Used Continuous Shelf for sale (7,160)

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. Fodpsw Imp Hsfx Aanogi The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: new, Year of construction: 2026, operating hours: 20 h, functionality: fully functional, machine/vehicle number: RR400FS, area performance: 1,350 m²/h, overall weight: 80 kg, power: 0.3 kW (0.41 HP), battery voltage: 24 V, sweeping width: 350 mm, SCHORR Battery-Powered Scrubber-Dryer RR400FS, Single-Disc Machine With the RR400FS, you can complete wet cleaning and drying in a single pass. The 350 mm wide main brush loosens dirt and removes stubborn residues, while a metered amount of fresh water with cleaning agent is applied. Immediately behind it, the integrated vacuum system sucks up the dirty water. The RR400FS relies on robust and reliable technology without unnecessary frills. It is powered entirely by electricity via a 24V battery system with 32 Ah, which enables approximately 1.5 hours of continuous operation. It can be conveniently charged with the included charger at a standard power outlet. SCHORR Scrubber-Dryer RR400FS – Discover the advantages: ✓ Compact battery-powered scrubber-dryer for small to medium-sized hard floor areas ✓ Cleaning performance of up to 1,350 m²/h ✓ 350 mm main brush, scrubs and vacuums in one pass Fgedpfx Ajzh Hunjanoi ✓ Floor is immediately walkable thanks to the integrated vacuum system ✓ 7-liter fresh water and 12-liter dirty water tank, designed to prevent overflow ✓ Fully electric with 24V/32Ah, up to approximately 1.5 hours continuously ✓ Charger included, charges at a standard power outlet ✓ Well-supported: directly from the manufacturer, large spare parts inventory & workshop service Technical data Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR400FS Model: Electric Scrubber-Dryer Drive: Electric (battery) Weight including battery: 80 kg Tires: PU (non-slip) Wheels, number: 2 Overall length: 900 mm Overall width: 580 mm Overall height: 700 mm Fresh water tank volume: 7 l Dirty water tank volume: 12 l Main brush diameter: 350 mm Area performance: up to 1,350 m²/h Vacuum motor power: 300 W Brush motor power: 310 W Battery voltage/capacity: 24V / 32Ah Operating time: approx. 1.5 hours Charger: Included *Further technical data is available upon request. The scrubber-dryer is designed to be user-friendly and offers an intuitive interface that is easy to understand even for inexperienced users. With its ergonomic design and flexible steering, it enables effortless navigation through narrow spaces, ensuring efficient cleaning with minimal effort. The dirty water tank holds 12 liters, more than the 7-liter fresh water tank. This ensures that no more water is ever taken up than is dispensed at the front. The tank will also not overflow, even if foam forms. Once the work is done, drain the dirty water in a controlled manner, and the compact machine can be quickly stored. Of course, we usually have all the spare parts in stock and can deliver them quickly if you should encounter any problems. If you require technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the device? No problem! We also offer attractive options for this. Just contact us, and we will advise you on the various possibilities. We look forward to your inquiry! We at SCHORR are happy to answer any questions you may have about our scrubber-dryer. You can reach our competent team by telephone or email. We look forward to hearing from you and assisting you with your consultation.

Condition: used, Year of construction: 2010, Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Fgodpfxewblk Rj Aanji Speed: 1,25 m/s Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Year of construction: 2013, condition: used, Used Riehle Conveyor Fryer, DLA600-3 Series The DLA 600 conveyor fryer is designed for continuous frying of products, ensuring consistent frying quality. Products are placed onto the loading belt and automatically conveyed into the frying tank. The conveyor belt then transports the product fully submerged throughout the length of the fryer tank up to the end. Submersion frying notably reduces frying times by up to 40%. The fryer can be used not only with oil; water, soups, sauces, marinades, syrups, etc. can also be used. Fodpfow Ngu Sjx Aanogi Technical data: - Length: 2900 mm - Fryer tank length (frying zone): 2350 mm - Working width: 585 mm - Max product height: 55 mm - Maximum fat/oil volume: 260 L - Frying time in minutes: 55 sec – 11 min (depending on product type) - Power: 56 kW

Condition: excellent (used), Year of construction: 2022, Warehouse trolleys with shelf. Dimensions: width: 250 cm Fgsdpfx Aexmt Ewsanei depth: 115 cm height: 230 cm The Corletta can be used for in-plant transport and storage of almost all types of goods. Thanks to the ability to stack up to three layers, the full warehouse height can be utilized. Stock available: 1000 pcs.

Condition: used, Continuous Casting Machine Fsdjxixkwjpfx Aanjgi

Condition: used, functionality: fully functional, capacity of 3 buckets, each 800 kg Fgodpfx Aaoxd H Itjnei

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Fgodpfx Aaozrg T Eonei Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, Year of construction: 2025, COLOMBO R. Discontinuous sandwich panel production line Complete PUR sandwich panel production line for manufacturing panels up to 8 meters in length. Fully automated and equipped with a heated press, high-pressure foaming machine, and integrated roll forming system. A high-performance industrial solution for producing roof and wall sandwich panels in compliance with European standards. Production specifications - Production of sandwich panels up to 8 meters long. - Panel thickness: 40 - 100 mm. - Pre-painted steel thickness: 0.40–0.80 mm. - Manufacturing of roof and wall sandwich panels. - Capability to produce tile-effect sandwich panels. - Automatic cut-to-length system. - Automated machine settings. - Electrical components from leading brands: Siemens, Rexroth, Schneider Electric, Omron, and SMC. Line configuration - 4-platen heated press. - Maximum panel length: 8 meters. - Production of polyurethane (PUR) insulated sandwich panels. - ULTRAMIX 100 high-pressure foaming machine with 1:1 mixing ratio and self-cleaning mixing head. - Complete roll forming line for steel facings. - Two roll forming lines for manufacturing different panel profiles. - 7-ton hydraulic decoilers. - Automatic hydraulic cutting system. - PLC control system with touchscreen interface. - Automatic control of panel lengths and production quantities. - Fully automatic dosing of foam components. - CE-compliant installation with integrated safety systems. Included Fgedpfszrhtmox Aanoi - Complete production line. - High-pressure foaming machine. - Heated press. - Roll forming equipment. - Outfeed tables. - Electrical control cabinet. - PLC control system. - Technical documentation included. Panel length: Up to 8 meters Panel thickness: 40 - 100 mm Pre-painted steel thickness: 0.40 – 0.80 mm Panel types: Roof and wall sandwich panels, capability to produce tile-effect sandwich panels Control system: PLC control with touchscreen interface and automatic settings Foaming machine: ULTRAMIX 100 high-pressure foaming machine (1:1 mixing ratio) Press type: 4-platen heated press

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm Fgjdpfx Aoznng Soanoi stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies - Original operating instructions

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, shelf length: 2,700 mm, load capacity: 600 kg, frame height: 9,000 mm, Jungheinrich MPB pallet racking – over 1,000 frames and several thousand beams We offer for sale a very large quantity of used Jungheinrich MPB pallet racking. Fedezrnnkepfx Aanjgi Available components: Frames: heights from 3000 mm to 10,000 mm, over 1,000 units, various height and load-bearing capacity options. Beams, 2700 mm long: load capacity 3 x 500 kg, load capacity 3 x 600 kg, load capacity 3 x 800 kg. Beams, 3600 mm long: load capacity 4 x 500 kg, load capacity 4 x 600 kg. A total of several thousand beams are available, allowing for the preparation of both individual racking rows and complete warehouse installations. It is possible to purchase entire batches or selected quantities. Upon request, we will prepare a configuration tailored to the warehouse height, the type of pallets, and the required number of pallet spaces. We also offer: dismantling and assembly of racking, transport, preparation of a layout plan, selection of additional components and safety features. Please contact us to obtain a detailed offer, an up-to-date list of available components, and photographs.

Condition: excellent (used), Continuous Sterilizer / Cooker-Cooler FMC-JBT STERILMATIC – 1 kg Format Continuous sterilizer FMC-JBT STERILMATIC (Cooker-Cooler), designed for the continuous thermal treatment of packaged food products, automating the sterilization and cooling stages within a high-production industrial line. This type of system is especially designed for canning plants that need to replace batch processing with a continuous flow of packages, allowing for the constant input of product, its thermal treatment for a controlled time, and subsequent cooling before continuing to the next stages of the line. Equipment configured for an approximate 1 kg format. MAIN FEATURES -Manufacturer: FMC / JBT -Series: STERILMATIC -Type: Continuous sterilizer / Cooker-Cooler -Installed format: 1 kg -Continuous thermal treatment of packages -Automatic sterilization and cooling process -Continuous product transport Fgodpfxozxcb Ej Aansi -Control of dwell time during the process -Industrial thermal circulation system -Integrated treatment sections -Piping, valve, and process distribution system -Integrated fans / circulation systems -Robust industrial construction -Designed for continuous operation -Especially suitable for high-capacity canning lines PROCESS The FMC-JBT STERILMATIC is designed to perform the thermal treatment of packages as they continuously move through the equipment. The previously filled and sealed packages are automatically introduced into the system, where they remain for a controlled process time and are subjected to the established thermal conditions to achieve the required treatment. Subsequently, the packages move to the cooling stage, progressively reducing their temperature before being discharged and transferred to the next production operations. The continuous system avoids the repetitive loading and unloading operations typical of conventional batch autoclaves and is particularly interesting for lines with large production volumes. APPLICATIONS Especially suitable for canning industries and manufacturers of high-production canned foods that require a continuous thermal process. It can be integrated into production lines for vegetables, legumes, tomato products, fish, meat, pet food, ready meals, and other packaged foods, always in accordance with the configured format and thermal process. The combination of FMC-JBT STERILMATIC technology, continuous sterilization, and Cooker-Cooler system provides an industrial solution for large-capacity canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Fgsdpfoy Uuu Ejx Aanei Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. Fgedezg Dlbjpfx Aanji • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: used, This package includes: 20 x crossbeams, 2,700 mm each (yellow) 40 x securing pins - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbeam length: 2,700 mm Crossbeam height: 140 mm Shelf load capacity: 3,000 kg Accessories such as: Floor mounting Connectors Load warning labels Impact protection Guard rails Grating Back panel grating Deep shelf supports Barrier railings and much more... Just ask us! "Benefit from over 20 years of industry experience – we will provide you with competent and personal advice as your experienced specialist retailer for new and used shelving systems." Sales and Delivery Conditions (B2B) Fedozuyrmjpfx Aansgi - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer Status: All offers are subject to change and non-binding. We reserve the right to sell items in the meantime. - Reservation of Title: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive sale to commercial businesses (§ 14 BGB). For used and IIa goods, there is an exclusion of liability for material defects. For new goods, the respective manufacturer's warranties apply.

Condition: used, This package includes: 38 x crossbars, 2,700 mm each (yellow) 76 x locking pins - Remaining stock - Manufacturer: Tegometall Condition: used, good condition Crossbar length: 2,700 mm Crossbar height: 130 mm Shelf load capacity: 2,700 kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guard rails Grating Rear panel grating Deep shelf supports Barrier rails and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide competent and personalized advice as your experienced specialist retailer for new and used shelving systems." Sales & Delivery Terms (B2B) Fgedpfszuyrtex Aansi - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are subject to change. Items may be sold subject to prior sale. - Retention of title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials and workmanship is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR220 (2-line version) ± 100 L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 18,5 Kw - 978 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 150L Single mixing shaft execution with adjustable paddles Motor 1.5 KW - 1461/64 rpm Extruder BR220 Dual execution, 2 extrusion heads Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Fsdpfo Agvygsx Aanogi Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm Possibility to run 2 separate products, 2 extrusion lines on 1 frame. without electric cabinet and controls

Condition: used, Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Dimensions: 1015/950/1830 mm -Material: stainless steel -Weight: 90 kg Fedpfjd Ty Aqsx Aansgi

Condition: good (used), Frame: 9000*1100 mm Traverses: 2700*110 mm (2400 kg/compartment) If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves and accessories and are happy to support you with your planning. Fgedpfx Aajuf Sk Ujnji Additional accessories such as: Frame, corner and impact protection, push-through protection, chipboard, gratings, rear wall grilles, depth bars available. Shipping: Please enquire about the shipping costs, stating your postcode and location, as well as the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in the technical data, information and prices, as well as prior sale!

Condition: used, 60 linear meters of Bito P5 pallet racking Fjdpfotucp Nox Aanegi Used item in very good condition, see photos. Height 4.5 m Depth 110 cm, galvanized Field load 16000 kg Beam length 3.6 m, blue Beams with load capacity per shelf 4000 kg Negotiable price: €4,290.00 net ex warehouse The offer includes: + 17 units of frames, pre-assembled, depth 110 cm, height 4.5 m + 64 units of beams, length 3.6 m, 4000 kg load capacity per shelf + 128 units of safety locks + 68 units of concrete anchors Used corner protectors are immediately available, surcharge per unit €15.00 net! Further accessories such as bracing plates, insert grates, etc. are available on request. Load capacity signs, documents, etc. are included. Further accessories can be found in the accessories catalog. The item is in stock. Transport and assembly are possible upon request. Inspection is possible at any time by appointment. Further information is available on request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, specifications and prices as well as prior sale reserved! See our general terms and conditions, all prices excl. VAT ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers in new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods handled weekly for maximum selection 📦 OUR RANGE (BUY ONLINE AT A LOW PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a real all-round worry-free package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock, including complete clearance. 2. Commission auction: Carrying out auctions on behalf of the client. Our full service provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: good (used), functionality: fully functional, FRUIT SHELF VEGETABLE SHELF SALES SHELF TOP CONDITION used & good Our offer is aimed at retailers, traders and public institutions. Item no. VKShelf Manufacturer: unknown Item used and in good condition Dimensions: 245 x 100 x 150cm (WxDxH) Price quotation for fruit rack piece double element a 2.45 m length for collection from stock 47441 Moers Price refers to a double shelf element with neutral advertising sign - as shown in the original photo, Inspection is expressly offered. Fsdpfx Ajr Dtg Toansgi further technology in stock see photos or inquire by phone General information: We offer items here from various acquisitions, which we describe as well as possible and post informative photos. Further details about the item cannot be given. We offer the opportunity to view items on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. Due to time constraints, we can only offer answers to this item if you provide us with a telephone number with your inquiry. Unless expressly described, this offer is for USED goods. Items have been visually inspected and are technically ok. All prices quoted are net prices. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. all dimensions are approximate

Condition: used, Available in 9550 mm length or as a complete frame. If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Further accessories available, such as: frame, corner, and impact protection, anti-push-through guards, chipboard, grating, rear panel grating, and deep shelf supports. Shipping: Please request shipping costs by specifying your postal code and location, as well as the desired quantity of items. Further service offerings: Fsdpfx Aev D Ix Djanogi Planning, shelving assembly/disassembly, purchase/sale. Subject to changes and errors in technical data, specifications, and prices, as well as items being sold in the meantime!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Fedpjz N A Npofx Aanjgi Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Condition: used, Year of construction: 1996, machine/vehicle number: VKD5000G, power: 180 kW (244.73 HP), temperature: 1,120 °C, inner dimension length: 5,000 mm, inner dimension width: 550 mm, inner dimension height: 130 mm, number of chambers: 3, year of last overhaul: 2025, We offer a used WMU VKD5000G protective gas conveyor furnace (continuous belt furnace), year of manufacture 1996. The system is ideally suited for soldering and annealing stainless steel components. Technical data: Heated length: 5000 mm Number of heating zones: 3 Operating temperature: up to 1120 °C Fgjdpey Nyqzsfx Aanei Usable width: 550 mm Usable height: 130 mm Heating power: 180 kW Protective gas: Hydrogen / Nitrogen The furnace was relined in 2025 and is equipped with an almost as-new furnace muffle. If you have any questions or require further information, please do not hesitate to contact us by phone or email at any time.

Condition: new, fuel type: diesel, motor manufacturer: Cummins 4BTAA3.3-G14, General information Fgjdpfx Ae Ahvwxjansi Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.263 kg Functional Generator capacity: 55 kVA Dimensions of cargo space: 232 x 102 x 169 cm CE mark: yes Other information Fuel consumption: 10.2 Liter per Hour at 75% Load Generator: Stamford UC224D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 200 l Production country: PT Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = Requesting a EUR.1 Certificate is possible for this Generator. Warranty: 1 year for continuous use 2 years for standby use