Used Compound Miter Saw for sale (6,092)

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard Iisdpfofk Ew Eex Afheg • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Year of construction: 2017, The SD 500 industrial double-head saw with a hydropneumatic feed system for the cutting discs is a machine model with cutting discs that extend from below. As standard, the left head is fixed. The right head is mobile and is moved using a highly precise servo drive. The cutting length readout is completely independent of the drive for the mobile head. The machine is equipped with fixed stops for angles of 45º and 90º. Intermediate angles can also be achieved. Both heads are equipped with main vertical and horizontal clamping devices. The discs, set at an angle of 45º inwards, eliminate the need for corrections. Because the cutting discs extend from bottom to top and the main vertical clamping devices act on the profile at the point of its highest stiffness, the profile does not bend in the housing groove. This ensures that both the angles and planes are maintained, with the additional support of the horizontal clamping device. The machine's operation is controlled via an independent control panel equipped with a DELL PC. Standard equipment: independent control panel with a PC cutting length readout independent of the head drives (from a magnetic strip) electronic positioning of the mobile head automatic machine zeroing cutting of 2 to 4 profiles simultaneously discs extending from below in a / \ arrangement, eliminating the need for corrections hydropneumatic feed system for the cutting discs triple vertical and horizontal pneumatic clamping pneumatic adjustment of the disc extension angle (90°-45°) spacer between the heads, applied manually 4 outlets for industrial extraction, Ø100mm cooling system Iisdsznuk Ropfx Afhjg cutting length: min 300mm, max 3300mm roller guide at the mobile head, 3000mm

Condition: new, Year of construction: 2026, Optimum Optisaw SD 500 Double miter metal bandsaw with swiveling saw blade Art. No. 3292380 Length approx. 2122 mm Width/Depth approx. 1046 mm Height approx. 1497 mm Iijdpfx Asgd Si Esfhjg Weight approx. 522 kg Electrical data Motor power, coolant pump 100 W Total connected load 3.8 kW Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 35 / 70 m/min Saw blade length 3770 mm Saw blade width 34 mm Saw blade thickness 1.1 mm Cutting angle 45 – -60 ° Feed Hydraulic via lowering cylinder Raising the saw blade manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular, vertical (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangular, vertical (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangular, vertical (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangular, vertical (solid material) 180 x 220 mm Heavy-duty industrial design Low-noise operation High cutting accuracy due to vibration-free operation Miter adjustment from -45° to 60° by swiveling the entire saw blade Supplied as standard with high-quality bi-metal saw blade Microswitch for automatic end shut-off Coolant pump Ball-bearing saw blade guide with carbide inserts for optimal cutting results Easy adjustment of the lowering speed by means of a flow control valve in the control panel Large, quick-release vice, laterally adjustable Clear control panel Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Bernardo Double-Column Bandsaw MBS 600 DG / 400 V Technical Specifications Cutting capacity, round / square, 90°: 410 mm / 300 x 300 mm Cutting capacity, flat, 90°: 540 x 300 mm Cutting capacity, round / square, 45° (right): 400 mm / 260 x 260 mm Cutting capacity, flat, 45° (right): 400 x 210 mm Cutting capacity, round / square, 45° (left): 340 mm / 260 x 260 mm Cutting capacity, flat, 45° (left): 380 x 170 mm Cutting capacity, round / square, 60° (right): 260 mm / 175 x 175 mm Working height: 866 mm Bandsaw blade dimensions: 4290 x 34 x 1.1 mm Cutting speeds: 45 / 90 m/min Coolant pump: 100 W Motor output power S1 100%: 2.2 kW Motor input power S6 40%: 3.0 kW Voltage: 400 V Machine dimensions (L x W x H): 2340 x 1430 x 1460 mm Weight: approx. 606 kg Scope of supply • Bandsaw blade • Workpiece stop • Base frame • Manometer for blade tension • Bandsaw blade guide with carbide inserts • Quick-release vise • Coolant system • Hydraulic lowering cylinder • Motor protection switch Iiedjzibc Aopfx Afhog • Automatic end-of-cut shut-off

Condition: new, Year of construction: 2024, machine/vehicle number: 2024/121/47, functionality: fully functional, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Ijdpfxotwz Tle Afhoig incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23022001, tilt adjustment saw blade: 45 °, workpiece width (max.): 80 mm, workpiece height (max.): 70 mm, main saw diameter: 350 mm, production capacity: 1,900 unit/h, This machine is an automatic double miter saw! TECHNICAL DETAILS Process stations: up to 6 Cutting angle: 45° Suitable materials: wood, MDF, strips, profiles, and aluminum, depending on the saw blade Cutting performance / production output Production output: 1,500 to 1,900 cuts/hour Cutting type: simultaneous double miter cut Workpiece dimensions Workpiece width max.: max. 80 mm Workpiece height max.: 70 mm Iodpfxozdktto Afhoig Saw unit Saw blades: 2 x diameter 350 mm Cutting positions: 2 Saw blade position: 45° Feed / material feed Feed stroke max.: 1,200 mm Feed stroke optional max.: 1,600 mm Feed length max.: 3,200 to 6,200 mm Vertical feed length: 3,000, 4,000, 5,000, or 6,000 mm MACHINE DETAILS Motor power: 2 x 1.5 kW System: industrial pneumatic system Clamping system: vertical and horizontal pneumatic clamping Software version: 6.0.7.0 Operation: touchscreen, mouse, or external keyboard Programming methods: frame method and list method Production data: production reporting Extraction nozzle: 2 x diameter 80 mm Extraction: prepared for dust and chip extraction Control: PLC / control modules Control cabinet: industrial control cabinet with relays, transformer, circuit breakers, and cable ducts Cooling: forced ventilation Layout / installation dimensions / weight Installation length Layout 1: 6,282 mm Installation depth Layout 1: 1,100 mm Installation length Layout 2: 8,250 mm Installation depth Layout 2: 4,000 mm Installation length Layout 3: 13,952 mm Installation depth Layout 3: 9,000 mm Partial dimension Layout 2: 2,560 mm Partial dimension Layout 2: 2,490 mm Partial dimension Layout 2: 3,200 mm Machine weight: 550 kg EQUIPMENT Automatic double miter cut Vertical or horizontal material feed Primary material gripper system Optional advanced material gripper system Speed-feed servo system Vertical and horizontal clamping device Unloading belt with ejector Kick-out conveyor Pneumatic transfer conveyor Touchscreen control Password-protected software platform Manual control of all machine commands Programming via frame or list method Simulation and visualization of cutting programs Cutting and material optimization Production data acquisition Operating panel with screen and indicators PLC / control modules Industrial relays Mean-Well power supply Transformer Circuit breaker Wiring in cable ducts Forced ventilation Industrial pneumatic actuators Tested connections and hoses Emergency stop Safety devices Prepared for dust and chip extraction

Condition: new, PILOUS ARG 300 plus H.F. double-miter band saw with automatic hydraulic lifting of the saw frame Incl. special accessories: Powered chip brush, band tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm, +45°240mm, +60°155mm Square: 90°290mm, -45°195mm, +45°225mm, +60°150mm Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor: 400 V, 50 Hz, 2.2 kW Pump motor: 400 V, 50 Hz, 0.05 kW Iedpoh S Ikkofx Afheig Motor of the hydraulic unit: 400 V, 50 Hz, 0.18 kW Saw blade speed: 15–90 m/min, stepless Saw band length: 3150 x 27 x 0.9 mm Working height from the clamping device: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm Machine dimensions (max.) 1700 x 2000 x 2150 mm Machine weight: 645 kg

Condition: new, Year of construction: 2026, Cut-off and miter saw, type: ZS 200 N - 5 KW motor with machine stand, Machine operated via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade arbor bore 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm The saw can be tilted to an acute angle of up to approx. 25 degrees on one side and can be tilted to the left up to 30 degrees. Tungsten carbide circular saw blade 520x4.0/2.8 x 50 mm, 60 teeth, negative bevel, for wood RLH-ST60, 6.0 m measuring length, mounting side: Left Length stop / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital measuring display, stop slide pneumatically releases, stop flap folds back, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connecting piece: overall length: 6.7 m Additional cost for digital electronic display unit type: FIAMA EP6 for 230 volt mains operation, with electronic on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60, 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Iodpfxek H Ic Uj Afhsig diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connecting piece Location: In stock, 54634 Bitburg - immediately available - Image: similar. Machine is still in original packaging.

Condition: new, PILOUS Dual-mitering bandsaw ARG 235 plus Includes special accessories: Powered chip brush, belt tension indicator Cutting range: Round: 90° - 45° + 45° + 60° in mm: 235-165-185-115 Square: 90° - 45° + 45° + 60° in mm: 230-145-160-80 Rectangle: 90° - 45° + 45° + 60° in mm: 280 x 180 - 185 x 80 - 185 x 100 - 115 x 80 Main motor: 400 V, 50 Hz, 1.4 kW Pump motor: 400 V, 50 Hz, 0.05 kW Saw blade speed: 40/80 m/min. Saw band length: 2710 x 27 x 0.9 mm Working height from the clamping jaw: 900 mm Iiedpfxsilqh Ej Afheg Coolant tank: approx. 15 l Machine dimensions (min.): 1640 x 750 x 1400 mm Machine dimensions (max.): 1930 x 1610 x 2000 mm Machine weight: 295 kg

Condition: new, PILOUS Dual-miter bandsaw ARG 260 plus E Includes special accessories: Powered chip brush, band tension indicator Cutting range: Round: 90° -45° +45° +60° in mm: 260-180-200-125 Square: 90°-45°+45° +60° in mm: 240-160-185-105 Rectangle: 90°-45°+45° +60° in mm: 300 x 185-190 x 105-185 x 295-125 x 105 Ijdpfx Asilqd Nofhjig Main motor: 400 V, 50 Hz, 1.4 kW Pump motor: 400 V, 50 Hz, 0.05 kW Saw blade speed: 35/70 m/min. Saw band length: 2880 x 27 x 0.9 mm Working height from the vise: 900 mm Coolant tank: approx. 15 l Machine dimensions (min.): 1690 x 750 x 1430 mm Machine dimensions (max.): 1980 x 1510 x 2040 mm Machine weight: 310 kg

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm cutting area at 90°: 115 mm Ijdpfocu Dvuox Afhjig cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Iiedpfx Aoyinu Hjfhog Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available - Iiodpei Dfidjfx Afhsg

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Iijdpfx Aeyw Tzisfheg

Condition: used, OMGA Radial 700 radial saw Ijdpezxxn Ijfx Afhoig Cutting width at 90° max 700mm Cutting height max 110mm Cutting unit adjustable at an angle in two planes Saw spindle speed 3000 rpm Main motor power 2.61 kW Pneumatic feed of the cutting unit Machine dimensions 120x233x154cm (H) Machine weight 330kg

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, controller model: E555 Touchscreen, overall weight: 2,300 kg, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Max. cutting length: 6000 mm Iijdpfx Afey Egahoheg Saw blade diameter: 550 mm Saw blade speed: 2800 rpm MACHINE DETAILS Control: E555 touchscreen Compressed air supply: 7 bar Dimensions & Weight Dimensions (L x W x H): 7500 x 1500 x 2000 mm Weight: 2,300 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min Iodpfx Afewqpmnshoig - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation Ijdpovyidmjfx Afhsig • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: excellent (used), Miter circular saw make KALTENBACH type TL 250 for aluminum and plastic profiles Saw blade diameter 250 mm Iiedpfx Afemrq Evshsg

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Iiedpfx Afewprmzshsg Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 402 Alttan Çıkma Kesim Makinası, functionality: fully functional, • Compliant with CE standards. Iedpfxerahzgo Afheig • Used for cutting aluminum and PVC profiles. • Hydro-pneumatic cutting operation. • Adjustable cutting speed according to the profile. • Capable of cutting at fixed angles to the right and left: -60, -45, -30, -22.5, -15, 0, +15, +22.5, +30, +45, +60 degrees. • Pneumatic vertical and horizontal clamps. • Ø550 mm diamond-tipped aluminum saw blade. • Equipped with roller conveyor (3 meters right and left). • Oil spraying system. • Enables precision cutting thanks to the 3 kW motor and Hydro-check. • For use with a digital measuring meter.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade bore: 40 mm, Equipment: documentation/manual, scrap and mitre circular saws Iijdpsypwhpsfx Afheg Model: ZS 170N Motor: 400 V / 2.0 kW Speed: 3500 rpm Cutting length: 410 mm (at 90°) Cutting height: 170 mm (at 90°) Mitre range horizontal: 45°-90°-25° Mitre range vertical: 90°-45° (left) Saw blade diameter: 420 mm Extraction nozzle: 100 mm Weight: 120 kg

Condition: new, Equipment: CE marking, saw blade guard, Mitre saw with a saw blade diameter from 400mm to 800mm - Manual mitre adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and tilt angle of the clamping cylinders are infinitely adjustable) - Two-hand safety control Iijdpoyxlqrjfx Afhog Version as an automatic saw available on request. Optional available: - Automatic mitre adjustment - Hydraulic saw feed - Hydraulic clamping device - Roller conveyor with length stop or positioning system - Version as automatic saw - Preloading magazine - Horizontal clamping device - Extraction system - Additional accessories on request We are happy to prepare a quotation tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Iisdpfx Afjxvh E Reheg Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps • Air gun OPTIONS • Barcode printer Iiodpforamvaox Afhjg • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement