Used Cooling for sale (7,708)

Condition: like new (used), Year of construction: 2021, operating hours: 180 h, functionality: fully functional, cooling capacity: 29 kW (39.43 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, temperature: 10 °C, volume flow: 4.5 m³/h, total width: 830 mm, total length: 1,240 mm, total height: 2,030 mm, noise level: 62 dB, empty load weight: 540 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, KKT cBoxX40 chiller, year of manufacture 2021, air-cooled cooling unit for frost-free indoor installation. Cooling capacity 29 kW (at water supply temperature 10 °C, ambient temperature 35 °C). Refrigerant R410A, compressor with energy-efficient scroll technology. Condenser in a compact design with high fin efficiency and low refrigerant charge. Speed-controlled fan with EC-Blue technology according to ErP 2015, corrosion-resistant Owlet blades. Electronic expansion valve with high control accuracy. Evaporator as a plate heat exchanger in an asymmetrical design. Water circuit: customer-specific piping with external connections, insulated stainless steel tank (1.4301) in an atmospherically open design, electronic level monitoring incl. low water/dry-run protection, temperature and pressure display in refrigerant supply and return, flow control for evaporator protection, multi-stage centrifugal pump. Control cabinet: design according to DIN EN 60204 Part 1 and VDE 0113 Part 1, controller with plain text display (multilingual, including German, English, French), main switch, motor protection switch, transformer for 24 V DC control circuit, status display, protection class IP54, collective fault/warning message with potential-free contact, potential-free remote control, short-cycling protection, limit value monitoring min./max. Gbodpfx Aaozzvgasyjt Technical data: flow rate 4.5 m³/h, free pump pressure 3.0 bar, air flow rate 9,350 m³/h, sound pressure level 62 dB(A), permissible ambient temperature +5 to +45 °C, tank volume 300 l, water connection Rp 1 1/2", operating voltage 400/3/50, dimensions (H×W×L) 2,030×830×1,240 mm, net weight 540 kg. Additionally included: insulation of the refrigerant lines and the pump inside the housing, overpressure valve for standby operation, level kit (supplied loose) for height differences >500 mm between chiller and consumer, leveling feet (supplied loose) for vibration decoupling and height compensation up to 5° floor slope. Complies with the Ecodesign Directive (EU) 2015/1095 and (EU) 2016/2281. Condition, history and handling: year of manufacture 2021, ordered 07/2021, delivery week 38/2021. The unit was operated in conjunction with a Sollich temperature control system, the production use of which amounted to approximately 180 operating hours; an operating hour counter is not available. Stored in Wuppertal since the end of 2024, inspection by appointment. Purchase value in 2021 according to offer: 9,800 € net. Sale from commercial to commercial, excluding warranty, technical data according to manufacturer's documents, errors and omissions excepted. This cooling unit is also available as part of a complete temperature control and mixing system (including Turbo temperature controller TE 1600 D and nut mixing unit NM 200 VA), see advertisement ID A22725782.

Condition: good (used), functionality: fully functional, power: 26 kW (35.35 HP), tank capacity: 3,000 l, For sale is an Alco AMP 3000 V vacuum mixer with a cooling option! The system is offered including a base platform and a mobile loader for 200-liter meat containers! TECHNICAL DETAILS Two horizontal, parallel arranged mixing shafts Collision-free shaft geometry Product-specific shaft geometry for efficient and homogeneous mixing, even with sensitive products. Capacity: 3,000 liters Power: 26 kW Mixer dimensions Length: 3,700 mm Gbsdpfx Aaszzpz Royst Width: 1,700 mm Height: 2,900 mm Base platform dimensions Length: 2,100 mm Width: 800 mm Height: 2,400 mm Mobile loader dimensions Length: 1,450 mm Width: 1,300 mm Height: 3,400 mm EQUIPMENT Cooling option Base platform Mobile loader for 200-liter meat containers

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die (year of manufacture 2024) from DIL Engineering GmbH, a specially developed solution for structuring alternative proteins in high-moisture extrusion (HME). The FiberFlow F50 is designed specifically for research and development (R&D) applications, product development, and pilot trials. With a throughput of up to 50 kg/h, it is ideal for developing and optimizing formulations and processes in the field of alternative proteins, for example, for plant-based or hybrid meat and fish alternatives. By precisely cooling the extrudate, fibrous and meat-like product structures can be created. Gedszr Hq Repfx Aayebt The system has a modular design and can be configured with one or two segments, depending on the requirements. In addition, one or two separate cooling circuits are available, which ensures precise temperature control and, consequently, consistently high product quality. The integration of inline measuring systems is possible and allows for continuous process monitoring and optimization. Particular emphasis was placed on hygienic design, ensuring that the system meets the high requirements of the food industry. Due to the well-thought-out design, cleaning is simple and fast, which is a major advantage, especially in development operations. The FiberFlow F50 can be combined with a wide range of different extruder types and manufacturers. If required, a customer-specific adapter can be manufactured for the mechanical connection to the respective extruder (offered individually depending on the existing extruder). We would be happy to check the technical compatibility with your existing extrusion system in advance.

Condition: good (used), Year of construction: 2019, Centauro MTE-4J2-24 Industrial cubic air evaporator 2019, used for commercial refrigeration and cold rooms, powered by dual 450mm fans, cooling capacity of around 24Kw, two in stock, 3Ph Gsdpfx Aajzvllbjyobt

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Gjdpjxlkg Asfx Aayebt Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, total height: 1,900 mm, total width: 2,270 mm, total length: 5,380 mm, overall weight: 3,200 kg, operating pressure: 6 bar, year of last overhaul: 2026, power: 20 kW (27.19 HP), Equipment: documentation/manual, For sale is a scarcely used cooling tunnel in very good condition. The system has only been used a few times and is therefore in very good condition. I have attached the PDF, which provides a detailed description of the machine with pictures. The cooling tunnel can be inspected on-site in operation after prior arrangement. Interested parties are welcome to view the condition of the system in person. Godpszw E Tnsfx Aayobt

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one. Gedpfx Ajzi Em Sjaysbt

Year of construction: 2016, condition: used, Cooling unit Frigo Carrier Supra 1250Mt Gedpfxezl Tqqj Aaysbt Year of manufacture: 2016 Complete with condensers and 8-meter cooling unit. Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, cools with ambient temperature all stainless steel adjustable speed total length ± 5.000 mm nett belt length ± 4.000 mm nett belt width ± 600 mm stainless steel mesh wire belt Gbedpfszza Hqex Aayjt outside dimensions (l x w x h) : ± 5.000 x 1.000 x 1.500 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 10 kW (13.60 HP), Negative-temperature refrigeration unit with evaporative cooling for negative-temperature chambers, -20°C. Power: 10 kW Operating conditions: -28/35°C Godpozz N Ttefx Aayobt In very good overall condition.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 Gbedpfx Aajzzrmpsyst max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: used, This listing is for the Cole Parmer Techne Blockice Cooling Heating Block The unit is in full working condition and is ready for immediate use The Cole Parmer Techne BLoCKICE (also referred to as CB-200, FBLOCKICE) is a benchtop Peltier-cooled/heated block designed for precise incubation of sample tubes between 0 °C and 40 °C, ideal for maintaining biological samples within the 4–37 °C range Precise temperature control: Utilizes Isotemp™ technology to ensure uniform temperature across both aluminum blocks, with stability to ±0.2 °C Versatile block inserts: Holds two standard interchangeable aluminum insert blocks from the Dri‑Block® range; can use one double-width insert for higher tube volumes Timer & alert system: Integrated count-up/count-down timer programmable up to 9 days. Timer begins only once the set temperature is achieved, with an audible buzzer at completion User-friendly interface: Features a five-digit LED display in °C or °F, plus a dark lid to protect light-sensitive reagents and help maintain temperature Godpfjxhfypox Aayobt Dimensions & build: Compact footprint (~190 mm × 240 mm × 225 mm), weighing ~3 kg, operating on 100–230 V AC, 50/60 Hz Performance notes: Achieves 4 °C within ~30 minutes at 20 °C ambient; reaching extremes like 0 °C or 40 °C may take hours, although pre-cooling inserts can accelerate that

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Gedpfxszbau Nj Aayjbt

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Gjdpozzlhasfx Aayobt Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: G0E 1075, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 12,000 rpm, controller model: Mitsubishi 64S, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 460 mm Spindle speed: 12,000 rpm Tool holder: BT40 Table size: 700 x 410 mm Maximum table load: 250 kg Number of tool magazine slots: 24 MACHINE DETAILS CNC control: Mitsubishi 64S Gbjdpfxszx Ahxe Aayot Coolant pressure: 20 bar Dimensions & Weight Machine dimensions (L x W x H): 1,880 x 3,550 x 2,790 mm Machine weight: 4,300 kg Operating hours: The seller estimates the operating hours to be approximately 20,000 hours. EQUIPMENT Spindle cooling Chip conveyor Extraction system Electronic handwheel Renishaw measuring probe Ethernet interface Approx. 100 tool holders including cabinet

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Gbedpfx Aaoyvrvpsyet Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: used, Year of construction: 2015, operating hours: 30,631 h, functionality: fully functional, machine/vehicle number: X658622, cooling capacity: 57 kW (77.50 HP), type of input current: three-phase, type of cooling: air, input voltage: 400 V, pressure: 44.5 bar, Equipment: type plate available, Chiller, Trane CGAM 020 model, with protective screen. Gbodpfx Aaszi Aacoyet

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Godpfx Aaszmvqvoysbt Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Year of construction: 2012, condition: used, functionality: fully functional, Reisner KWR-S 100 HK cooling system Water Temperature 12-16°C Cooling capacity 120kW Winter relief Technical data Chiller KWR-K 100 KS/ Compressor: Piston compressor Volume flow: 110 m³/h Refrigerant: R407c Speed: 1,450 rpm Cooling capacity: 112 kW Power consumption: 37 kW Coefficient of performance 3.5 (average) Evaporating temperature +7°C Condensation temperature 45°C Operating voltage 400 V-3 PH-50 Hz Cooling capacity (dry cooler) 150 kW Air inlet temperature 35°C Maximum air inlet temperature 45°C Air volume flow 45,600 m³/h Number of fans 4 Current draw per motor 7.2 A Power consumption per motor 0.9 kW (controlled) Operating voltage: 400 V-3 PH-50 Hz Sound pressure level 65.7 dB (A) at 10 m Gbjdpfxezh E Awo Aayjt Device length: 5,350 mm Device width: 1,123 mm Device height: 1,150 mm Empty weight: 418 kg

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Gbsdpfx Aasxz Ex Ssyot Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Feel free to contact us for more information!

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Gbsdpfx Aash Uyg Noyjt

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package Gbsdpozzdh Eefx Aayjt - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Gsdpfozcf Dlex Aayebt Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: as good as new (ex-display), single phase, 1950 kg, dust extraction, vacuum table with four individually controlled sections, water cooled 6kw 24000 rpm spindle, A2 hand held controller.spindle, Gsdpehh Anrofx Aaysbt

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Weight: approx. 168 kg Equipment: Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Godpfxozui T Hj Aayebt Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Dimensions of the unit: approx. 600 × 600 × 1450 mm Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.