Used Colomn Drill for sale (4,872)

Condition: excellent (used), Year of construction: 1998, power: 3 kW (4.08 HP), rotational speed (max.): 4,500 rpm, total width: 1,100 mm, total length: 2,600 mm, total height: 2,200 mm, table width: 800 mm, table length: 1,150 mm, overall weight: 1,800 kg, Radial arm drill KOVOSVIT MAS - VO 32 MACH-ID 9476 Make: KOVOSVIT MAS Type: VO 32 Year: 1998 Arm Length: 1000mm Max. drill Ø cast: 40mm Max. tap Ø: 24M Max. drill Ø steel:32mm Stroke pinole: 250mm Speeds / ranges: 4500Rpm Spindle Taper: 4ISO/Bt/Mk Column sleeve: 300mm Quill Ø: 60mm Table Length: 1150mm Table Width: 800mm Power: 3kW Length: 2600mm Width: 1100mm Height: 2200mm Weight: 1800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Psdpfx Adjyyxn Hslopr

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 452 year of construction 1996 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm distance spindle nose to table 185 - 685 mm table size 490 x 400 mm Spindle speed 50 - 500 rpm. Stepless Drill slide feed rate 20 - 224 mm/min. Stepless Drill slide rapid traverse 4.5 m/min. Motor power feed 0.18 kW Motor power rapid traverse 0.75 kW Motor power drilling spindle 1.1 kW (speed 1000 rpm) Mains connection 400 volt, 50 Hz - Spindle speed infinitely variable via frequency converter - Drill slide feed infinitely variable via frequency converter - 2 operating modes set-up and automatic mode - central lubrication - control cabinet at the back of the machine - swivelling control panel - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 1000 kg. good condition Ppodeikrtqepfx Adler

Condition: used, High performance drilling machine ALZMETALL type Abomat 20 Production drilling machine make no. 449 year of construction 1995 drilling capacity in steel ST 60 25 mm drilling capacity in cast iron GG 20 30 mm spindle mounting SK 40 - M16 throat 280 mm drilling slide stroke 500 mm spindle distance max. 685 spindle distance min. 185 table size 490 x 400 mm spindle speed 2000 rpm Pedpfxjgd Ipko Adlepr autom. feed 224 mm/min. rapid traverse 4,5 m/min. motor power feed 0,18 kW motor power rapid traverse 0,75 kW motor power drilling spindle 1,5 kW Mains connection 400 Volt, 50 Hz - Prduction drilling machine with spindle speed and feed rate - actual spindle speed 2000 rpm. - actual feed speed 224 mm/min. - 2 operating modes manual and automatic - electric drill head height adjustment - central lubrication - control cabinet at the rear side of the machine - mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment space requirement L x W x H 1200 x 700 x 2530 mm weight approx. 900 kg good condition

Condition: ready for operation (used), functionality: fully functional, spindle mount: MK 4, drilling depth: 240 mm, total width: 480 mm, total length: 550 mm, drilling capacity: 45 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, spindle stroke: 240 mm, SPECIFICATIONS Brand: Erlo Ppjdpfxex Dcfhe Adler Model: TCA-45 Capacity: 45 mm ø Table length: 550 mm Table width: 480 mm Spindle taper: MK4 Speed: 68 - 1,270 RPM Arm reach: 360 mm Stroke: 240 mm Table height adjustable manually Automatic feed Gear-driven Machine dimensions: 1,000 x 700 x 2,400 mm

Condition: ready for operation (used), A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible. Psdpfey H I Ezex Adljpr

Condition: new, functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, type of input current: DC, spindle mount: MK 2, total width: 500 mm, total length: 300 mm, total height: 1,050 mm, table width: 290 mm, table length: 290 mm, overall weight: 47 kg, drilling capacity: 16 mm, column diameter: 72 mm, drill chuck size: 16 mm, spindle speed (max.): 2,840 rpm, spindle speed (min.): 220 rpm, stroke length: 85 mm, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Foot ----- 420 x 250 mm Column diameter ----- 72 mm Overall height ----- 980 mm Weight ----- 47 kg Ppedpfx Adek Iuzielor Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 896 mm Boring depth max. 65 mm Motor output 2x1,5 kW Ppedjy Ehz Hopfx Adler Overall size 1122x1040x1250 mm Weight 380 kg Number of boring spindles 29 St.

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 704 mm Boring depth max. 70 mm Motor output 1,5 kW Ppodpfxsy Ehzgj Adljr Weight 310 kg Number of boring spindles 23 St.

Condition: new, Year of construction: 2026, Pitch 32 mm Working width 1088 mm Boring depth max. 85 mm Motor output 2x1,5 kW Overall size 1320x1040x1250 mm Ppedpjy Ehyvefx Adlsr

Condition: used, Year of construction: 2006, Radial drilling machine Manufacturer: Valmer Model: TR 80/2500 SP Year of manufacture: 2006 Table dimensions: 1,000 x 800 x 560 mm Max. drilling diameter: 80 mm Max. tapping diameter: 42 mm Max. distance spindle axis/column: 2,500 mm Min. distance spindle axis/column: 500 mm Ppedpfxow Dbgys Adlor Horizontal head travel: 2,000 mm Max. distance spindle nose to working surface: 2,000 mm Min. distance spindle nose to working surface: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

Condition: good (used), Year of construction: 2018, Burning-Drilling Machine Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC Control Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic turret Tool holder: 14 Motor power: 16 kW Drilling diameter: 5 - 40 mm V-Scoring marking: 5 to 40 mm Sheet dimensions min.: 1,500 x 300 mm (750 x 400 mm with restriction) Minimum finished part dimensions: 80 x 80 mm Max. sheet weight: 2,600 kg and 650 kg/m Ppsdpfxevzrczo Adler Infeed side: Roller conveyor for flat steel and plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of trolleys: 2 clamps NC feed carriage, side positioned 4 clamping tongs (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowering discharge table and chute into material collection bin for unloading small parts. Filter unit including piping High-performance for use with carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and V-scoring/marking LANTEK license Ref. no.: ä16426 Availability: immediately!

Condition: used, 1 pc. GENKO bench drill incomplete Colour: as shown, according to the images and inspection Condition: used Ppjdpfxjy D I Tye Adlsr Item storage location: warehouse hall Payment method: advance payment by bank transfer Shipping: pick-up only from site Ditzingen-Heimerdingen

Condition: good (used), bore capacity in steel (diameter) 32 mm throat 310 mm bore stroke 175 mm spindle taper MT MK3 table-size 570 x 475 mm spindle turning speed - stepless 60 - 1600 U/min voltage 400 V column diameter Ø145 mm quill feed 0,1-0,16-0,25 mm/U total power requirement 1,1/1,8 kW weight of the machine ca. 450 kg dimensions of the machine ca. 0,70 x 1,10 x 2,10 m Ppsdpjy Aytiofx Adler - Serial-No.: 121950 - Stepless speed control - Automatic vertical feed - Built-in machine light

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2020, operating hours: 5,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Hydraulic flushing pump. Prepared for displacement pump installation. Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Hydraulic breakout clamp. Pedex Uyukepfx Adlopr Drill rod storage cassette. Pipe handling manipulator. Automatic lubrication system.

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW Ppedpfxjxablxe Adlsr weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: used, Year of construction: 1980, functionality: fully functional, functions perfectly Psdpfx Adox Eigzeljpr The machine weighs approximately 4 tons.

Condition: ready for operation (used), Year of construction: 1984, total width: 1,600 mm, overall weight: 5,500 kg, arm 1600 mm; drilling capacity 55 mm; hydraulic clamping; stroke 6000 mm; weight 5500 kg. Pedpfx Adoy Dqy Nslopr

Condition: good (used), functionality: fully functional, Radial drilling machine BWF BR40 * 15 speeds * min. speed: 22.4 rpm * max. speed: 2800 rpm T slot table: * Length: 1600mm Ppodpfeviu Nmjx Adlor * Width: 800mm Machine dimensions: * Length: 2500mm * Height: 2800mm * Width: 1000mm

Condition: like new (used), functionality: fully functional, 5 pcs drill rod adapters SANDVIK Pjdpfx Aoyr Iqgsdlepr Model: T51 HL1000PE D52 L840 Part no.: 7306-6019-02 Total length: 840 mm Suitable for drilling rigs with long extractor (52 mm bearing diameter)

Condition: good (used), Drilling capacity 13 mm Spindle mount B 16 6 spindle speeds 410 - 3400 rpm Drilling depth 60 mm - Drill head height adjustable - Motor pole reversible Ppedpfewnfarox Adler Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle mount MT 5 Throat 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Ppodpfx Astwzk Djdlor Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Feed • Right-to-left travel • Motorized up and down travel • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Normal drilling capacity 20 mm Continuous drilling capacity in St 60-2 / E 335 18 mm Spindle holder MK 2 10 spindle speeds 240 - 3800 rpm. Drilling depth 100 mm Projection 215 mm distance spindle/table up to 360 mm distance spindle/base plate 560 mm table surface 350 x 290 mm Column diameter 75 mm Motor pole-changing 0.6/1.2 kW Total height 1050 mm Weight 100 kg Today's new price: 4.022,00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel Ppedpfxefzbkhs Adlsr

Condition: good (used), Window handle drilling machine Pedpfx Aey Edmljdljpr

Condition: used, functionality: fully functional, spindle mount: MK 2, quill stroke: 120 mm, Gillardon column drilling machine, drill press in decent used condition Manufacturer: Maschinenfabrik Wilhelm Gillardon II Bretten i. Baden According to the information on the attached plate, the drilling machine is operated with a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor type KPER 80 K 4 VEM Motors Thurm GmbH D Zwickau 3 speed ranges via belt drive. Quill travel approx. 120 mm, drilling spindle with Morse taper 2. Weight approx. 150 kg / Approx. 1380 RPM MK2 drill column Podjh N Svlopfx Adlspr Power consumption 0.75 kW - Mains connection 380 Volt, 50 Hz. Price €390,-- net ex location, plus packaging costs All technical details subject to errors and omissions. Sale exclusively to countries within the EU.

Condition: good (used), Year of construction: 2017, functionality: fully functional, CMS Brembana Vertec – Vertical CNC Glass Milling & Drilling Machine Available from Week 17 We offer a well-maintained CMS Brembana Vertec milling and drilling machine, designed for high-precision vertical processing of glass. This machine is ideal for companies operating in architectural, interior, or technical glass sectors, requiring milling, drilling, and edge processing in a single setup. Key Features - Vertical CNC machining centre for glass - Processing direction: left to right - Suitable for milling, drilling, countersinking, and edge processing - Compact footprint with high productivity - Front and rear tool magazines (9 positions each) - Automatic tool changer - Integrated lubrication and cooling system - CNC control system with user-friendly interface - Robust industrial build quality (CMS Italy) Working Range - Max glass length: 3200 mm - Max glass height: 2200 mm - Min glass length: 420 mm - Min glass height: 180 mm Ppjdpfxoyzf Rdo Adlsr Technical Information - Manufacturer: CMS (C.M.S. S.p.A., Italy) - Model: Brembana Vertec Mill - Voltage: 400V / 50-60Hz - Phases: 3 + N - Full load current: 31A - Short-circuit rating: 10kA - Machine type: Vertical glass processing centre Condition - Machine is in good working condition - Regularly maintained - Can be inspected under power by appointment Included - Tool holders and selected tooling (as shown) - Spare parts cabinet (optional / negotiable) - Documentation (if available) Availability - Available from Week 17 - Location: Netherlands Additional Information This machine provides a reliable solution for workshops seeking to improve efficiency in glass processing with a vertical setup. Suitable for both small series and serial production. We also have videos of the machine in operation. Please inquire for further information.