Used Cooling for sale (7,580)

Year of construction: 2012, condition: used, functionality: fully functional, Reisner KWR-S 100 HK cooling system Water Temperature 12-16°C Cooling capacity 120kW Winter relief Technical data Chiller KWR-K 100 KS/ Compressor: Piston compressor Volume flow: 110 m³/h Refrigerant: R407c Speed: 1,450 rpm Cooling capacity: 112 kW Power consumption: 37 kW Coefficient of performance 3.5 (average) Evaporating temperature +7°C Condensation temperature 45°C Operating voltage 400 V-3 PH-50 Hz Cooling capacity (dry cooler) 150 kW Duedpfx Aszh E Awsnysw Air inlet temperature 35°C Maximum air inlet temperature 45°C Air volume flow 45,600 m³/h Number of fans 4 Current draw per motor 7.2 A Power consumption per motor 0.9 kW (controlled) Operating voltage: 400 V-3 PH-50 Hz Sound pressure level 65.7 dB (A) at 10 m Device length: 5,350 mm Device width: 1,123 mm Device height: 1,150 mm Empty weight: 418 kg

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Djdpfx Ansyvrvpjyeuw Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Year of construction: 2005, condition: excellent (used), Name: Vertical heating cooling mixer Manufacturer: Lödige Type: TSHK160 / KGU400 Year built: 2005 Speed: 104 / 300-1500 rpm Hours of operation: Very few operating hours Material: Stainless steel Driving force: 11 / 45 kW Model: ATEX version / Explosion proof Total content: Heating mixer: 210 liters / cooling mixer: 391 liters Parts in contact with product: 1.4541 Gear box: Bevel gear motor/ motor frequency controlled Dimensions: L 4605 x W 4225 x H 3550 mm Duedjiup H Tspfx Anyjw Technical doc.: Yes Message: Technical center operation. Wood chips / melanin wood additives Accessories: Platform with stairs, 30 kW temperature control unit, control panel, control cabinet, dust filter

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, TOP Cooling Channel Dedy Dedpeyy Saisfx Anyjuw Cooling unit installed Only available from us, DGUV V3 certified Dimensions approx.: 6000 x 800 x 1300 mm, W x D x H Connection: 230 V, 5 kW Used machine, cleaned Warranty Optional: Maintenance contract Spare parts box Delivery service Instruction and commissioning

Condition: good (used), Year of construction: 2002, Screw compressor, water-cooled, manufactured by BOGE, type: SO150, year of manufacture: 2002. Final compression pressure: 10 bar, motor power: 110 kW. Includes refrigerant dryer. Dedsh Hi Injpfx Anysuw Dimensions: Length 3.5 m, width 1.5 m, height 1.7 m, weight approximately 3200 kg. Documentation available.

Condition: used, Kelch Shrinking Device / S2 Shrinking Unit Tool Shrinking and Cooling Device Tool Holder HSK 40 You are welcome to come for an inspection. We are happy to organize affordable shipping for you! Dedpsxxlgqjfx Anyeuw You will receive a proper invoice. A net invoice can also be issued for international customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: as good as new (ex-display), Heat exchanger, cooling condenser, Güntner heat exchanger, GVV050.1A/1-X.E, used machine Manufacturer: Güntner Type: GVV050.1A/1-X.E Year: 2016 Overall dimensions: 1050 x 460 x 820 mm Dodpfx Anszk A Upsyouw Fan size: 830 x 680 mm Cooling surface: 875 x 810 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Mixer / Paddle mixer with twin shaft, CO2-cooled with vacuum and pump, equipped with a box lifter for pallet containers, capacity 4000 litres Mixer / Paddle mixer with twin shaft, vacuum-cooled, manufactured by Seydelmann, fitted with Oslos lifter for pallet boxes, Dedpfx Answxmv Njyouw Model PV 4000 Machine number: 11423-1 Year of manufacture: 2011 Voltage: 400 V, 50 Hz, 125 A Power: 60 kW Weight: 6500 kg Dimensions: 4250 mm x 2300 mm x 2750 mm. Lifter Brand: Oslos Model: Column Loader 1000S Serial number: E0112707705119/9002 Year of manufacture: 09/2021 Voltage: 380 V, 3 Ph, 50 Hz, 5.2 A Power: 2.2 kW Lifting capacity: 1000 kg Lifter dimensions: 700 mm x 2600 mm x 4200 mm Lifting arm dimensions: 1750 mm x 1600 mm x 1250 mm

Condition: excellent (used), Year of construction: 2019, Speck Anlagentechnik Speck pumping station, SPH-R-055-2 DR control system including 2 IN-VB 25-30F 11-E 3A5-055 centrifugal pumps and 2 RTG actuators + Frame and 2 2-inch stainless steel manifolds (supply/return) + 3000L tank (2 chambers) + Complete 2-inch stainless steel piping + All sensors and actuators/valves/sensors + Optional: approximately 250m of 2-inch hose including quick-release couplings and shut-off valves Pumps were dismantled in working order. Dismantled and packed on several pallets. Dujdpfx Aewi Icxonyjw Systems new price: €85,000. Item location: 75053 Gondelsheim. Used condition, see pictures. Shipping via freight forwarder or pickup by appointment.

Condition: excellent (used), Year of construction: 2008, 355 USED WP Aroma Cooler, a device for rapid cooling of bread and baked goods. TECHNICAL DATA: - Cooling temperature to: +18°C EXTERNAL DIMENSIONS (in cm): - height 305, - width 130, - length 227. INTERNAL DIMENSIONS (in cm): - height 198, - width 78, - length 187. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile. Duedpfx Ajywummonyow

Condition: excellent (used), functionality: fully functional, Seydelmann paddle mixer / batch mixer with vacuum, CO2 cooling, and pressure pump, 4000 liters. Column loading. 2 units available, can be purchased separately. Twin-shaft paddle mixer, vacuum cooled, by Seydelmann, with Oslos column lifter for pallet crates, Model PV 4000 Voltage: 400 V, 50 Hz, 125 A Power: 60 kW Djdpfx Anjwxm E Royjuw Weight: 6500 kg Dimensions: 4250 mm x 2300 mm x 2750 mm. Lifter Brand: Oslos Model: Column Loader 1000S Voltage: 380 V, 3 Phase, 50 Hz, 5.2 A Power: 2.2 kW Lifting capacity: 1000 kg Lifter dimensions: 700 mm x 2600 mm x 4200 mm Lifting arm dimensions: 1750 mm x 1600 mm x 1250 mm

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (max.): 420 A, ESAB Power Mig LAW 420W – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 420 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Burnbacktime adjustable End current Including: 4-metre welding torch, ground cable with clamp, gas hose, and 1-metre interconnecting cable. Visits by appointment only. Duedpszakr Ajfx Anyow Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, TECHNICAL DETAILS Dodpfx Aowttdpjnyeuw - Rated power : 38 [kW] - Power consumption : 0.013 [kW] WEIGHT & DIMENSIONS - Machine weight : 300 [kg]

Condition: used, TECHNICAL DETAILS - Rated power C1 : 24 [kW] - Rated power C2 : 14 [kW] - Power consumption : 16.7 [kW] - Gas load in C1 : 5 [kg] - Gas load in C2 : 3.3 [kg] - Max. storage temperature : 45 [°C] - Max. refrigerant temperature : 95 [°C] Djdpfxsylp Ugo Anyouw - Min. refrigerant temperature : -10 [°C] - Max. permissible pressure HP : 40.5 [bars] - Max. permissible pressure LP : 15 [bars] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine weight : 450 [kg]

Condition: used, TECHNICAL DETAILS - Voltage: 400 V / 50 [Hz] - Power: 37 kW at 40 [°C] - With water/water variant - Refrigerant R134A - 7.6 kg / 10.9 tco2 - 20.6 bar max. - Pump volume flow: 4.0 m3/h at 66.6 l/min Duedpfxsx Tvins Anyew - Water quantity for cooling the system: 3.9 m3/h at 65 l/min - Dimensions (L x W x H): 1940 x 880 x 2000 [mm] - Weight: 644 [kg]

Condition: used, maximum load weight: 33,479 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2016, next inspection (TÜV): 04/2027, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Additional information: * Type | First axle: Michelin * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Michelin * Type | Third axle: Michelin * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Position | First axle: Rear * Brand | First axle: Other * Lifting axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes Additional features: * Rear doors * Homepage * Tail lift * Lifting axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the German border | 20 km from Rotterdam The Hague Airport Duodpfxoy Tgnbj Anyew Disclaimer: Subject to changes, prior sale, and errors. The stated prices exclude BPM and are only valid for export.

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Duodpfx Aezbau Nenyow

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Dsdpfx Anoynkbmoyouw Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: new, Year of construction: 2020, Rittal TopTherm enclosure cooling units – types SK 3304540 and SK 3329540, new and unused. Both units are designed for 400V / 50Hz and 460V / 60Hz and are available from stock. Dodoy Iyvbepfx Anyjuw Available for immediate delivery.

Condition: good (used), Swegon Teal 16.2ST 2PS air cooler water chiller Dsdpfxoqqhrhe Anyjuw Refrigerant R401A

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Duedpfx Aopu R Ncjnyjw Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: R500, For sale is a FiberFlow R500 cooling die, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The cooling die is used to produce fibrous protein structures in a targeted manner through defined cooling and flow control, and is particularly designed for applications in the field of plant-based meat and fish alternatives, as well as structured convenience products. The FiberFlow R500 is designed for a throughput of up to 500 kg/h at pressures of up to 70 bar. The ring-shaped geometry ensures optimal flow control, which leads to uniform fiber formation and high product quality. The system has a modular design and comprises 4 segments, which are sold together. Particular attention was paid to hygienic design, ensuring that the system meets the high requirements of the food industry. The design allows for easy and quick cleaning. Duodpfx Anjy Um Tgeyow The FiberFlow R500 is designed for integration into existing extrusion lines and can be seamlessly integrated into continuous production environments from a process engineering perspective.

Condition: used, Cooling unit cooling water cooler ARO type VWK 31/1-S Factory number year of manufacture 2007 Dujdpfx Anovw A T Njyew Cooling capacity 3500 watts Ambient temperature max. 32°C Refrigerant R407C Refrigerant filling quantity 0.98 kg Operating pressure of cooling compressor max. 29.5 bar Water tank capacity approx. 8 liters Discharge volume of circulation pump 27 liters/min. (1620 liters/h) Water connections quick release coupling Rectus type 26 Power connection 230 volts, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulation pump (250 watts) Space requirement L x W x H 700 x 550 x 520 mm Weight 75 kg Good condition

Condition: used, mileage: 135,000 km, power: 115 kW (156.36 HP), first registration: 12/2012, fuel type: diesel, empty load weight: 5,530 kg, overall weight: 7,490 kg, wheelbase: 4,250 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 3, total length: 7,220 mm, total width: 2,600 mm, total height: 3,340 mm, loading space length: 4,950 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Equipment: cooling unit, tail-lift, truck registration, Refrigerated box with an internal length of 4.95 m, Thermo King MD-100 deep-freeze unit, Diesel/electric refrigeration unit, Standby cooling (mains operation 380 V) and driving cooling down to -29°C, Palfinger tail lift, 1000 kg capacity, Wheelbase 4250 mm, 6-speed transmission, Driver's air suspension seat, Dedpfoynl R Ajx Anysuw Double passenger seat, Gross vehicle weight 7.49 t, Payload 1.96 t, EURO 5, German registration Mileage according to odometer Vehicle preferably sold to commercial businesses or for export, Private sales subject to approval Sold without warranty Net price for export Net: 10,000 EUR + (19% VAT) 1,900 EUR = Gross: 11,900 EUR The above information is non-binding; errors/changes and prior sale are subject to approval! T 08026/2188

Condition: used, maximum load weight: 33,469 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 11/2014, next inspection (TÜV): 11/2026, total width: 2,600 mm, total height: 3,950 mm, Year of construction: 2014, Additional information: * Type | First axle: Michelin R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 40% * Tire tread depth inner right | First axle: 40% * Maximum axle load | First axle: 9000 kg * Type | Second axle: Michelin R * Type | Third axle: Michelin R * Tire size | Second axle: 385/65 R22.5 * Tire size | Third axle: 385/65 R22.5 * Tire tread depth inner left | Second axle: 40% * Tire tread depth inner left | Third axle: 40% * Tire tread depth inner right | Second axle: 40% * Tire tread depth inner right | Third axle: 40% * Maximum axle load | Second axle: 9000 kg * Maximum axle load | Third axle: 9000 kg * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Position | First axle: Rear * Brand | First axle: Other * Lifting axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes Dodpfxjy Sdt Se Anysuw Additional features: * Rear doors * Homepage * Tail lift * Lifting axle * SemCollection Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire about the costs and procedures for your respective country in advance. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors. The stated prices exclude BPM and are only valid for export.