm by 5540 mm. The machine supports a hefty 30,000 kg on its 2500 × 6300 mm table. Ideal for heavy-duty milling with a rapid feed rate of 20,000 mm/min. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Dimensions of machine (lxwxh): 2500 mm x 6600 mm x 6350 mm / weight (kg): 59000 kg • Max workpiece width: 2540 mm / max workpiece length: 5540 mm • Table size (width × length): 2500 mm × 6300 mm /max load on table: 30000 kg table height from floor: 850 mm /effective width between columns: 3050 mm/ t-slot (width × number): 24h7 × 13 • Cutting feed rate: 1 to 10000 mm/min/ rapid feed rate: 20000 mm/min/ table movement x-axis: 6500 mm /x-axis travel: 6500 mm /y-axis travel: 3500 mm/ z-axis travel: 650 mm • Tool holder: bt50 + masz type/ tool storage capacity: 50 tools /max tool length: 300 mm • Power supply: 400v, 3 /phases, 50hz rated capacity: 513 kva /full load current: 741 a /peak current: 117/138 a /short circuit current: 18 ka Gbodpfox D S Eksx Aayst • Spindle diameter: 100 mm /spindle speed: 30 to 4000 min⁻¹ • Large table size suitable for heavy loads. /extensive tool storage capacity. /high rapid feed rate for efficient operations.

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Gedpfx Aajht Rl Ejyobt Length: 100-1200 mm

Condition: excellent (used), Year of construction: 2013, swing over cross-slide 360mm, Maximum cutting diameter 366mm, Maximum cutting length 705mm, Bar capacity 80mm, Spindle speed 4,000rpm, milling speed 10,000rpm, Main spindle power 18.5Kw, Gedpfsx Eitusx Aayobt C axis 0.001 degrees, Y axis -/+ 50mm, 12 station turret. Mori Control M730BM, equipped with Toolsetter, swarf conveyor, 3 jaw chuck, Parts catcher, barfeed unit

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Gbjdju Ng Dtjpfx Aayjt Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: excellent (used), Year of construction: 2007, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 15,800 kg, operating hours of spindle: 13,500 h, coolant supply: 40 bar, We offer in good condition Deckel Maho DMU100P Duoblock from 2007 with only 13.500 spindle hours. Heidenhain iTNC530 control X-Axis travel: 1000 mm Y-Axis travel: 1000 mm Z-Axis travel: 1000 mm Internal coolant 40 bar SK40 12.000 RPM Spindle Table Ø1100 x 900 Machine will be in stock in the next 2 weeks. Gbedpezlyd Defx Aayot

Condition: like new (used), Year of construction: 2022, MAZAK QUICK TURN 250MY SmoothG Max. turning diameter: 380 mm Max. turning length: 504 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - CNC control: Mazatrol SmoothG - KITAGAWA 3-jaw chuck, BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Chip conveyor - 8 pcs. fixed tool holders - 2 pcs. powered tool holders Gbsdjzk I Tqopfx Aayet The machine has only 900 hours of pure machining time!!!

Condition: excellent (used), Year of construction: 2013, operating hours: 5,785 h, Okuma Genos L300e-MY turning center Year: 2013 Technical details: Control OSP P300L-R Turning diameter 340 mm Turning length 1020 mm Spindle bore diameter 65 mm Spindle Speed 25 - 3000 1/min Gjdpfx Aaozat Tvoyobt Spindle motor 15/11 kW Movement X-axis 235 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1074 mm Minimum indexing C-Axis main Spindle 0,001 ° Number of tools on turret 12 Spindle speed driven tools 45 - 4500 1/min Number of driven tools 12 position Tool Taper VDI40 Spindle motor driven tools 7/3,3 kW Bar feeder SPACESAVER 2210 ( 1500 mm bar lenght, up to 67 mm diameter ) Machine dimensions 4370x2540x2490 mm Weight 7500 kg Accessories/options: - SPACESAVER 2210 barfeeder - swarf conveyor - parts cather - Renishaw tool measuring arm - Driven tool holders - Static tool holders - Hydraulic chuck - Jaws for chuck - Documentations - Dust extractor

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] Gsdpsyn R I Hofx Aayebt EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Gbsdpfx Ajyn Em Reayot Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP Gsdpfx Ajxp Na Neayebt PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL GOOD SLIDES