Used Copy Milling for sale (10,312)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 240 mm, spindle speed (max.): 5,500 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 23 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, torque: 192 Nm, workpiece weight (max.): 30 kg, total height: 1,829 mm, total length: 4,066 mm, total width: 2,583 mm, collet bore: 73 mm, bar diameter (max.): 73 mm, swing diameter over cross slide: 290 mm, spindle nose: FL 140h5, overall weight: 4,300 kg, Equipment: documentation/manual, rotational speed infinitely variable, This DMG MORI CTX alpha 500 V5 from 2015 is in very neat condition and has 7,040 spindle hours on the clock. In 2020, the machine was fitted with a BMO automation, type Iridium Ir 25F, but has seen little production since then. PLEASE NOTE! The 2 panels with laser/motion sensor are not shown in the photo but are, of course, included. This CTX alpha 500 is equipped with: - BMO Iridium Ir25F automation (2020). - LNS Quick Load Servo III bar feeder (2016). Gedpfex Rqwhjx Abdjbg - Schunk Rota THW plus powered chuck with quick-change jaw system. - Various top jaws. - DMG CELOS software. - Chip conveyor. - Workpiece catcher/ejector. - Tool measurement arm. - Foot pedal for chuck clamping/unclamping. - Miscellaneous tooling (driven & static). - Original DMG documentation.

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams Gbodex S Rx Ispfx Abdjg • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: good (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW Gsdpfx Asx Sx Htebdjbg 2-speed spindle range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X-/Z-axis: 10/10 m/min Turret: Number of tool positions: 12 Driven tool positions: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC path control GRUNDIG EPL 2 with color monitor • Spindle orientation C-axis • 12-station turret, VDI 50, with 6 driven tools, SAUTER brand • Hydraulic 3-jaw chuck • Hydraulic tailstock • Chip conveyor • Extraction unit, LTA brand • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. Godjx Avr Sepfx Abdsbg - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: used, End mill, indexable insert milling cutter, hedgehog cutter, tool holder, milling holder, milling tool, cutter head -Handover: in its current condition as inspected -Cutting board: partially slightly damaged, see photos -Reversible plates: mostly missing, see photos -Type: 45-PP-160-140-10 Ø 160 mm 3 pieces -Type: 45-PP-125-113 Ø 125 mm 1 piece -Type: 45-PP-125-113-9 Ø 125 mm 1 piece -Type: 90-PP-100-22-8 Ø 100 mm 2 pieces -Type: 75-PP-080-37-6 Ø 80 mm 1 piece -Type: 75-PP-080-37 Ø 80 mm 1 piece -Dimensions: 395/295/H145 mm Gbsdpfx Abofvcxzodsg -Weight: 29 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine Gedpfx Abednca Njdobg -for sawing: edges on the front and back edges of the workpiece -1x: Motor Perske -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 volts -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm -Weight: 112 kg

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage Gbodpfxenzpx Rs Abdsg -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm Gedpfocx Ifisx Abdjbg -Weight: 1.8 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm Gbsdpfx Absb A Nmiodsg -Dimensions: 340/130/H220 mm -Weight: 20 kg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine Gbjdpfxjd Aqtue Abdog -Dovetail: 265 by 215 mm, 30 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 390/130/H260 mm -Weight: 30 kg

Condition: good (used), Universal milling head, milling chuck, milling extension, angle milling head, universal angle milling head, milling angle head -Manufacturer: TOS, Universal milling angle head from TOS FB25-V milling machine -Recording output: SK50 -Recording: Input gear -Milling head: fully swivelling -Stroke: 55 mm -Recess recording: mm Gjdpfogxqt Aex Abdjbg -Bolt circle: mm -Transport dimensions: 780/490/H430 mm -Weight: 224 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 Volts Gbodpfx Aob R Ua Esbdjg -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1100/600/H1330 mm -Weight: 340 kg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor, attachment holder -Milling holder: SK40 holder 3 pieces -Type: 40x22x25x40 / 40x32x25x60 -Shaft: Ø 32 / 30 / 22 mm -Price/Delivery: complete -Transport dimensions: 220/180/H60 mm Gjdpewaxlfofx Abdsbg -Weight: 4.6 kg/total

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling Gjdpfodx Aiwex Abdjbg -with: heavy dovetail guide -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/1100/H1330 mm -Weight: 608 kg

Condition: good (used), Tool holder, milling tool holder -Number: 8x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set Gjdpfjb Ecdpex Abdebg -Weight: 26 kg

Condition: good (used), Tool holder, milling tool holder -Number: 21x SK50 recording -various versions -Drill chucks, surface chucks, reducing sleeves, cutter heads, end mills, spindle tools Godpoc Innzjfx Abdobg -Price/Sale: complete -Weight: 82 kg

Condition: good (used), Tool holder, milling holder, milling tool, long milling arbor -8x recordings: SK50 -5x Diameter: Ø 22 x 500 mm Gsdpfx Aec Ih Tqobdsbg -2x Diameter: Ø 27 x 500 mm -1x Diameter: Ø 32 x 500 mm -Price/Sale: complete -Weight: 78.6 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg Gbjdpfx Aob A Nmaobdeg

Condition: good (used), tool holder, milling holder, milling tool, long milling mandrel, attachment holder -Milling holder: SK40 holder -Type: SK40 x 32 x 510 Gsdpfx Abovmxcrjdebg -Shaft: Ø 32 mm -Dimensions: Ø 75 x 670 mm -Weight: 7,4 kg

Condition: good (used), Tool holder, milling tool holder -Number: 13x SK50 recording -various versions Gjdpfsb E S I Sex Abdsbg -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Condition: good (used), Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 Gedpfx Ajc Sc Iksbdjbg -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

Condition: good (used), Collet holder, tool holder, tool holder, milling holder, milling tool -Milling holder: SK50 2 pieces -Type: different versions see photos -Milling tool holder: M16 Gedohupupepfx Abdebg -Price/delivery: complete -Total dimensions: 190/100/H260 mm -Total weight: 6.3 kg

Condition: good (used), Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz Gbsdpfeb A Invex Abdog -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm Gbjdpfxob A H T Is Abdsg -Tool: Ø 160 x 3.5 mm -Number: 3x motors available -Price: per piece -Dimensions: 200/85/H70 mm -Weight: 3.3 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: with guide -Engines: 2x Perske VS 40.09/2 -Power: 0.26 kW -Voltage 220/380 V 50 Hz -Speed: 2660 rpm -Quantity: 1x milling unit available Gjdovy Tucjpfx Abdsbg -Dimensions: 750/270/H300 mm -Weight: 40 kg