Used Compounding for sale (184)

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22012101118, spindle bore: 21 mm, center height: 100 mm, turning diameter: 200 mm, type of input current: AC, turning diameter over bed slide: 110 mm, input voltage: 230 V, spindle speed (max.): 2,500 rpm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 150 rpm, spindle speed (min.): 150 rpm, tailstock quill mount: MK 2, spindle mount: MK 3, total width: 425 mm, total length: 830 mm, total height: 360 mm, tailstock quill stroke: 65 mm, Equipment: rotational speed infinitely variable, Working Ranges Center Height: 100mm Center Distance: 300mm Swing Diameter over Cross Slide: 110mm Bed Width: 100mm Speed Range Speed Control: electronically adjustable Number of Speed Ranges: 2 Speed Range: 150 – 2500 rpm Electrical Data Drive Motor Power: 0.6kW Connection Voltage: 230V Mains Frequency: 50Hz Chjdpfx Afjw Imhvsljf Standards and Approvals Standard: DIN EN 55011 EMC Class: C1 Spindle Spindle Bore: 21mm Tool Holder Maximum Mounting Height: 12mm Chuck Passage Diameter: 20mm Spindle Taper: MT 3 Tailstock Tailstock Taper: MT 2 Tailstock Quill Travel: 65mm Leadscrews Metric Pitch: 0.25 – 3mm/rev Number of Metric Pitches: 14 Inch Pitch: 44 – 8 TPI Number of Inch Pitches: 12 Travel Cross Slide Travel: 55mm Compound Slide Travel: 75mm Carriage Travel: 300mm Feed Longitudinal Feed Range: 0.1 – 0.2mm/rev Number of Longitudinal Feeds: 2

Condition: used, machine/vehicle number: 33548, turning diameter over bed:533 mm turning diameter over slide rest:340 mm turning length:2000 mm centre height:270 mm turning diameter in the gap:720 mm spindle bore:80 mm :12 turning speed range:25 - 1500 U/min Codjcxxucjpfx Aflehf feeds::76 travel of compound slide-rest:110 mm spindle travel:360 mm taper MK:4 bed width:370 mm weight of the machine ca.:2,87 t dimensions of the machine ca.:4,1 x 0,95 m

Condition: excellent (used), mileage: 31,000 km, axle configuration: 4x4, gearing type: automatic, Year of construction: 2000, 2 identical vehicles available! Csdetixlmopfx Aflehf Scania 124C 420 4x4 water tender 4x4 drive ATW pump, 3200 l / min at 8 bar High pressure 300 l/min at 40 bar Foam proportioning Hale Foam, CAFS compressed air foam system Water tank: 3400 liters Foam compound class A: 200 liters Foam concentrate class B: 300 liters Cable winch 54 kN Light mast with 4x 1000W Power generator 32kVA Vehicle length: 8100 mm Vehicle width: 2750 mm Vehicle height: 3350 mm Wheelbase: 3900 mm

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, For sale, used but in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm Chsdpfx Afovy T Ivolof 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: good (used), Joke lapping machine EL 600 - with accessories - with lapping compound pump & pressure device Good condition, fully functional, can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power before purchase. Kindly ask any questions prior to purchasing to prevent any ambiguities. For general inquiries or to schedule an inspection appointment, I am available at the phone number provided above or below at any time. Subject to errors in description and prior sale. VAT is itemized separately on my invoices. Chsdjwv Ha Nspfx Aflsf Shipping via freight forwarder.

Year of construction: 2022, operating hours: 0 h, condition: new, Mobile cleaning centrifuge including buffer storage for dirty water, agitator and double membrane compressed air pump. - new machine - Cjdpfjf Sqfqex Aflshf numerous other variants and special designs on request Machine type: Process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: vibratory finishing technology, general solid-liquid separation, cooling lubricant processing, wet blasting systems, ... Benefits: - High discharge through acceleration forces acting in the system of over 1800 times the acceleration of gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory grinding process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70 ° C (optional cooling available) - frequency-controlled motor drive for smooth acceleration and braking of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the field of vibratory grinding, drying and process water technology, which are precisely tailored to your application. From development to production: We deliver all of our products from a single source and everything is "Made in Germany". ----- Please just contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: used, functionality: fully functional, turning diameter: 930 mm, turning diameter over bed slide: 650 mm, turning length: 6,000 mm, total width: 8,500 mm, For sale is a used lathe from the Polish manufacturer POREBA, model TPK-90A1/6M. The machine is in very good condition, under power and can be inspected at any time. Equipment as shown in the photos. Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 Chsdpev Epkkefx Aflef - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg

Condition: as good as new (ex-display), functionality: fully functional, rotational speed (max.): 180 rpm, filling weight (max.): 75,000 g, grinding spindle motor power: 4,000 W, TECHNICAL DETAILS Motor power: 4 kW Machine capacity: 120 l Load: max. 75 kg per load Speed range: 50 to 180 rpm Recommended setting: 115 to 135 rpm Container details Working bowl diameter: 640 mm Working bowl lining: PU, 26 mm, yellow Workpiece capacity per load: 55 l MACHINE DETAILS Dimensions (L × W × H): 1,700 × 1,300 × 2,200 mm Weight: 700 kg Electrical and water connections Power connection: 3 × 400 V Fuse protection: 16 A CEE Water connection: G ¾ ISO 228-1 Chjdpfx Aswa Ul Uoflof EQUIPMENT - Touchscreen with manual operation - Continuous speed adjustment via frequency converter - Stainless steel discharge box - Manually adjustable ball valve for compound addition - Color finish in RAL 7015/7035

Condition: new, Year of construction: 2025, CORMAK 500 x 1000 (CJ6250Cx1000) Universal Lathe The CORMAK 500 x 1000 is a robust and precise conventional metal lathe designed for professional machining in industrial plants, tool rooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single-item and batch production. Key Advantages of the Machine Induction-hardened bed, resistant to torsion and vibrations – guarantees machining accuracy. Removable bridge section allows for machining parts up to 630 mm in diameter. Modern spindle bearing system with ball bearings ensures stable operation at high speeds. Precise speed and feed control – full control over process parameters. Rapid longitudinal and cross feeds – for faster operations. Digital readout for 3 axes – simplifies dimensional control and shortens setup time. Chsdpfxsxd Upxj Aflsf Wide threading capabilities – metric, imperial, modular, and D.P. threads. Main motor 5.5 kW – high power for demanding material machining. Standard Equipment 3-axis digital readout 3-jaw self-centering chuck, Ø 250 mm Fixed steady rest Travelling steady rest Spindle reduction sleeve Foot-operated emergency brake Full-length chip guard Coolant system 24V halogen work light Threading dial indicator Tool kit CE Declaration of Conformity User manual Brand-new machine with warranty Technical Specifications Parameter Value Swing over bed 500 mm Swing over cross slide 325 mm Swing in gap 630 mm Turning length in gap 260 mm Maximum turning length 1000 mm Bed type Induction-hardened Bed width 330 mm Chuck diameter 250 mm Spindle bore 80 mm Spindle nose D1-8 CAMLOCK Spindle speed range 24–1600 rpm Max tool size 25 x 25 mm Longitudinal feed range 0.072–4.038 mm/rev Cross feed range 0.036–2.019 mm/rev Cross slide travel 305 mm Compound slide travel 130 mm Metric threads 1–192 mm Inch threads 0.5–28 TPI Module threads 1–56 mm D.P. threads 8–56 D.P. Tailstock quill diameter 65 mm Tailstock quill travel 120 mm Tailstock taper MT 5 Digital readout 3-axis Main motor power 5.5 kW Coolant pump power 0.1 kW Machine weight 1700 kg

Year of construction: 2006, operating hours: 82,068 h, condition: good (used), functionality: fully functional, machine/vehicle number: 258-22, Moving column machine in steel-concrete composite construction with workpiece changing device. Low-maintenance model from the world-renowned manufacturer CHIRON. Double spindle - vertical - machining center incl. chip conveyor KNOLL AE 1058.009 and a compound unit (already dismantled). Prescribed maintenance intervals for plant and plant parts have always been observed. TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x 6 36 mm (with insert drill) Guides: with long term grease lubrication speed range: 20-12.000 rpm CNC control: SIEMENS 840D spindle distance in X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plane) rapid traverse speed 60 m/min in X-, Y- and Z-axis Main spindle drive: 1 piece with 2 AC motors power at 100 % ED: 9,5 kW Chsdpjmt A Ivjfx Aflof power at 15 % ED:14,0 kW Drive: digital direct drives with indirect absolute path measuring system (no reference point approach) tool places: 212 Tool diameter: max. 65 mm Tool diameter with free neighboring places: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 stations) Tool change time: approx. 0.9 s (depending on control) Chip-to-chip time: approx. 2.1 s (control-dependent) Workpiece changing device: 0 / 180 Tool holder: HSK A 63 1 MACHINE DETAILS type of current: 3 / N / PE - 50/60 Hz operating voltage: 400 V power: 44 kVA rated current: 63 A Coolant system HL 450 / 900 LATE CONVEYOR Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 EQUIPMENT - CHIRON maintenance manual on screen - Operating hours and piece counter - Socket 230 V - Socket for portable mini handwheel - Control cabinet cooler as door-mounted unit - Signal lamp - splash guard cladding - chip conveyor - mini control panel - Rinsing gun - Central pneumatic connection - Fixture flushing - 70 bar HP pump - 1 internal cooling package with suction unit - Fully enclosed working chamber - Extraction unit with air cleaner - Extraction capacity 800 m³/h - CHIRON mold life monitoring with: - Automatic loading door of the splash guard - "opening" and "closing", actuation via two-hand start release - Integrated IWW 0/180° workpiece changing device - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 at the control cabinet instead of in the control panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic connection prepared for max. 20 connections, 6 connections are designed including connection couplings, 4 of them for hydraulics, max. 210 bar and 2 for uncontrolled pneumatics. - 4 Additional hydraulic connection(s) - Hydraulic power unit - 2 Hydraulic aggregate extension for further clamping circuits

Condition: like new (used), Year of construction: 2022, functionality: unexamined, machine/vehicle number: YF-240, type of input current: AC, Equipment: documentation/manual, In 2022 we purchased a new line, but the business direction changed and the line was never unpacked from the containers. The line is stored in 40HQ*3pcs container and in one 20GP container. Production capacity:220-300kg/hour WPC production line is applied to produce wood plastic composite products, like WPC decking, WPC door frames, WPC skirting and so on. by changing screw barrel and molds, it can produce both PE PP type WPC products and PVC type WPC products. features of wpc production line: - adopts double step production, first compounding & granulating, then extrusion - adopts bimetallic screw barrel, high hardness, more wearable - adopts parallel twin screw extruder for compounding & pelletizing, good exhausting effect, better plasticizing effect Cjdpfx Afsxb R Aijlehf Please view all the technical specification in attachments.

Condition: new, Cleaning centrifuge including buffer storage for dirty water, agitator and double-diaphragm compressed air pump. - new machine - numerous other variants and special designs on request Machine type: process water centrifuge solid-liquid Manufacturer: Eurotec Innovation GmbH Model: ZS38 PE Application: vibratory finishing technology, general solid-liquid separation, coolant processing, wet blasting, processing of industrial liquids Benefits: - High discharge capacity due to acceleration forces acting in the system of more than 1800 times the acceleration due to gravity - Management of the process water in a circuit, which minimizes operating costs and protects the environment - Saving of expensive additives for the vibratory finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems from the field of vibratory finishing, drying and process water technology that are exactly right for your application. Chodohrh Ntspfx Afljf From development to production: We supply all our products from a single source and everything is "Made in Germany". ----- Please contact us, we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation takes place by means of telecommunications (email, fax, telephone, message portal), where we first make you a non-binding offer, in which we also inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase/conclusion of contract takes place.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, total length: 10,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 9,200 kg, The PORĘBA TPK-90/8M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 8000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 10000 mm width: 1800 mm height: 1865 mm total weight: 9200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants Chsdpfxedyvh Nj Aflef - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - MULTIFIX quick change tool post

Condition: ready for operation (used), Year of construction: 2013, For sale is a used, fully functional refrigeration system with 4 Bitzer compressors, previously used in a small to medium-sized grocery store. The system supplied 4 cold storage rooms and wall-mounted refrigerated cabinets and was regularly serviced. 🔧 Technical details: 4 Bitzer compressors Refrigerant: R404A Includes control cabinet with frequency converter and controllers Condenser not included (sold separately) Weight: Unit approx. 550 kg, control cabinet approx. 250 kg Test log and technical documentation available upon request 📅 Operating life: The system was in operation until mid-April 2025 and is therefore demonstrably functional. It was professionally dismantled as part of an insolvency procedure. 📍 Viewing & Pickup: Viewings are possible by appointment at any time in 8943 Aigen 90, Aigen im Ennstal, Austria A forklift is available for pickup. 📩 If you are interested or have any further questions, please feel free to contact me! Cjdpjwk U N Usfx Aflshf Price upon request.

Condition: good (used), Year of construction: 1997, Vakuumpump Magnetic suspended compound molecular pump with controller Maker: Osaka Typ: TG 2003M Turbo Pump Specifications: Volume Flow Rate: N2: 2000 l/s H2: 1600 l/s Maximum Compression Ratio (Measured)1): N2: 108 H2: 4 x 103 Ultimate Pressure (After Braking): 10-10 Torr (10-9 Pa) Maximum Backing Pressure: 2 Torr (260 Pa) Rotor Speed: 400 S-1 (24, 000 rpm) Start-up Time in Vacuum: 10 min. Shutdown Time in Vacuum (with Brake): 10 min. Chsdsc Ut Ifepfx Aflsf Bearing System: Active 5-axis control magnetic bearing Permissible Braking Temperature at Inlet: 120°C max. Installation Position: In any position Weight (Without Power Supply): 70 kg. (does not include packaging either) Cooling: Air-cooling Ambient Temperature for Guaranteeing Ultimate Pressure: 10 ~ 23°C Permissible Ambient Temperature: 10 ~ 40°C Power Supply Specifications: Model: TD2000 Applicable Pump: TG2000M/2003M Input Power: 200/220 VAC, ±10%, Single-phase Maximum Input Current: 7 A Frequency: 400 Hz Permissible Ambient Temperature (With No Condensation): 0 ~ +40°C Weight: 35 kg. (does not include packaging for shipping)

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 15PO90915, Hello, I have for sale 2 TUCAL VPF plate freezers complete with a containerized refrigeration plant. Each unit comprises 34 freezing stations, each station holding three blocks, with each block weighing 13 kg and dimensions 590x390x70 mm. Approximate load per freezer is 1,360 kg per cycle, with a freezing time of 90–120 minutes. Chodow D Adgepfx Afljf Each plate freezer is equipped with a hydraulic unloading system. The frame is constructed from stainless steel; the plates are made of high-strength, corrosion-resistant aluminium.

Condition: new, Year of construction: 2025, TYTAN CENTER 750 Vario Lathe-Mill Combo 230V | Turning: 250 × 750 mm | Milling: 16 mm | Variable Spindle Speed The TYTAN CENTER 750 Vario is a versatile combination machine that merges a lathe and a milling machine into one compact unit—saving space and increasing functionality. It features independent spindle motors for both turning and milling, each with variable speed control. Ideal for small workshops, industrial repair shops, and home garages, it enables a wide range of machining operations without the need to switch machines. Key Features Two-in-one design – combines turning and milling in one compact, space-saving machine Independent spindle motors with variable speed – allows separate operation of lathe and mill functions LCD displays – precise spindle speed monitoring and adjustments for both units Two spindle speed ranges – adaptable to various materials and machining tasks Complex part machining – reduces repositioning between machines Rigid dovetail guideways – provide high stability during milling operations Technical Specifications LATHE Feature Value Chuck size 125 mm (3-jaw) Max. turning diameter over bed 250 mm Chjdpfxjw H Rdmj Aflsf Max. turning diameter over cross slide 150 mm Distance between centers 750 mm Bed width 135 mm Spindle bore 29 mm Spindle taper MT4 Spindle speed control Stepless (2 ranges) Spindle speed ranges 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 speeds (0.07–0.4 mm/rev) Tool post size 65 × 65 × 20 mm Max. tool size 12 × 12 mm Compound slide travel 70 mm Cross slide travel 130 mm Longitudinal slide travel 630 mm Tailstock quill diameter 30 mm Tailstock quill travel 70 mm Tailstock taper MT2 Motor power (S1/S6) 0.75 / 0.9 kW / 230 V MILLING HEAD Feature Value Max. drilling capacity 16 mm Spindle taper MT2 Spindle quill travel 50 mm Head tilt range –90° to +90° Spindle-to-column distance 170 mm Spindle-to-table distance 43 – 250 mm Spindle speed range 50 – 2250 RPM T-slots (number × width) 2 × 8 mm Motor power 0.6 kW / 230 V GENERAL Feature Value Machine dimensions (L × W × H) 1350 × 580 × 1630 mm Weight 230 kg Standard Equipment 125 mm 3-jaw chuck with reversible jaws Machine base Fixed centers MT2 and MT4 Drill chuck arbor and holder (MT2/B16) Change gears set Wrenches, grease gun, maintenance tools CE-compliant safety guards

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Cjdpfx Afsuiq Dholjhf Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning diameter over top slide: 530 mm, turning length: 3,000 mm, The PORĘBA TPK-80/3M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 3000 mm - turning diameter over bed: 800 mm - turning diameter over support: 530 mm - turning diameter in bridge recess: 1080 mm Codpfjfknw Rex Aflehf - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 5000 mm width: 1800 mm height: 1800 mm total weight: 6200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: used, functionality: fully functional, Agilent 6510 System + PC & Software. The set includes: -Agilent 6510 Q-TOF LC/MS Chedpfxst T T Tne Aflof -Agilent 1260 Infinity G1376A Capillary Pump -Agilent 1200 Series G1377A Micro Well Plate Autosampler -Agilent 1200 Series G1379B Micro Vacuum HPLC Degasser -PC & Software The Agilent 6510 Quadrupole Time-of-Flight LC/MS delivers unsurpassed Q-TOF sensitivity in a compact, bench-top design. With the 6510’s tenfold sensitivity advantage, you detect critical, low-level components that are out of reach of other Q-TOF instruments. At the same time, fast data acquisition means you can acquire one MS and five MS/MS spectra per second, for higher-quality data and more structural information from complex samples. And ultralow-ppm mass accuracy maximizes confidence in your results. Features: -Attomole-level sensitivity – Sensitivity unequaled by any Q-TOF on the market today enables the 6510 to detect more low-abundance components. -Better than 3-ppm mass accuracy – Outstanding mass accuracy, typically 1-2 ppm, rivals FTMS instruments and increases specificity and confidence in results. -Wide in-spectrum dynamic range – 3-4 orders of magnitude in-spectrum dynamic range enables identification of less-abundant compounds in the presence of more-abundant compounds and makes overall operation easier. -Fast MS and MS/MS acquisition – Fast spectral acquisition improves the identification of unresolved components in complex samples and makes the 6510 compatible with the latest fast chromatography. -Multiple ion source options- The best selection of ion sources in the LC/MS industry-including the revolutionary HPLC-Chip/MS and multimode ESI/APCI sources-allow the 6510 Q-TOF to address a wide range of LC/MS applications Good working condition. Please check out our other listings as well.

Year of construction: 2020, condition: good (used), functionality: fully functional, machine/vehicle number: 233846, We sell a used system BIO TURBO 6000, MFG: August 2020, serial number: 233846 Areas of use: medical, food: storing vegetables and fruits. The model BIO TURBO 6000 Maximum volume up to 200000 ft³ (6000 m³) per 24 hours. The Airflow 150 CFM (4 CMM). Location requirements are: electrical source 100-240 VAC. The circuit breaker 15 A Maintenance air filter must be changed every 6 months. The ozone Plate(s) must be changed every 12 months. The number of ozone plates are 4. Specifications - dimensions: generation chamber 10 x 12 x 10 inches (25 x 30 x 25 cm) Catalytic converter/ controller 12 x 19 x 16 inches (30 x 48 x 40 cm) Reaction Chamber 4 x 8 x 2 feet (122 x 244 x 61 cm) Total net weight 160 lb (60 kg) Construction materials: generation chamber aluminium Catalytic converter/controller: aluminium Perforated generator plate: stainless steel Controls Remote Control Power Switch LED’s for quick diagnostics Remote On and Off control Easy service Easy changing of ozone plates and filters Four models for proper coverage Aluminium and Stainless Steel generation chamber Easy to install and operate Low maintenance The Bio Turbo 6000 is referred to, as the BT 6000. The 6000 indicates the amount of cubic meters the unit can properly control within a 24 hour period. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their storage life. The BT 6000 was designed to remove ethylene from cold rooms and storage areas where fruits and vegetables are stored in order to extend their Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mold spores and viruses The Technology Bio Turbo is a patented technology for cleaning the air from all sorts of airborne organic compounds. Bio Turbo effectively removes ethylene gas (to prevent premature ripening), bacteria, mould spores and viruses. What differentiate Bio Turbo from competitors is its affordability and the ease of maintenance making it a great solution for commercial applications. Price: 11,500 Euro + VAT, negotiable, FCA: Oradea/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Csdpfx Afeurf I Ujlohf

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 5,000 mm, total length: 7,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 11,000 kg, spindle mount: MK 6, The PORĘBA TR-135B1/5M universal lathe has been comprehensively rebuilt and modernized in February 2025, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: in stock, under power, ready for technical acceptance. Technical data: - distance between centers/turning length: 5000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - Power feed on compound slide for machining tapers, conical parts, 1°- 90°, up to 450 mm - maximum workpiece weight between centers: 8,000 kg - maximum workpiece weight between centers + 1 steady: 10,000 kg - maximum workpiece weight between centers + 2 steadies: 11,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 7500 mm width: 2130 mm height: 1550 mm total weight: 13200 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover, chip tanks Additional equipment available for price upgrade: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration Chjdpfxova Elaj Aflef - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: used, functionality: fully functional, Agilent 6520 System + PC & Software. The set includes: -Agilent 6520 Accurate-Mass Q-TOF LC/MS -Agilent 1260 Infinity HPLC G1379B Micro Vacuum Degasser -Agilent 1200 Series G2226A Nano pump -Agilent G4240A HPLC-Chip Cube Interface - PC & Software The Agilent G6520 LCMS QTOF MS System is a high-performance mass spectrometry system designed for accurate and reliable analysis of complex samples. It features advanced ion optics, high-resolution mass spectrometry, and fast data acquisition rates, making it ideal for a wide range of applications in pharmaceuticals, biotechnology, and environmental analysis. With its intuitive software and user-friendly interface, the 6520 Q-TOF LC/MS MS System provides researchers with the tools they need to quickly and easily identify and quantify compounds in even the most challenging samples. Chsdpfxjt T Ub He Aflef The Agilent 6520 Q-TOF has industry-leading performance in the most important categories: attomole sensitivity, better than 2-ppm MS mass accuracy, better than 5-ppm MS/MS mass accuracy, mass resolution to 20,000, and broad mass range from 25 to 20,000 m/z. This is an ideal choice for top-down and bottom-up proteomics, metabolomics, and HRMS applications. Good working condition. Please check out our other listings as well.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle speed (max.): 800 rpm, spindle speed (min.): 8 rpm, overall weight: 8,000 kg, spindle mount: MK 6, The PORĘBA TPK-90/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Cedpfsiwa Iajx Aflehf Availability: on stock available, under power, technical inspection anytime after appointment Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 930 mm - turning diameter over support: 650 mm - turning diameter in bridge recess: 1200 mm - power on compound slide - spindle bore diameter: 95 mm - maximum workpiece weight between centers: 6,000 kg - maximum workpiece weight between centers + 1 steady: 7,500 kg - maximum workpiece weight between centers + 2 steadies: 9,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 8 - 800 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.1 – 12,8 transverse: 0.05 – 6,4 - engine power: 16/22 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 1800 mm height: 1800 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-600 mm, with rollers - MULTIFIX quick change tool post

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, total length: 8,500 mm, total width: 2,130 mm, total height: 1,550 mm, rotational speed (max.): 630 rpm, rotational speed (min.): 5 rpm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-135B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Technical data: - distance between centers/turning length: 6000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm - power drive on upper compound slide - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power: 27/41 kW (1st gear / 2nd gear) - overall dimensions: total length: 8500 mm width: 2130 mm height: 1550 mm total weight: 14100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: Chedpskyt Hlofx Afljf - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post