Used Cnc Woodworking Machine for sale (68,626)

Condition: used, Year of construction: 2021, operating hours: 8,350 h, machine/vehicle number: 323618, 4 axes, travel paths (x/y/z): 560/640/640 mm, weight: 10,200 kg, power: 71.7 kVA, 40-position tool changer, 2-position pallet changer, internal coolant supply, SK-40 tool holder, chip conveyor, !!!Pick-up: 21st+26th May 2026!!! Iiedpfeyztd Sjx Am Eoa

Condition: used, Year of construction: 2024, CNC plasma cutting machine Isdpfxsytqmms Am Esia Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter unit for outdoor installation 1 x nesting software on the machine control Availability: immediately

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Iedpfx Amsykruas Eoia Manufacturer: Messer Model: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld seam preparation (bevels) 1 x Skew Rotator with Kjellberg FineFocus 800 power source 3 x ALFA oxy-fuel torches 1 x FineMarker marking unit Without table, filter, and rail track ID 16426

Condition: used, Year of construction: 2006, CNC Portal Plasma Cutting Machine Manufacturer: Messer Ijdpfx Amsykpd Es Ejia Model: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Working area: 3 x 12 m Track width: 4,000 mm Travel length: 15 m Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filtration system ä16426

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Donaldson DFPRO 6 Cyclopeel filtration system Cutting software: Omniwin Standard Availability: immediately Ref.: ä16426 Isdpfjyhd Rbex Am Esia

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm Iisdeyay H Aopfx Am Esa 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x drilling spindle 26 kW up to 40 mm diameter, including 8-position tool changer 1 x preparation for retrofitting a rotator (for bevel cuts) 1 x nesting program on the CNC control Ref. no.: ä16426 Availability: May 2026

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Iiedpfx Ajxnmbnem Eoa Filter unit TEKA Ref. ä16426

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control system Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 autogenous torches for propane Oscillating conveyor table by Beuting Donaldson DFPRO12 filter unit for outdoor installation Iisdpfx Amou U Hm As Eoa

Condition: good (used), Year of construction: 2008, CNC Gantry Plasma Cutting Machine Iiodpfxjiff Daj Am Eoa Manufacturer: Messer Model: Multitherm 4000 CNC Control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Exhaust table: 2,000 x 3,000 mm 1 oxy-fuel torch ALFA 1 plasma torch Power source: Kjellberg HiFocus 280i Filter unit: Z-Line 9 ZDC Our own technicians available for installation, commissioning, and training! All spare parts in stock

Condition: used, Year of construction: 2012, CNC Laser Cutting System Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC Control: iMSNC Windows Laser hours approx.: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Ijdox Eh Drspfx Am Eeia Max. sheet thickness steel: 15 mm Max. sheet thickness stainless steel: 8 mm Max. sheet thickness aluminium: 8 mm Operating temperature: +10 to +30 °C and max. 90% relative humidity (at 20°C) Extraction duct (left & right): outlet left, ø 250 mm Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter unit: TEKA 4H 5.5 kW Overall dimensions: approx. 10,400 x 3,610 mm

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Worktable: 1.5 x 6 m 2 oxy-fuel torches Iiedpsw El Udsfx Am Esa 16426ä

Condition: good (used), Year of construction: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of Manufacture: 2011 CNC Control: iMSNC with integrated network card Working Area: 2,000 x 9,000 mm Exhaust table 1 Oxy-fuel torch Cutting thickness up to 150 mm 1 Plasma marking unit Kjellberg Laser pointer Technical details: Iisdpfxjudn Rzo Am Eea 1x Oxy-fuel torch (fully automatic) 1x Plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network interface LCD operator panels on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system "AsperWin-Basic" for direct programming at the machine control Macro library module "AsperWin Select" NC simulator module "AsperWin NC-Sim" "Plasma marking" module (for scribing) via plasma source "THC" / Automatic height control via arc voltage USB2.0 connectivity for storage media Remote diagnostics module MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Power cables Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 set capacitive height control IHT / for oxy-fuel 1 set electric ignition unit RHÖNA-Acetylene Double-sided cable safety (collision protection) for gantry bridge via emergency stop Kjellberg® Plasma marker unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into CNC control Module for automatic control of marking device

Year of construction: 1998, condition: used, ID No.: F40205, T-slot clamping table: approx. 4,200 x 960 mm; HEIDENHAIN control; chip conveyor KNOLL 200 S-1/50, year of manufacture: 1997, serial no.: 33897; belt filter KNOLL VRF 150, year of manufacture: 1998; hydraulic unit; control cabinet; cooling system BKW DL32V/4519-1KKSRZP, total machine length: approx. 10 linear meters. Iedpsyzthqefx Am Esia

Year of construction: 1999, condition: good (used), machine/vehicle number: 490880699, ELB CNC controlled profile grinding machine type Perfect Future BD10 Unicon 4 axes Iijdsiwa S Tjpfx Am Eoa Used, well maintained 4-axis CNC profile and surface grinding machine Siemens control Grinding length 1000mm Grinding width 600mm Grinding height 600mm Slijpsteenafmeting 400x100x127mm 4th axis Universal paper belt filter system with permanent magnetic pre-filter Cooling water unit Various grinding stones

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Ijdoy Auxmepfx Am Esia Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma with Kjellberg HiFocus 161i power source Prepared for retrofitting of an oxy-fuel torch Filtration unit Kemper System 8000 with pre-separator Nesting software Asper Basic on the CNC control ä16426

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. If you have any questions or need more information, feel free to send us a message or give us a call. Iijdpox Ik Dcsfx Am Eoa

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range Iiedpfx Amey Dcive Eja - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared Isdped I R E Nsfx Am Ejia - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1999, total height: 3,000 mm, total length: 6,400 mm, total width: 4,300 mm, No. 3269 CNC machining center HOMAG BAZ 41/30K Used, year of construction 1999 Working dimensions: X 3000 mm / Y 1300 mm / Z 250 mm Gluing unit Drilling and milling unit with 4 spindles Flush milling unit Sanding unit Interchangeable air jet Adjustable milling and drilling unit Under-table milling unit Tool changer 12-station turret changer Control system WoodWOP 5.0 Installation dimensions with safety barrier approx. 6400 x 4300 x 3000 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Iedpfxey Dtp He Am Esia Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, Year of construction: 2014, operating hours: 29,759 h, machine/vehicle number: 62141109, 24-position tool changer, travel distances X/Y/Z: 2,000/1,300/1,850 mm, spindle speed: 4,000 rpm, with magnetic clamping plate approx. 2,000x800 mm, chip conveyor, cooling unit, 1 HEIDENHAIN TT 460 reference probe, tool holder: SK50, footprint: 700x550 cm, without machining tools. The operating materials are included in the auction and must be taken by the buyer or properly disposed of. Iiodoyztgmopfx Am Eoa

Year of construction: 2018, condition: used, machine/vehicle number: 0602011, Power: 56 kW, magnetic clamping plate approx. 3,000x1,000 mm, control terminal, band filter system, magnetic separator, external cooling, REVEN extraction system, footprint: 13,000x350 cm, weight: 27,500 kg. Operating fluids are included in the auction and must be collected by the buyer or professionally disposed of. Iiedpfeyztg Hjx Am Eoa

Condition: used, Year of construction: 2005, operating hours: 41,059 h, machine/vehicle number: 12831, with 30 tool changers, spindle speed: 5,000 rpm, travel paths: X/Y/Z: 2,500/1,000/770 mm, control: HEIDENHAIN iTNC530, 1 chip conveyor, 1 coolant/lubricant filtration system, operator display, magnetic clamping plate approx. 2,000x800 mm, 2-piece, weight: 21,000 kg, without machining tools, according to information: inverter for Z-axis out of order. Operating fluids are included in the auction lot and must be taken by the buyer or disposed of properly. Iijdpfx Amjyztgte Eea

Condition: used, Year of construction: 2005, operating hours: 50,472 h, machine/vehicle number: 12332, Magnetic clamping plate approx. 1,200x600 mm, spindle speed: 8,000 rpm, travel paths X/Y/Z: 2 mm, control: HEIDENHAIN iTNC530, chip conveyor, operator terminal, coolant/lubricant belt filtration system, weight: 10,500 kg, without the hydraulic vise shown, without machining tools. Operating materials are included in the auction scope and must be taken or properly disposed of by the buyer. Ijdpfx Ajyztgyjm Esia

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Isdpfeyzpm Nsx Am Esia

Condition: like new (used), Year of construction: 2012, operating hours: 33,525 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 1,250 m/min, rapid traverse Y-axis: 620 m/min, rapid traverse Z-axis: 620 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain iTCN530, workpiece weight (max.): 1,000 kg, rotational speed (min.): 15,000 rpm, overall weight: 8,000 kg, spindle speed (min.): 15,000 rpm, CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Iedpfxjyybpmj Am Ejia Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000