Used Cnc Woodworking Machine for sale (68,580)

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Fpode Ahkyaopfx Aansp Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Type: S20 Turbo Year of construction: 2004 Type of control: CNC-Steuerung Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Fsdpj Ahkxysfx Aanepp Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2014, CNC machining center Manufacturer: Homag Type: BMG 512 Year of manufacture: 2014 Technical data - Working area X: 7575 mm - Working area Y: 1900 mm - Working area Z: 300 mm Fpedpfx Aao Aiqrfensp - Independent Z-axes: 2 - Number of milling spindles: 2 - Liquid-cooled milling spindle - Main motor: 18.5 kW in S6 operation, 14.5 kW in S1 operation - Maximum speed: 24,000 rpm - 5-axis spindle - Tool clamping system: HSK-F63 - Tool changing stations: 39 - Pick-up changing station - Tool changer: 2 x 10-position and 1 x 18-position - Number of consoles: 12 - 1 vacuum pump 300 m3/h - Control system: powerControl PC85, Homag power Touch - Software: Homag WoodWop 6.1 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) Fpjdpfey N Du Dsx Aanep - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun Fjdpfs Ahhdpjx Aanjpp x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Fedpfxez Ebzhs Aanjpp Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC Horizontal Machining Center Deckel Maho DMC60H Year: 2001 Approx. 55,000 operating hours The machine has been regularly maintained, is fully functional, and is currently ready for demonstration while powered on. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Fpedpfo Ah H Txex Aansp Control system: Siemens Sinumerik 840D Spindle speed: 15,000 rpm Tool interface: HSK-A63 Rapid traverse rate X/Y/Z: 60.00 m/min Tool magazine: 90 tools EQUIPMENT Number of axes: 4 Pallet changer (RS4) with 6 positions Coolant system with internal coolant supply at 40 bar Chain magazine: 90 tool positions Chip conveyor Tool laser measurement system BLUM Electronic handwheel MACHINE DETAILS Total power requirement: 65.00 kW Drive power 40% duty cycle: 20.00 kW Drive power 100% duty cycle: 13.00 kW Machine weight: approx. 16.00 t Space requirement: approx. 9.00 x 4.50 x 3.50 m

Condition: used, Offered is a CNC portal machining center with multiple clamping. Equipped with a large clamping table, several workholding fixtures, numerous hose connections and protective curtains on the machining portal. Inspection possible by arrangement. Fodpfxj Agwqaj Aanopp

Condition: good (used), Year of construction: 2006, operating hours: 21,565 h, functionality: fully functional, machine/vehicle number: 107.37.00.165, total height: 2,700 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 7,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,697 h, spindle motor power: 10 W, number of spindles: 1, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Offered here is a CNC vertical 5-axis machining center from the manufacturer Mikron, featuring a workpiece pallet pool with 7 pallets. The machine is in very good condition and can be inspected and tested at any time. Manufacturer: Mikron GF Type: UCP 600 Vario Year of construction: 2006 Control system: Heidenhain iTNC 530 Technical data: Travel ranges X-Y-Z: 600x450x450 mm Max. rapid traverse: 22 m/min Max. feed force X and Y axis: 5 kN Max. feed force Z axis: 7 kN Rotary table C-axis: 360° Swivel range A-axis: -115° to +30° Table surface: 450x450 mm Max. table load: 200 kg Magazine positions: 30, fixed coded positions Tool holder: ISO-B40 Max. tool length: 250 mm without taper Max. tool weight: 6 kg Tool diameter: 90 mm fully loaded / 130 mm partially loaded Spindle speed: 12,000 rpm Power: 15 kW at 44% duty cycle, 10 kW at 100% duty cycle Machine dimensions: 3300x2400x2700 mm (excluding pallet pool) Fpsdpfx Aae Aivkaenjp Weight: 7,700 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Spindle oil cooler 1x Pallet pool with 7 work pallets 1x Renishaw measuring probe OMP60

Condition: used, Offered is a CNC knee-type milling machine, model FU 400 × 1600. Clamping surface: milling table with T-slots. CNC control: VEB Numerik CNC-H 646. Equipped with a machine vise, flexible coolant hose and swiveling CNC control panel. Inspection possible by arrangement. Fpodpj Afpkwjfx Aanjp

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Fpedpszw Tw Uefx Aanop Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 2001, machine/vehicle number: .01720, with CNC control, manufactured by FIDIA, type: C20, travel ranges: X-axis: 2400 mm, Y-axis: 2850 mm, Z-axis: 1000 mm, with automatic tool changer with 20 tool stations, with T-slot clamping plate, size: approx. 2000 x 1800 mm, coolant system. Fpsdpfx Ae Af Nlmeanep

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Fpjdpfx Aj Ain Iwoanop Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: used, Mikron UM 710/900 Universal Milling Machine High-precision universal tool milling machine from the Swiss quality manufacturer MIKRON, model UM 710/900. Fedpfx Aezcqcgjanjpp The machine comes from a well-maintained environment and impresses with the renowned Mikron precision and the generous working area (up to 900 mm travel in X). It is ideally suited for toolmaking, prototype construction, training, or demanding repair workshops. Technical data at a glance (manufacturer's specifications): Working area & axes: Longitudinal travel (X-axis): 710 / 900 mm Transverse travel (Y-axis): 630 mm Vertical travel (Z-axis): 500 mm Spindle: Tool holder: SK 40 / DIN 69871 Gear stages: 4 Speed range: adjustable (vertical & horizontal) Main drive & feed: Spindle drive power: 11 kW (at 44% duty cycle) / 7.5 kW (at 100% duty cycle) Feed rate (X, Y): 0 – 10,000 mm/min (programmable) Feed rate (Z): 0 – 8,000 mm/min (programmable) Rapid traverse (X, Y / Z): 10 m/min / 8 m/min Clamping table (rotary table): Clamping surface: 600 x 1,200 mm T-slots: 9 pieces (14-H7, spacing 63 mm) Max. table load: 500 kg Electrical system, dimensions & weights: Connected power: Total installed rated power 21.5 kW Operating voltage: 3 x 400 V - 50 Hz Coolant system: 150-liter capacity Machine weight: approx. 4,300 kg (including safety enclosure) Product video "Everything from a single source: We would be happy to offer you a suitable bank financing solution for your project." You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Heid S-200 CNC lathe - Manufacturer: Heid - Type: S 200 - Machine type: CNC lathe - Tailstock travel: 175 mm - Tailstock quill mount: - Morse taper: 4 MK - Quill stroke: 140 mm - Quill diameter: 95 mm - Thrust force: 17 kN - Connection 50 Hz 3-phase: 380 volts - Total power requirement: 65 kVA - Spindle speeds: - Continuously variable from 0 rpm to: 4000 rpm - Spindle bore: 77 mm Fedpfxex Elw Ej Aanjpp - Tool shank cross-section: 25x25 mm - Turning diameter over the bed: 420 mm - Maximum turning diameter: 250 mm - Turret: - Longitudinal travel (Z-axis): 1150 mm - Cross travel (X-axis): 230 mm More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2007, Make: DMG Type of machine: Nef 600 Year of manufacture: 2007 Control system: Fanuc 210 is Machine's weight: 5,5 t Tool holder: VDI 40 x-travel: 320 mm z-travel: 1250 mm Speed range: 3000 U/min Cutting diameter: 600 mm Turning length: 1250 mm Overall dimensions: 4000 x 2200 x 2000 mm Tool turret - slots: 8 Pl. Fpsdoxnpbqspfx Aanep Spindle opening: 90 mm

Condition: used, DOEBELI PETEWE FSM TFc is a CNC tool and cutter grinder delivering high precision, excellent accuracy and reliable performance. Working capacities: 4 axes; table 500×290 mm; X 120 mm, Y 50 mm; resolution 0.0001 mm; max. grinding diameter 200 mm; max. grinding wheel Ø250 mm, bore 46 mm; grinding head ±30°; spindle nose HSK 40. Technical specs: grinding spindle stepless from 1500 to 6000 t/min; spindle motor 2.5 kW; voltage 50 Hz 3x 400 V; weight ≈2500 kg; overall dims 1800×1700×1900 mm. Accessories: coolant system 80 l, redressing device, profile projector, cold light, central lubrication. Engineered for tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Fodpfx Aae Ai Sdaonepp

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC-Steuerung Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Fsds Ahkwispfx Aanopp Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain HR410 handwheel - 3D scanner, infrared - The ball screw on axes Z and Y runs clamped and supported on combined radial/axial roller bearings and radial ball bearings with 250 N/sqm stiffness. The machine can be viewed while powered up.

Year of construction: 2001, condition: used, Control: AGIEVISION. Disconnected since 05.11.2026, operational until then, fully functional. Inspection possible by appointment. Fpjdpfx Aae Ai Tznenop

Condition: excellent (used), Year of construction: 2021, operating hours: 1,700 h, functionality: fully functional, machine/vehicle number: 21-0153, travel distance X-axis: 6,150 mm, spindle speed (max.): 2,300 rpm, spindle speed (min.): 140 rpm, total length: 3,350 mm, total height: 2,800 mm, table width: 570 mm, total width: 10,000 mm, table length: 6,510 mm, drilling capacity: 40 mm, table height: 45 mm, rotational speed (max.): 2,300 rpm, rotational speed (min.): 140 rpm, Equipment: documentation/manual, rotational speed infinitely variable, We would be happy to provide you with a video of the machine in operation upon request. We offer this used BAUER BOHRMAX Z60 drilling and milling machine, manufactured in 2021, for sale. Includes: Manual vise SPM 3 (total of 8 pieces) Fpjdpfo Ai Dh Hex Aanop Manufacturer: Bauer Maschinenbau GmbH Type: BOHRMAX Z60 Year of manufacture: 2021 Serial number: 21-0153 Connection value: 11 kW The BAUER BOHRMAX Z 60 machine is in excellent condition and is equipped with all accessories. -Travel on the X-axis (longitudinal): 6,150 mm. -Stepless speed adjustment from 140 to 2,300 1/min Drilling capacity in structural steel: 3 to 40 mm -Tool holder SK 40 -Pneumatic tool clamping -Coolant system in the machine stand for the drilling tool -Table thickness: 45 mm -Access protection on the operator side by means of a light barrier -Chip tray -Automatic tool length measurement. -Handheld control unit -Running tool changer: -Swiveling angle drilling head: -Minimum quantity lubrication in addition to the standard coolant system. -3D probe SK 40: for measuring the workpiece zero point in X, Y, and Z -Chip conveyor Z 60: Length: 6,000 mm -Software extension for DXF data import -Virtual machines: Definition of up to eight virtual workspaces with their own zero points. -Software for drilling angled holes -License for one office workstation If you have any questions or require further information, please feel free to send us a message or call us. The machine can be picked up from March 1st, 2027.

Condition: used, Year of construction: 2007, CNC machining center Manufacturer: SCM Type: Morbidelli Author X5 EVO 440 Year of manufacture: 2007 Fjdpfx Aaoz Iv Nrjnepp Technical data - Working area: 1350 x 4400 mm - Equipped with a milling spindle, drilling unit, and saw - Horizontal machining units - Original SCM software - The machine is in good working order. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2027, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 400 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 26,000 rpm, number of slots in tool magazine: 30, CNC machines from HG GRIMME SysTech Perfect for: Highly efficient 3D milling for small workpieces – precise milling with high part output Materials: Plastics, composite materials such as CFRP / GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transportation & logistics, leisure industry, sanitary, boat building, automation Fedpfx Ae Adqr Teanopp Availability: March 2027 Model: 5-axis CNC milling machine RT-F 1400 Spindle data: 8 kW / 6.4 Nm; 1000-36000 1/min; HSK E 40 Rapid traverse X/Y/Z: 80/80/60 Part dimensions X/Y/Z: 1000 x 800 x 400 Control system: Fanuc with IPC, handheld terminal HMOP Type B Tool changer: 12 tools Tables: 1 rotary table Vacuum system: yes Tool breakage and length monitoring: Renishaw-TS 27 R Other: Chip tray, perforated metal grid, sheet metal for extraction on the rear Year of manufacture: 2026 Condition: new

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Fedpj Ain N Refx Aanjpp Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Fpjdpfxjzvhkyj Aanep

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Fpodpfx Ae Ain Nioansp Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.