Used Continuous Feed Printer for sale (17,740)

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) Tjdpfjzhlr Esx Am Tja We will be happy to answer any further questions you may have by phone.

Condition: good (used), Feeding control, controller, level controller, control -Manufacturer: H. Grote Stall- und Melktechnik, Futtersteuerung Tjdpfx Aoxyf I Rem Tea -Type: TF 38/50 -Dimensions: 220/120/H250 mm -Weight: 2.4 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates Tjdpef Ek Hfjfx Am Tja -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg

Year of construction: 1977, condition: used, Gripper feed for eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Raster, collet feed from punching machine type HR 60 NL-4S -Stroke: mm -Dimensions: see photos -Transport dimensions: 900/640/H620 mm Tedpfx Ametigw No Tja -Weight: 200 kg

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor system: with sheet metal support -Speed: 2 m/min -Drive: VEM 0.18 kW -Dimensions: see photos Tsdpjvpd Huofx Am Tsa -Dimensions: 2540/780/H870 mm -Weight: 168 kg

Condition: good (used), Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case -Manufacturer: Dinse gas-cooled wire feeder case -Type: DIX -Quantity: 7x wire feeder cases available -Price: per piece -Dimensions: 700/250/H390 mm -Weight: 27 kg/pc. Tjdpfjvm U R Ejx Am Toa

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled Tedpfx Ajvw Radjm Toa -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Condition: good (used), Wire feed rollers for MIG / MAG hose package, feed motor for inert gas welding device, inert gas device -with: Euro plug-in coupling -Number: 4x wire feed rollers available -Price: per piece -for a surcharge: gear motor, electric motor, direct current motor are also available Tjdpfxocgan Ij Am Toa -Dimensions: 285/90/H180 mm -Weight: 2.5 kg

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 153 mm Todpsduiw Ijfx Am Tja -Passage: Ø 40 mm -Weight: 7 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Tsdpfxechyyme Am Toa -Feed flange: for drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 218 mm -Short cones: 6 -Bolt circle: Ø 155 mm -Bolt spacing: 110 mm -Quantity: 1x disc available -Weight: 9.2 kg

Condition: good (used), Chuck flange, flange mount, chuck flange, drive flange, intermediate flange, chuck faceplate, mounting flange -Muck flange: Mounting flange for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 162 mm -Socket: Short cone 5, cone Ø 79 - 82 mm -Hole circle: Ø 105 x 10 mm / Ø 62 mm M10 -Passage: Ø 41 mm -Dimensions: Ø 162 x 48 mm Tjdpfx Ameykpt Te Tsa -Weight: 4.7 kg

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm -Weight: 9 kg Tjdodz U Syjpfx Am Tja

Condition: good (used), Rotary hub drive, center turning device -Outer diameter: 315 -Cone: Ø 105 mm -Bolt circle: Ø 135 mm Tedpfeb A Nf Dsx Am Tsa -Weight: 20 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Tsdpfx Asdu Ufvem Tea -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 270 -Cone: Ø 139.7 mm -Camlock recording -Weight: 13 kg

Condition: good (used), Wire feed drive for wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder, actuator, actuator, air damper actuator, geared motor -Manufacturer: ELVI, actuator -Actuator: Type 100605 -Voltage: 24 V -Number: 6x drive units available -Price: per piece -Dimensions: 220/200/H120 mm -Weight: 1.9 kg/pc. Tjdpfjrgbu Hjx Am Toa

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Manufacturer: Roto Record, four-jaw chuck Ø 315 mm Todegtd A Djpfx Am Tja -Throughout: Ø 98 mm -Hole circle: Ø 290 mm -Weight: 30 kg

Condition: good (used), Panel-mounted measuring instrument, panel-mounted measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring instrument, control panel, temperature measuring device -with: Measurement and control technology type M19 -Measuring range: 20 - 600 °C -Connections: 6 Tsdpfx Aofcqrrsm Tsa -Dimensions: 545/285/H350 mm -Weight: 21 kg

Condition: good (used), Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key -Hexagon: SW 24 mm -Sleeve: Ø 45 mm Tedpfsfth Sbjx Am Tja -Dimensions: 870/45/H610 mm -Weight: 6.4 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 380 mm -Inner diameter: 103 mm Tsdof Ek Hmepfx Am Toa -Mount: Cone Ø 135 mm -Bolt circle: Ø 170 mm/M16 -Bolt circle: Ø 335 mm/M24 -Dimensions: Ø 380 x 105 mm -Weight: 37 kg

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A Tsdpfxewrrp Ue Am Tsa -Dimensions: 660/390/H350 mm -Weight: 23 kg

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Conveyor belt: Belt conveyor on solid base frame with feed hopper -Speed: 3.4/6.6 m/min -Belt width: 190 mm -Conveyor length: 745 mm -Drive: VEM 0.14/0.25 kW, see photo nameplate -Transport dimensions: 460/1255/H1185 mm -Weight: 149 kg Todpfjvazpuox Am Tja

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg Tsdevyq Duepfx Am Tea

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg Tsdpfx Amjhfufgo Tja

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge Tedpfei Exp Eex Am Tja -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange Tededu Ufijpfx Am Tsa -Feed flange for: bayonet disc mounting -Outer diameter: Ø 240 mm -Cone size: 6, cone Ø 106, hole circle Ø 133.4 mm -Weight: 7 kg