Used Copy Shaper for sale (688)

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: A4-10754, Used machine Overhauled and repainted by a specialist Electrical system reinstalled by a switchgear construction company 6-month parts warranty Features: + Stationary machine, very robust and stable design + Machine is started via an on/off lever, one-hand operation + with deactivation function, for square rolls + Cleaning mode activated electrically via a rocker switch Lodpfoivd Ezox Afworr + even division of the dough, excellent rounding of the dough pieces + new dividing knives made of stainless steel (instead of nickel-plated steel knives in a new machine!) + equipped with a new dough ring + Machine was completely disassembled, mechanically overhauled, and repainted + Electrical system reinstalled by a specialist company + Dividing knives precisely fitted into newly coated knife head + Gear parts run smoothly in an oil bath + Complete overhaul performed by a German specialist company, according to German quality standards + Only high-quality original parts are used + Final test with dough was carried out by our master baker and pastry chef STANDARD equipment: + incl. 3 kneading disks, new Optional special equipment (available at an extra cost): + Machine is fitted with a new frame, ideal for performing floor cleaning at the machine's location Additional cost: €1,485.00 net (including installation) Technical data: Number of pieces: 30 dough pieces Piece weight: 40 - 110 grams (depending on the dough) Dough input: 1,200 - 3,300 grams (depending on the dough) A higher dough input is possible with dough that has not yet been proofed Power: 1.6 kW Connection values: 400V - 3-phase - 50Hz Fuse: 16A-CEE plug Dimensions: 69 x 80 x 147 cm (W x D x H) Net weight: 540 kg

Condition: good (used), Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch Maximum pressure 8 bar Maximum load 8 kg Robot weight 51 kg + Controller consisting of the following components: Lrjdpehbhyuofx Afwer Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since multiple copies of this item are available and the robots use different tools, these are only sample images and may vary. Item condition: Used (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are plentiful. A total of 24,000 m² of production space is being demolished and sold. Please also check out our other offers. After purchase, the amount is due within 7 business days. You can find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2017, condition: good (used), Railway lahte HOESCH MFD - DRH 1400 N2D Lrodpfswb Aq Uox Afwsr MACH-ID 9089 Make: HOESCH MFD Type: DRH 1400 N2D Control: SIEMENS 840D Year: 2017 Doubled support carriage CNC controlled measuring and correction probe Chip conveyor internal and external clamping jaws (wheel clamp in and out) overhauling cost 850k EUR Under power free 02.2026 Rail track gauge: 1435mm Max. wheel tread Ø: 1600mm Min. wheel tread Ø: 200mm Max. axle length wheel set:2065mm Face plate Ø: 1400mm Number of slides: 2 Sjablone copy attachment: 2 Power: 55+55kW Length: 9200mm Width: 6800mm Height: 3800mm Weight: 47000kg

Year of construction: 1989, condition: good (used), machine/vehicle number: TH2000/9953, DEMAG KBK crane canopy crane runway with dimensions approx. 9x4m (4m bridge) There are multiple copies of this crane! Payload / lifting capacity 500 KG - 0.5 tonnes Technical data of the system: Crane runway made of Demag KBK2 rails Ledjv Iakaspfx Afworr System is delivered complete: KBK rails, rail connectors, chassis, end plates, brackets/hangers etc. Incl. 500Kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125KG - 1600KG Please enquire about your crane runway with load capacity and dimensions without obligation.

Condition: reconditioned (used), functionality: fully functional, total length: 580 mm, total width: 580 mm, total height: 1,350 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Dough divider and forming machine Fortuna bread roll press, size 3 Dough dividing head, newly revised Stainless steel knives, new Top model Robust technology Connection: 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Used machine, overhauled + SAB inspected with warranty Optional: Stainless steel platform New forming plate Service package Maintenance contract Lredpfxsw Hn H Ss Afwer Instruction and commissioning Delivery service Try our exclusive service, designed just for you!

Condition: reconditioned (used), functionality: fully functional, total length: 800 mm, total width: 720 mm, total height: 1,510 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Dough dividing and molding machine +++ Top-of-the-line roll press +++ Fortuna Automat, size 3+ Head cleaning system with electric rear movement Lrsdpew H H N Sjfx Afwjr Dough dividing head with stainless steel blade, NEW Robust technology Dough divider with 3 molding plates Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Options: Platform or trolley Molding plates Service package Maintenance contract Delivery service Spare parts box Training and commissioning

Condition: new, maximum load weight: 1,438 kg, overall weight: 1,800 kg, axle configuration: 1 axle, loading space length: 3,530 mm, loading space width: 1,840 mm, loading space height: 420 mm, total width: 2,400 mm, total height: 640 mm, Year of construction: 2025, TEMARED Car Transport Trailer Type Car Flat 3518 1,800 kg Gross Vehicle Weight, Payload up to 1,418 kg Shock absorbers for 100 km/h approval? Tilting platform, center area with phenolic resin-coated plywood insert Important Safety Notice Dear customers, We must point out that fraudsters are copying our vehicle listings from our official website and eBay Classifieds, and are offering them on other fraudulent websites at significantly lower prices. Please note: Our advertisements are valid exclusively on the official platforms of our website and eBay Classifieds. Any reposting or listing on other portals is a scam and serves fraudulent purposes. To protect our vehicles from misuse, we do not publish all detailed information in our advertisements. Full information is available only through direct contact with us. If you are seriously interested, we kindly ask you to contact us directly by email or telephone. Thank you for your understanding. Available immediately! Financing available! Delivery possible for an extra charge! Brand new trailer 2 years MOT on first registration, 2 years manufacturer's warranty Specifications: Hot-dip galvanized bolted steel frame Side wall height Steel loading ramps Central floor area covered with phenolic resin-coated plywood 4 pairs of recessed lashing eyes in the floor Tilting platform operated by gas strut Bolted, adjustable wheel chocks Maintenance-free rubber-sprung KNOTT axle 1,800 kg 195/50 R13C tyres on steel rims Shock absorbers for 100 km/h approval Plastic mudguards Hot-dip galvanized V-drawbar KNOTT overrun brake with reverse function, handbrake Jockey wheel 12V lighting system, 13-pin plug Multifunctional lighting Front position lights White/red marker lights at rear 2 wheel chocks with holder Registration documents (registration certificate, COC, 100 km/h manufacturer certificate) The above-mentioned equipment is included in the price. Dimensions: Loading area: 353 x 184 cm (LxW) Deck height: 42 cm Overall length: 548 cm Overall width: 240 cm Overall height: 64 cm Gross weight: 1,800 kg Unladen weight: 382 kg Payload: up to 1,418 kg (depending on equipment) Axle load: 1,800 kg Drawbar load: 100 kg Options Available: Spare wheel with holder + EUR 180.00 Lifting crank + EUR 90.00 Trailer available immediately. Financing on request! Delivery possible for an extra charge! Visit us or call us. Offer price incl. 19% VAT. Inspection Mon-Fri 09:00 - 17:00 Saturday 09:00 - 12:00 Offer and further information on request: Office Tel. Lrodoxcdlyopfx Afwor Subject to prior sale and errors. The provisions of the order confirmation or purchase contract alone are binding. Detailed specification and pricing are available from our sales staff. Please contact us. Please observe the legal regulations regarding weight and speed restrictions.

Condition: used, mileage: 520,000 km, power: 355 kW (482.67 HP), first registration: 09/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: beige, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), parking heater, DAF XF 480 FT 4x2 tractor unit with Grandner Denver Drum D9000 silo compressor, Euro 6, retarder, Super Space Cap cab with two sleeping berths, roof side spoiler, automatic transmission, power take-off, leaf air suspension, ACC adaptive cruise control, LDWS lane departure warning, collision warning, TPMS tire sensors, auxiliary air conditioning, auxiliary heating: seat ventilation/seat heating, xenon headlights, radio/AUX, single-door hatchback Ljdsxb Invepfx Afworr First owner Test book Multiple copies available 6 copies available

Condition: used, functionality: fully functional, 1 used: Universal Pantograph Engraving Machine • Model: Fridrich Deckel GK 12 Ljdpfx Ajxa Ap Ejfworr • Application: Fine engraving, copy milling, model making • Working area (workpiece): approx. 200 x 350 mm • Copy template area: approx. 320 x 450 mm • Enlargement/Reduction: 1:1.5 to 1:10 • Year of manufacture: unknown • Spindle motor: approx. 250W • Spindle speed: multiple stages, variable • Condition: used, tested, fully functional

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (max) mm 1 Panels thickness (min/max) mm 8 - 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Lredpfx Aom Udfwofwsr Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.378 (2 x Kw 4,5) Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) 04.1570 Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (N. 16 reels) Snipping (end-cutting) unit 08.42/30/B (2 x Kw 0,66 - Pneu 0° - 25°) 30 m/min Fine Trimming unit (Multi-profile, by N.C.) 08.0587 (2 x Kw 1) + Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (08.355 - 1 x Kw 0,5) 30 m/min Corner Rounding unit (Contour Trimming) 08.604 with 4 brushes (4 x Kw 0,25) Profile edge scraping unit (Multi-profile, by N.C.) 08.516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) + Buffing unit 08.617-4 (4 x Kw 0,18) Smoothing unit with spheres 08.53

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Ljdpfx Aeu Ix D Aefwerr Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc *

Condition: used, Year of construction: 1951, Technical details: turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm Lrjdpfx Asu Ix Hdjfwer range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: good (used), 172 USED Baguette maker, baguette machine. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Ljdpoxqg Aqofx Afwsrr bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, -Dimensions (LxWxH): 500x840x540 mm -Dough capacity: 50/280 kg -Dough portions: from 30 to 300 g -Voltage: 400 V -Power: 0.93 kW -Weight: 74 kg -Compact design, easy to use and clean. -Machine complies with CE standards. Ledexvxhiepfx Afwsrr -Portioning of dough from 30 to 300 grams. -Portioning error: +/- 5 g from desired weight. -Operates by dough extrusion using a spiral tool. -Equipped with two adjustment systems: sensor and cone. -Entire machine built from stainless steel and aluminum for robustness and easy cleaning. -All parts in contact with the product are removable via handy handwheels and are easily washable without requiring maintenance. -The outfeed hopper is easily removable for replacement of reduction sleeves. -All components are compliant with hygiene and safety standards. -Regular cleaning requires no special maintenance.

Condition: good (used), working length 900mm 3 additional knives copying hydraulic-electric control Lrjdpfxew Ady Ts Afwer motor power 4,6-5,5kW 2 longitudinal knives

Condition: excellent (used), -Dimensions: 962x1145x1392 mm -Belt dimensions: 735x3357 mm -Model: HF -Serial number: 19200246 -Year: 25/02/2019 -With controls on the right -Production output: 1800 pieces/hour -Dough weight -min/max: 50/1800 g Lsdpswx I Erefx Afwsrr -Dough strokes per minute min/max: 0/30 -Two laminating rollers -Voltage: 400V -Power: 0.37 kW -Weight: 172 k

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2022, Fortuna Automat A 4 E roll former Dough divider and rounding machine Roll former Fortuna Automat, size 4 E with rounding stop Head cleaning with electric motor with stainless steel knives Dough input 1200 to 3600 g with rounding disc Connection 400V, 16A-CEE plug Used machine Ledpfxoywadqs Afwerr

Condition: reconditioned (used), Fortuna A 3 automatic divider - divides into 30 portions - recently refurbished - 2 working trays - weight range 30-90 g - power supply 3 x 400 V - weight approx. 650 kg Lrsdszc Hwajpfx Afwsr - 6-month warranty - delivery time up to 7 days - collection from warehouse/shipping option available - price upon request

Condition: used, Year of construction: 2009, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Key Features: Lrjdpfxjzcv A Es Afwjr - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, Fortuna Bun Divider Rounder Semi-Automatic Dough Divider and Rounding Machine Fortuna Bun Press Semi-automatic, 30-portion Dividing head NEWLY overhauled Stainless steel knives NEW Lredpfeyunczjx Afwjr DGUV V3 safety inspection – only with us Connection: 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Refurbished used machine Options: Stainless steel platform New rounding plate Service package Maintenance contract Training & commissioning Delivery service Visit our large showroom!

Condition: used, Year of construction: 1980, turning diameter over bed 410 mm turning diameter over slide rest 220 mm Ledpfxjyt R Iws Afwsrr turning length 1000 mm centre height 205 mm spindle bore 46 mm spindle turning speed range 40 - 2000 U/min total power requirement 22,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 - Multifix tool post - Coolant system - Machine light - Chuck guard - Chip tray - Chip guard wall - Foot brake

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 0-261-04-6588, functionality: fully functional, power: 21 kW (28.55 HP), workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, total length: 6,060 mm, overall weight: 2,600 kg, The machine comes with the following configuration: Emulsion spray at both infeed and outfeed Edge pre-heating Pre-milling unit: Tool diameter: 100 mm, Tool height: 63 mm, diamond tool with replaceable knives, motorized adjustment for removal Glue application unit: Glue and hot air application, heated application roller, quick-change feature for the entire unit, automatic position adjustment via motor, 3 pressure rollers, edge feed speed: 14 m/min End trimming unit: Twin-motor unit with automatic tilt up to 15°, THK prism guide Radius milling unit: 2 tools, automatic 2-axis adjustment, automatic overlap adjustment Copying unit: 2 motors, automatic tool position change via servomotor, electromagnetic horizontal movement, vertically hydraulically damped movement Cleaning and polishing unit Automatic return conveyor: Homag TFU 140 TECHNICAL DETAILS Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,060 x 1,555 x 2,300 mm Weight: 2,600 kg Total connected load: 21 kW Compressed air: 6 bar Air consumption: approx. 350 l/min Lsdpfx Afjyu If Newerr Extraction: 2,820 m³/h EQUIPMENT Double top pressure for part stability Electronic thickness control Frequency converter for feed Automatic lubrication of feed chain Automatic motor calibration Touch control panel

Condition: reconditioned (used), Year of construction: 2004, warranty duration: 6 months, Automatic bun divider Mini Rex 4000 - used - year of manufacture 2004 - weight range 30-135 g - maximum output 4,000 pieces/hour - electronic control - power supply 3 x 400 V - recently refurbished - 6-month warranty - pick-up from warehouse / shipping option available - price on request Lrjdpfx Aozgr I Dofwsr

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) Ledpfx Afszcpixowsrr 2 x 4 kW, 9000 rpm - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: good (used), Year of construction: 1979, total height: 1,805 mm, total width: 1,700 mm, total length: 2,090 mm, sheet thickness steel (max.): 3 mm, working range: 960 mm, overall weight: 1,200 kg, Copy nibbling machine PIONIER K 1200/6, steel capacity 6 mm, circular nibbling up to Ø 500 mm, throat depth 1220 mm, throat height 200 mm, working length 960 mm, motor 1.3 / 2.2 kW, stroke 10 mm, dimensions 2090x1400x1800 mm, weight 1200 kg, operating manual Lredeyq Savspfx Afwsr