Used Counter Bracket for sale (3,666)

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160 For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft For wood shavings and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood shavings and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Also suitable for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip collection containers with clamping bracket and chip collection bag. System is fully assembled upon delivery, allowing for quick deployment. Mobile. Description of the filter: Ultra-compact with maximum filter area. Bwsdpocnw T Iefx Aiwow Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standardly tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a novel locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug 5-pin and phase reverser 2 swivel casters and 2 fixed casters with parking brake Manual cleaning Model: RLA 160 Article No.: 5131620 Technical data: Intake port diameter: 160 mm Nominal air flow: 1448 m³/h Max. air flow: 2400 m³/h Negative pressure at Vnenn: 2247 Pa Filter area: 9.21 m² Filter material: Dust class M Residual dust content: H3 (< 0.1 mg/m³) Filter cleaning: Compressed air supply: Chip collection volume: 2 x 193 l Supply voltage: 400 V Supply frequency: 50 Hz Motor power: 2.2 kW Sound pressure level max.: 73 dB(A) Dimensions (length x width x height): 1681 x 830 x 1654 mm Weight: 254 kg Location: Available from stock in 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Bedecnw U Dspfx Aiwoww Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2026, Feed unit with a consistent feed rate and no power loss Metal gearbox with hardened gears Metal cover for the feed rollers Right-hand and left-hand operation Powerful motor Bwjdpfx Aiscnxmzewow Durable PU feed rollers Tripod with extended outrigger arm as standard Individually adjustable for horizontal and vertical use With counter Model VSA 48 L Article no. 5115500 Technical data Max. outreach 1050 mm Number of feed rollers 4 Roller diameter 120 mm Roller width 60 mm Roller travel 25 mm Speed stages 8 Speeds 2/4/5.5/6.7/11/13/16.5/33 m/min Motor power 0.75 kW Connection 400 V / 50 Hz Weight 65 kg

Condition: used, INFICON Hydrogen Leak Detection System / Hydrogen Leak Detector INFICON Sensistor ISH2000 with TGF10 Tracer Gas Filler Complete system for professional hydrogen leak detection with AP57 search probe. For sale is a used hydrogen leak detection system from the manufacturer INFICON. The system consists of the Sensistor ISH2000 hydrogen leak detector, the TGF10 tracer gas filler for automatic evacuation and filling of test specimens, and an AP57 search probe for precise leak detection. The hydrogen trace gas method is suitable for the fast and precise leak testing of pipelines, heat exchangers, pressure vessels, refrigeration and air conditioning components, and industrial assemblies. Technical data Manufacturer: INFICON Type: Sensistor ISH2000 Article number: 590-750 Device type: Hydrogen leak detector Made in Sweden Bwsdpfx Ajzdggwsiwsw Supply voltage: 100 - 240 VAC Mains frequency: 50 / 60 Hz Display: LCD Printer port Probe control port APC system for controlling external components INFICON TGF10 Tracer Gas Filler Article number: 590-557 Connections: 4 x ISO G1/4" Manometer: -1 to +9 bar Trace gas pressure: 0 - 9 bar Compressed air supply: 4 - 8 bar Evacuation rate: 70 Nl/min Ultimate vacuum: -0.85 bar Filling rate: 600 Nl/min Dimensions: approx. 100 x 275 x 205 mm Weight: approx. 4.7 kg Functions Hydrogen leak detection with forming gas Automatic evacuation of test specimens Automatic filling with trace gas Leak detection with AP57 search probe Acoustic and visual leak indication APC-controlled test sequences Suitable for industrial use for series and individual tests Equipment INFICON Sensistor ISH2000 INFICON TGF10 Tracer Gas Filler INFICON AP57 Counter Flow Probe Connection cable Power cable Original packaging ISH2000 Original packaging TGF10 Accessories as shown in the pictures Application areas Industrial leak detection Leak testing Pipeline testing Heat exchanger testing Refrigeration and air conditioning technology Pressure vessel testing Automotive industry Manufacturing and testing systems Scope of delivery 1x INFICON Sensistor ISH2000 1x INFICON TGF10 Tracer Gas Filler 1x INFICON AP57 Search Probe 1x Cable set 1x Power cable Original packaging Accessories as shown in the pictures Condition Used Devices come from an industrial environment Optical condition as shown in the pictures Display is active Original packaging available Normal storage and signs of use The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping is possible. Subject to changes, errors and prior sale. We can gladly answer any further questions by phone.

Condition: used, Year of construction: 2011, rotational speed (max.): 375 rpm, Cold Rolling Machine Manufacturer: GROB-WERKE Type: C6 Year of manufacture: 2011 Control system: Siemens Sinumerik 840D sl Technical data: - Center height: 1,150 mm - Z-axis: 1,559 / 307 mm - X-axis: 16 – 80 mm Rolling spindle: - Swing diameter: 92 mm - Rolling spindle speeds: 0 – 3,000 rpm - Rolling roll clearance – axial: 0.025 mm - Feed rates (infinitely variable): 0 – 30,000 mm/min - Rapid traverse: 30,000 mm/min - Swivel angle range: ±3.2° - Max. speed – main spindle: 375 rpm Tailstock/Counter-support - Piston stroke: 400 mm - Piston diameter: 90 mm - Effective piston area: 63.6 cm² Bedozdk Ikspfx Aiwjww In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Process control with temperature monitoring and additional connections For sale is a used industrial control unit from the manufacturer STANGE Elektronik GmbH, Type SE-604, installed in an additional housing with various operating and connection components. Bsdez Nvk Hopfx Aiwoww The SE-604 combines industrial process control, multitasking PLC with CoDeSys, program management and plant visualization in one system. The offered device also includes a PMA temperature controller, an operating hour counter, several industrial connectors, and other operating and connection options. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Device type: Industrial control / Process control Display: 6.5 inch TFT-LCD Resolution: 640 × 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC Voltage supply SE-604: 24 V DC (18–36 V) Power consumption: typical 24 W Operating temperature: 0 to +50 °C Protection class SE-604: Front IP65 / Rear IP20 Dimensions SE-604 (W × H × D): 290 × 165 × 90 mm Weight SE-604: approx. 2.5 kg The specified dimensions and weight refer exclusively to the SE-604 control unit. The overall dimensions and total weight of the offered device with housing are unknown. Functions according to the manufacturer: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function Configurable plant visualization Web server / remote control Configurable user and operating levels Interfaces of the SE-604 according to the manufacturer: Ethernet 10/100 2 × USB 2.0 RS232 RS422 CAN Profibus DP optional Modbus optional Additional features of the offered device: PMA KS 10-1 economy temperature controller Temperature monitoring test chamber Müller operating hour counter Button "Heat disc" Button "Light" Front USB port Multi-pole industrial connectors Additional colored connection sockets Housing with side carrying handles Connection and linking cables as shown in the pictures The exact configuration and function of the additional connections are unknown. The mentioned control functions describe the technical possibilities of the SE-604 according to the manufacturer. The actually installed software and configuration of the offered device have not been checked. Application areas: Industrial and process plants Heat treatment plants Multi-purpose chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Test and experimental systems Spare part for compatible systems Scope of supply: 1 × STANGE SE-604 control system in housing 3 × Connection and linking cables as shown in the pictures 1 × Folder as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear Operating hour counter available The table shown in the pictures or other items not explicitly mentioned are not part of the sale. Shipping or forwarding shipping possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2019, Container No. G0123027 – Manufacturer: Kögel. * Sliding roof cover * Double corner brackets * Insert strip (wood) Bodpfx Aioz N Rcwswsww * Outline marking, side/rear * Load certificate, Code-XL * Multi-hole strip * Portal door with double rotating bar locks (inside) * Side sliding cover * Forklift-accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Used roof cover. Financing available upon request. Financing possible. Storage container, weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY. Multi-lock outer frame. Cover used. Technically ready for use, no further repairs required. Substructure with signs of use. Valid safety inspection certificate. Safety inspection documents available. Interchangeable container with lettering (see photos). LASI CODE XL!!! Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: good (used), mileage: 425,705 km, power: 360 kW (489.46 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,000 mm, total width: 2,550 mm, total height: 3,970 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, tachograph, traction control, = Additional Options and Accessories = - 2nd diesel tank - Heated mirrors - Digital tachograph - Fixed - LED lamp - Leather / fabric - Manual - Radio/cassette - Sleeper cab - Lane keeping assist - Auxiliary braking system = Notes = Number of axles: 2, Configuration: 4x2, Tare weight: 8514 kg, Gross vehicle weight: 21000 kg, Total fuel tank capacity: 1055 liters, 2nd diesel tank, Height of fifth wheel coupling: 122 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 12 tons, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Tachograph (driver's control unit), Digital tachograph, Air conditioning, Auxiliary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 360 kW (483 hp), Engine displacement: 12777 cc, Fuel: Diesel, Euro: 6, Transmission type: Optidriver, Gears: 12, Auxiliary braking system, Retarder brand: Voith, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat covering: Leather / fabric, Seat adjustment: Manual, HIGH 13LTR Retarder Lamp bracket Sun visor Skirts Auxiliary air conditioning Bumper color! = Additional Information = Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 4 mm; Tire tread depth right: 3 mm; Suspension: Leaf suspension Axle 2: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 4 mm; Tire tread depth left outside: 3 mm; Tire tread depth right inside: 2 mm; Tire tread depth right outside: 3 mm; Suspension: Air suspension Weights Tare weight: 8,514 kg Payload: 12,486 kg GVW: 21,000 kg Maintenance APK (Technical Inspection): valid until 12/2026 Condition Technical condition: good Optical condition: good Damages: none Bwedozwutwjpfx Aiwjw Number of keys: 2 Financial Information Leasing price: €1,045 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands, covering all years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 2011, functionality: fully functional, Shredder Höcker PHSS 40/110 Technical data: Manufacturer: Höcker Polytechnik Bwsdpfx Aszt Intoiwjw Type: PHSS 40/110 Year of manufacture: 2011 Drive power: 22 kW Working width: 1000 mm Rotor diameter: 400 mm Cutting principle: high-speed shredder shaft with counter comb Note: The machine is in good working order. It was inspected and tested by us in 28816 Stuhr. The video can be found on our website or YouTube channel. Inspections are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is ex works, without warranty.

Condition: ready for operation (used), Year of construction: 1998, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: Series 16-T, number of axes: 4, This 4-axis STAR MICRONICS SR20 was manufactured in 1998. It features a FANUC Series 16-T control unit and includes an IEMCA Bar Feeder for enhanced productivity. The machine is operational and in good condition, with occasional faults in the hydraulic system. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SR20 swiss type turning machine we have for sale. Contact us for further details. - Condition: Good condition / Under power - occasional faults in the hydraulic system - Control Unit: FANUC Series 16-T- Optional Accessories / Attachments: IEMCA Bar Feeder- Additional Components: Part catcher / Small conveyor belt, Coolant lines Technical Specification Counter Spindle No Bwjdpfx Aio Ad Ac Rjwsw

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loaded loading height approx. 940 mm, 20 x lashing eyes each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x stake pockets, central, 14 x stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in, Price: €1,500, surcharge for extendable drawbar Price: €1,500, surcharge for 4 x warning signs with lighting Price: €800, Also available with loading area length of 7,600 mm! -- Printing errors, mistakes, and changes reserved, sample images --, More data at:!, More details at:! Bsdpfxe Adphao Aiwjww

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm Bedpoy Aaxrefx Aiweww • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications due to pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily realized thanks to the rotatable drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Bedpfsyfta Tox Aiweww Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching is then done pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be placed on the table at the front and rear 2 swivel workpiece supports 2 side stops, also usable as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swivel elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: used, mileage: 49,990 km, power: 77 kW (104.69 HP), first registration: 10/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat now via WhatsApp: Quick and easy contact with our sales consultant. Internal ID number: [3562]---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options also without a down payment * Trade-in of your vehicle, whether old or new Bwjdpfxe Ad Tw So Aiwsw Optionally bookable: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery---- Summer offer: If desired and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: German vehicle Regularly serviced Immediately ready for use Accident-free Euro 6 standard High roof + long wheelbase Air conditioning Rear view camera Comfort driver's seat Bluetooth multimedia function Special equipment: 2nd battery, trailer stabilization program (TSA), audio system: radio/CD player with multi-function display, audio/radio remote control on the steering wheel, mobile phone/cell phone preparation with Bluetooth/USB interface, AUX-IN connection, USB interface, window in sliding door right, fixed, rear wing doors with glazing (opening angle 180 degrees), heated rear window, grille for rear window, rear window wiper, cold start package, cargo area light LED, cargo area partition behind driver/passenger with window, tire repair kit, visibility package 1, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, auxiliary heating Additional equipment: 3rd brake light, storage compartment in the headliner of the driver's cab, airbag driver side, traction control system (ASR), turn signal integrated in exterior mirror, on-board computer, headlining in passenger compartment, rev counter, electronic brake force distribution (EBD), electronic differential lock (EDS), generator 165 A, grab handle B-pillar, heating with recirculation, body/structure: box van high roof standard, body version: medium high roof, steering column (steering wheel) adjustable in height/length, headlight range control, truck registration, engine 2.0 L - 77 kW TDCi CAT, production plant: Otosan, wheelbase 3750 mm, low emission according to emissions standard Euro 6, sliding door loading/passenger compartment right, wide side protection strips, seat package 4: driver's seat (4-way adjustable) - passenger double seat, fabric, seat cover/upholstery: fabric, seats in driver's cab: driver's seat adjustable in height, seats in driver's cab: passenger double seat, folding table integrated in passenger double seat, storage compartments under seat bench, seats in loading/passenger compartment: 1st row, 3-seater bench, steel rims 6.5x16, bumper partially painted, step at the rear integrated, tinted glass, lining in loading/passenger compartment: half height ---- Would you like to lease or finance? We offer attractive offers - even without a down payment! Please do not hesitate to contact us. Contact: Phone: WhatsApp: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 AM - 6:00 PM Sat: 9:00 AM - 2:00 PM All information on the Internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or by written assurances.

Condition: ready for operation (used), Year of construction: 1973, travel distance X-axis: 850 mm, travel distance Z-axis: 2,900 mm, controller manufacturer: SIEMENS, number of axes: 2, Turn-mill centre manufactured in 1973. This MAX MULLER 3000 / Norma 2900 x 850 features a turning length between centers of approximately 2850 mm and a faceplate diameter of Ø 630 mm. It is equipped with a SIEMENS CNC Control and has a drive power of 32 kW. If you are looking to get high-quality turning capabilities, consider the MAX MULLER 3000 / Norma 2900 x 850 machine we have for sale. Contact us for further details. - Turning Length between Centers: Approx. 2850 mm- Faceplate Diameter: Ø 630 mm- Drive Power: 32 kW- Operating Hours: Approx. 60,000h - 70,000h (mathematically calculated after 1998 retrofit)- Control Unit: SIEMENS CNC Control- Additional Accessories / Scope of Delivery: Complete machine, 1x hydraulic steady rest (Ø 50 mm - Ø 150 mm), faceplate Technical Specification Counter Spindle No Bwjdpfx Aj Adp Tvsiwjw Driven Tools Yes

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis - New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. Bjdpfx Aey Hm Eyeiwsww ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel plate with sliding mechanism and self-lubricating features (Type Jost JSK), mounted on the subframe ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Body: Crane interchangeable system: The body including the crane can be disassembled, and a fifth wheel plate is then mounted on the chassis. The function of the crane and body including the fifth wheel plate is also possible. The vehicle has a total of two fifth wheel plates, each of which can be moved longitudinally. A crawler track would also be available, net price is €149,900. ? Assembly/bolting of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed body as a steel/welded construction, removable ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed body painted. Color: RAL (chassis color) ? Removable aluminum side boards, manufacturer Suer, height 600 mm, anodized design with steps, removable stake pockets. ? Standard flatbed floor with welded 4 mm steel tread plate, painted in RAL (chassis color) ? 6 recessed lashing points 2500 daN each side, in slot profile with flexible arrangement. ? 4 x lashing points for chains 6500 daN (2x front and 2x rear on the body) ? Sturdy front wall consisting of a welded frame, welded 4mm steel sheet and 5 accessory hooks, front wall height approx. 1300 mm, steel design, painted, with 2 foldable eyelets for lashing straps, welded on. ? Cladding sheets, fenders made of aluminum tread plate (sandblasted, powder-coated and painted) ? Multifix stake pocket, 2 rows with a distance from the front and rear of approx. 80 cm. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection device at the rear and on the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow connections, at the front for semi-trailers and also at the rear for trailers. ? New crane, type FASSI F545 RA 2.27 with continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hyd. extensions. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI loading cranes. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating manual, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front wall ? 2 x rotating beacons on the FH roof ? 2 x FLASH lights in the bonnet ? 2 x LED under the body at the rear, each on the left and right, arrangement to be agreed. ? 4 x LED AS, 2x on the left and 2x on the right under the body in the area of the support legs, mounted. ? 4 x yellow LED light strips, 1x mounted on each support. Further information is available upon request.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 3,800 mm, loading space width: 2,470 mm, Year of construction: 2024, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, Chassis – New Vehicle: - MODEL 2024 ? Manufacturer/Type: Volvo FH500 6x2, wheelbase 3700 mm, VIN: To be provided. ? Please refer to the attached documents for detailed vehicle specifications. ? Oil pump type: LEDUC ? Fifth wheel with sliding mechanism and self-lubricating (Type Jost JSK), mounted on the auxiliary frame ? Front outrigger cover with company LOGO (laser-cut/smooth steel sheet) Superstructure: Crane exchange system: The superstructure including the crane can be removed, and a fifth wheel is then mounted on the chassis. The crane and superstructure, including the fifth wheel, can also be used together. The vehicle has a total of two fifth wheels, each of which can be moved longitudinally. A crawler would also be available, net price is €149,900. ? Mounting/bolting of the crane and main support beam to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting location: Front ? Flatbed design as a removable steel/welded structure ? Length approx. 380 cm, width approx. 248 cm. ? Flatbed painted. Color: RAL (chassis color) ? Removable aluminum side panels, manufacturer Suer, height 600 mm, anodized version with steps, removable Kinngripp stanchions. ? Standard flatbed floor with welded 4 mm steel diamond plate, painted in RAL (chassis color) ? 6 recessed lashing eyes 2500 daN each side, in slot profile with flexible arrangement. ? 4 lashing brackets for chains 6500 daN (2 at the front and 2 at the rear of the superstructure) ? Sturdy front panel consisting of a welded frame, welded 4 mm steel sheet and 5 accessory hooks, front panel height approx. 1300 mm, steel version painted, with 2 foldable loops for lashing straps, welded. ? Sheathing panels, mudguards made of aluminum diamond plate (sandblasted, powder-coated and painted) ? Multifix stanchion pockets, 2 rows, spaced approx. 80 cm from the front and rear. ? Brackets (for support plates, crane plates) made of galvanized steel. ? Additional support mounted under the chassis. ? Mounting of an underrun protection at the rear and the additional support, with installation of hydraulic and electrical connections. ? Duomatic and red/yellow couplings, at the front for semi-trailers and at the rear for trailers Bwedpoy Hm Etjfx Aiwsw ? New crane, type FASSI F545 RA 2.27 endlessly rotating, fully mounted, installed and parameterized, with 7 hydraulic outriggers and JIB L214 with 4 hydraulic outriggers. ? Please refer to the attached documents for detailed crane specifications. ? Series 5450 ? The initial TÜV-UVV inspection and parameterization of the crane will be carried out in accordance with the technical specifications and load charts of FASSI crane manufacturer. Additional equipment and crane accessories: ? 5 x crane support plates with brackets, arrangement according to the manufacturing drawing. ? AWC (automatic rope length control) ? Operating instructions, maintenance manual and crane inspection book. Lighting: ? 2 x LED AS integrated in the front panel ? 2 x rotating beacons on the FH roof ? 2 x flashing lights in the hood ? 2 x LED under the superstructure at the rear, one on each side, arrangement to be agreed. ? 4 x LED AS, 2 on the left and 2 on the right, mounted under the superstructure in the area of the support legs. ? 4 x yellow LED light strips, one mounted on each support. Further information is available on request.

Condition: used, Folding machines Stahl T 52.3/4-T-F Falzmaschine - Folding machines Stahl T 52.3/4-T-F Year 1995- Serial-No. 69024/95-231703 Flat pile feeder - TREMAT 1.Folding unit 4 buckles 2.Folding unit 4 buckles Gateway buckles Counter Anti noise hoods Stream delivery include Kompressor Bwjdpfo Af Am Eex Aiwjw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, mileage: 105,815 km, power: 125 kW (169.95 HP), first registration: 08/2018, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M629----RENAULT MASTER BOX VAN 2.3 DCI BOX VAN L3 H3----KM: 105,815, SERVICED ACCORDING TO MAINTENANCE SCHEDULE----LAST INSPECTION WITH OIL CHANGE AT 103,313 KM----LIKE-NEW M+S TIRES----* CRUISE CONTROL * SPEED LIMITER * ECO BUTTON * REARVIEW CAMERA * PARKING ASSISTANCE (PDC) REAR * TRACTION CONTROL * AIR CONDITIONING * EMERGENCY BRAKE ASSIST * START/STOP ----270° REAR DOORS----SUSPENSION SEAT----3 SEATS----* MULTIFUNCTION STEERING WHEEL * ELECTRIC DOOR MIRRORS * ELECTRIC WINDOWS * WOODEN FLOOR WITH 12X EYELETS * ALUMINUM WALLS * LASHING RAILS * START/STOP * STORAGE COMPARTMENT IN THE ROOF AREA * CENTRAL LOCKING WITH REMOTE CONTROL * BLUETOOTH HANDS-FREE SYSTEM * USB * ON-BOARD COMPUTER * ARMREST * WITHOUT SLIDING DOOR * STORAGE COMPARTMENT IN THE CAB * PASSENGER SEAT CAN BE FOLDED DOWN AS A TABLE ----Special equipment: * Storage Package * Storage compartment (closed) centrally in the dashboard * Seats in the cab: Double passenger seat multifunctional with storage compartment * Storage compartment with footwell lighting * Clipboard on the dashboard Bwsdpfezp Tw Eox Aiwjw * Speed limiter system * Rear tailgate doors (opening angle 270 degrees) * Interior trim, cargo area partition * Glove compartment with cooling function * Comfort Plus Package * On-board computer * Parking assistance rear * Seats in the cab: Lumbar support for the driver's seat * Metallic paint * Wheel covers * Spare wheel in driving condition * Seats in the cab: Driver's seat mechanically sprung Additional equipment: * Storage gallery * Airbag driver side * Exterior mirror electrically adjustable and heated * Outside temperature display * Side marker lights * Rev counter * Electronic brake force distribution * Anti-slip regulation (ASR) * Interior filter: Pollen filter * Body/structure: Box van, high roof, standard * Fuel tank: 105 liters * Cargo area partition * Steering column (steering wheel) height adjustable * Model update * Engine 2.3 Ltr. 125 kW dCi Diesel FAP Energy CAT * Wheelbase 4332 mm * Smoker's package * Low emission according to emissions standard Euro 6 * Gear shift indicator * Sliding door loading/passenger compartment right * Mud flaps front * Side protection strips * Seat cover / upholstery: Fabric * Seats in the cab: Driver's seat height adjustable * Start/Stop system engine * Lashing eyes cargo area floor * Heat-insulating glazing * Permissible total weight 3.50 t ----If desired, we can equip the vehicle with a trailer hitch. Professional installation - quick and reliable, starting from 599 € +++ Exclusive offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus - your advantage for changing vehicles! (only applies to commercial vehicles) +++ Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you can maximize the value of your vehicle and benefit from purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailor-made financing options, adapted to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will accompany you from the initial consultation to the vehicle handover. 4. Our additional services: In addition to the vehicle purchase, we offer exclusive services for a smooth process: * Worldwide vehicle sales: Support with purchase and export, wherever you are. * Transfer plates

Condition: good (used), Year of construction: 2009, bore capacity in steel (diameter) 40.0 mm thread cutting attachment M 30 spindle taper MT 4 MK table surface area 1200 x 500 mm turning speeds 50 - 2000 U/min arm length 1050 mm column diameter 220 mm spindle stroke - max. 200 mm feed range 0.08 - 0.50 mm/U distance spindle /table 760 mm weight 2740 kg range L-W-H 2450 x 2450 x 2800 mm Original price approx. 20.000 Euros Special price on request Equipment: Bjdpfx Aioz R D Iceweww - Robust electro-hydraulic radial drilling machine - Sturdy construction ensures vibration-free operation - Compact design with electro-hydraulic quick-clamping system - Infinitely variable speed adjustment (50–316 + 316–2000 rpm) - Digital speed display - Motorized height adjustment of the drill head - Drill head swivels 180° - Arm movable forwards/backwards and swivels horizontally - Clockwise/counter-clockwise spindle rotation - Manual & automatic spindle feed - Large work table with 3 T-slots - 1x heavy-duty machine vice * STANKO IMPORT "200-0225C" * Jaw width: 250 mm * Jaw height: 60.0 mm * Opening width: approx. 300 mm - Thread-cutting attachment - Separate coolant system - Front-mounted emergency stop button - T-slots for mounting on the side and rear of the machine - Operating manual

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. Bode Aa A Eqjpfx Aiwsww 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: like new (used), functionality: fully functional, A very nice booklet maker is for sale. Brand: Plockmatic, type BM 200 (BK5010) Bwedpfx Aijz Sqdajwew Equipped with folding, stitching, trimming, and square folding functions, as well as automatic format setting. Low counter reading. This machine is in very good condition and is 100% operational. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (within the Netherlands). Regards, Henk Hoos.

Condition: used, empty load weight: 8,786 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2023, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,700 mm, loading space volume: 89 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2023, Equipment: ABS, Unladen weight: 8786 kg, Permissible total weight: 38000 kg, Cargo space (L W H): 13,403 mm x 2,460 mm x 2,700 mm, Tire size: 385/65 R22.5, Cargo space volume: 89 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Anti-jackknife device, Front liftable axle, Pallet box, Electronic Braking System (EBS), Fire extinguisher holder, Spare wheel holder (2x), Bolted chassis, Container doors, Temperature recorder, Axle mileage counter, 1x15 and 2x7 pin connection socket, Anti-splash guard, International customs seals, Aluminum rims. You can find an overview of all our available vehicles on our website. Do you need financing? We offer customized financing options, as well as full-service or telematics services. We will be happy to advise you personally. Bwjdpfx Aisz Sv T Howow

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 10,000 rpm, travel distance X-axis: 108 mm, travel distance Y-axis: 104 mm, travel distance Z-axis: 140 mm, spindle motor power: 3,700 W, total height: 1,597 mm, total width: 837 mm, overall weight: 1,150 kg, controller manufacturer: FANUC, product length (max.): 1,622 mm, number of axes: 4, This 4-axis Citizen Cincom B16 was manufactured in 2013. It features a maximum machining diameter of Ø16 mm and a maximum machining length of 135 mm. The machine includes a main spindle speed range of 200–10,000 rpm and a counter spindle with a maximum chucking diameter of Ø16 mm. If you are looking to get high-quality turning capabilities, consider the Citizen Cincom B16 horizontal turning machine we have for sale. Contact us for further details. Machining capacity • Maximum machining diameter: Ø16 mm • Maximum machining length: 135 mm • Main spindle through-hole diameter: Ø20 mm • Maximum front drilling diameter: Ø6 mm • Maximum front tapping: M6Travels • A2/back-spindle axis travel: 200 mmRapid feeds • X-axis: 21 m/min • Y-axis: 21 m/min • Z-axis: 15 m/min • A2-axis: 15 m/minMain spindle • Speed range: 200–10,000 rpm • Maximum speed with rotary guide bushing: 8,000 rpm • Motor: 2.2 / 3.7 kWCounter spindle (back spindle) • Maximum chucking diameter: Ø16 mm • Speed range: 100–6,000 rpm • Maximum drilling diameter: Ø5 mm • Maximum tapping: M3 • Motor power: 1.0 kWDriven tooling • Maximum drilling diameter: Ø5 mm • Maximum tapping: M4 • Tool spindle speed: 100–4,500 rpm • Drive motor: 0.5 kWTooling • Total mountable tools: 15 • Cutting tools: 5 • Secondary machining tools: 2 • Front drilling tools: 4 Bodpfs Afxqqjx Aiweww • Back drilling tools: 4General • Input power capacity: 5.2 kVAUnits available and hours • Unit 1 • Manufacture date: 05/2013 • Power On: approx. 82,600 h • Run Time: approx. 31,847 h • Cutting Time: approx. 22,613 h • Unit 2 • Manufacture date: 06/2013 • Power On: approx. 81,474 h • Run Time: approx. 31,403 h • Cutting Time: approx. 20,127 h Additional equipment • Bar feeder: FMB Minimag 20 / 3200 C • Unit 1 bar feeder year: 2014 • Unit 2 bar feeder year: 2013 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2023, 19-meter AR Racking pallet rack AR Racking pallet rack with a total length of 19,000 mm, consisting of one base bay and six extension bays (2,700 mm each). Each bay has three levels (including floor storage space) with four cross beams (2,700 mm). Each bay can store 3 Euro pallets side by side and 3 pallets stacked (including floor storage space). One bay can accommodate 9 Euro pallets. Manufacturer: AR Racking Type: ARPA-S Total length: approx. 19,000 mm Shelf height: 3,000 mm Shelf depth: 1,100 mm Clear bay width: 2,700 mm Grid spacing: 50 mm End upright frame height: 500 mm Number of storage levels: 3 (including floor storage space) Number of bays: 7 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 63 Year of construction: 2023 Uprights The frames consist of two omega profiles with their corresponding connectors, post feet, and fastening materials. The horizontal and diagonal struts are made of galvanized C-profiles. The perforation The omega profile has a 50 mm spacing for the crossbeams. Sendzimier-galvanized material Crossbeams Made of cold-rolled box profile Sturdy suspension bracket for a secure connection Including two locking pins per crossbeam to prevent accidental removal Powder-coated orange Scope of delivery: 6 x AR Racking pallet rack uprights, galvanized, 3000 x 80 x 70 mm Bwodpfx Aoxq A Dwsiwsw 2 x AR Racking pallet rack uprights, galvanized, 3500 x 80 x 70 mm (end upright frame height: 500 mm) 28 x AR Racking pallet rack crossbeams, orange, 2700 x 160 x 50 mm 56 x Locking pins We also offer the shelf in a smaller version. Please feel free to contact us. You can find more items - new and used - in our shop! International shipping costs upon request!