Used Counter for sale (2,504)

Condition: like new (used), Year of construction: 2019, operating hours: 7,300 h, machine/vehicle number: IntNr231648, For sale is a very well-maintained TORNOS Swiss GT 13-8 CNC Swiss-type automatic lathe, manufactured in 2019, with only approximately 7,300 operating hours. Technical data – TORNOS Swiss GT 13-8 Manufacturer: TORNOS Model: Swiss GT 13-8 Machine type: CNC Swiss-type automatic lathe Year of manufacture: 2019 Control system: FANUC 31i-B Number of CNC axes: 8 Number of spindles: 2 Operating hours: approx. 7,300 h Condition: very good Main spindle Max. bar diameter: 13 mm Max. machining length: approx. 190 mm Max. spindle speed: 15,000 min⁻¹ Spindle drive power: approx. 4 kW C-axis Counter spindle Max. machining/clamping diameter: 13 mm Max. speed: 15,000 min⁻¹ Drive power: approx. 4 kW C-axis resolution: 0.001° Tool turret 1 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Gksdpe Ahq S Hjfx Akhod Tool turret 2 8 tool positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 1 kW Front machining up to 4 tool positions Rear/opposite-side machining Up to 8 tool positions Of which up to 4 are driven positions Speed of driven tools: up to 6,000 min⁻¹ Drive power: approx. 0.75 kW Tool holder package is charged separately! TORNOS Robobar SBF 213 bar feeder High-pressure coolant system, type: HP-20-140 Kraft & Bauer fire extinguishing system ELBARON oil mist separator Supply voltage: 400 V The machine can be inspected while powered on by prior arrangement. Subject to changes, errors and prior sale!

Condition: used, Year of construction: 2005, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Onetouch IGF-M-D greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 Gjdpjz Ig Swofx Akhskd rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm Soper solid CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets with a maximum of 24 positions for rotary toolholders. A comprehensive package of toolholders comes with the machine. An Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 5 identical machines available, all in very good and well maintained condition. *

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. Gsdjzgh Tvjpfx Akhskd The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, spindle motor power: 3,700 W, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, bar passage: 20 mm, bar diameter (max.): 20 mm, Equipment: rotational speed infinitely variable, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Travel Z1 [mm]: 205, long turning mode Travel Z1 [mm]: 55, short turning mode Type of collet: 145E Synchronously rotating guide bushing unit Type of guide bushing: T223 Godpfe Ahy Tzox Akhekd TAILSTOCK Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 Maximum turning diameter [mm]: 20 Max. part length, eject forward [mm]: 80, Option 120 C-axis with 0.001° Travel Z2 [mm]: 255 Type of collet: 145E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling unit: - Number: 4 modular, driven drilling/milling spindles (Tools 4 x ER16) - Manual B-axis 3 x ER 16 - Power: [kW]: 2.5 (S6000) - Swiveling range 90° (0° ~ 90°) Cross slide, tailstock - Number: 3 fixed drilling stations ER16 Rear-end machining with Y2 axis, travel 60 mm - Tool carrier for 8 tools - 4 modular, driven drilling/milling spindles ER11 - 4 fixed drilling stations Ø 19.05 mm AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Connected load [kVA]: 15 CONTROL Control type: Fanuc 32iB Plus Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External operating panel with handwheel 10.4" color monitor LCD/MDI Automatic shutdown function PowerOff Program check function (test run via handwheel possible) Continuous threading cycle Running time display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder Interface for JBS Weight 2.95 tons ACCESSORIES Alignment feet with leveling elements Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating instructions including parameter list and test report)

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Gksdpfx Akoyx U N Djhsd Please contact us for further information. Price on request!

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,200 kg, Equipment: documentation/manual, # TAKAMAZ SX-07 CNC lathe with FMB bar feeder – manufactured in 2002 For sale is a CNC lathe from the Japanese manufacturer TAKAMAZ, model SX-07, manufactured in 2002. The machine was fully functional until it was decommissioned and was subsequently professionally dismantled and stored. The complete system will be sold including the bar feeder magazine, chip conveyor, extraction system, and accessories. ## Technical data - Manufacturer: TAKAMAZ / Takamatsu Machinery - Model: SX-07 - Year of manufacture: 2002 - Control: FANUC Series 21i-T - Serial number: 940011 Gedpfe Ah Eitjx Akhekd - Machine weight: 2,200 kg according to the nameplate - Tool turret - Main and counter spindle ## Operating data according to the control system - Control system switched on: 95,815 hours - Feed time: 23,599 hours - Total part counter: 8,324,144 pieces ## Equipment - FMB Turbo 3-26 bar feeder magazine (year of manufacture unknown) - Chip conveyor - Extraction system - Various tool holders and accessories as shown in the pictures - Operating manual available ## Condition and inspection The machine was fully functional until it was dismantled. It has already been dismantled and stored, but can be powered up for inspection. A complete machining demonstration cannot be guaranteed in the stored condition. Inspection is possible after prior appointment. Sale from warehouse. Loading and transport by arrangement.

Condition: used, mileage: 74,053 km, power: 375 kW (509.86 HP), first registration: 11/2015, overall weight: 35,000 kg, fuel type: diesel, color: white, axle configuration: 8x2, maximum load weight: 11,625 kg, empty load weight: 23,375 kg, tire size: 385/55/315/70 R 22,5, next inspection (TÜV): 11/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 16 m³, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, power assisted steering, seat heater, Vehicle location: Bovenden, with house, 1 comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, lift and lower function, differential lock, work lights, rotating beacon, storage compartment, leaf-air suspension, connections for air and light for trailer hitch, last axle hydraulically steered, sunroof, remote control, green environmental badge. Wheelbase: 4500 mm, Body: Wiedemann Super 2000 body, Capacity (sludge), 6,000 l (service water), 16,000 l (total), with water recovery, radio remote control 9t/7.5 tons front axles, disc brakes on front and rear axles, vacuum pump type: KW 4000, renewed in 2023 (1801), Aerokill system, hydraulic winch (350 kg) & rescue eye, meter counter for hose lengths, reversing camera, access ladder, filterless water treatment (sedimentation/centrifugal principle), stainless steel water tank (V2A, multi-chamber system) and an integrated fresh water system (approx. 800 - 1,000 l), high-pressure pump: Uraca P4-45-70, (1.025), large HD hose reel: approx. 180 m high-pressure hose DN38, a small HD hose reel: approx. 70 m high-pressure hose DN13, and a DUO coupling for power reduction, external transfer pump (rotary lobe pump Jurop VL14) for work with large water volumes. Pump output: 1,400 l/min, 2 bar, 7 kW, wardrobe with heater, hand washing basin (hot/cold). ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Gkedpfx Akjzbvdaehod

Condition: new, Year of construction: 2022, Working width: 630 mm Planing height: 300 mm Planing shaft: Tersa Number of knives: 4 Height adjustment: electric display planing thickness: mech. counter Feed speed: 5 / 8 / 12 / 18 Feed roller: steel Gkedpjl D Rxbsfx Akhod Pressure beam: jointed Extraction roller: Rubber table rollers: no Engine power: 9 kW suction connection: 150mm Machine length: 1200mm Machine width: 1200mm Weight: 810 kg

Condition: used, STANGE Elektronik GmbH Industrial Control / Process Control SE-604 Automation solution with CoDeSys multitasking PLC For sale is a used industrial control system from the manufacturer STANGE Elektronik GmbH. The SE-604 is a powerful control and visualization solution for industrial process and heat treatment systems. Control, PLC, program management, and system visualization are combined in one system. Technical data: Manufacturer: STANGE Elektronik GmbH Type: SE-604 Display: 6.5 inch TFT-LCD Resolution: 640 x 480 pixels Operation: Membrane keypad, 34 keys Processor: Pentium-based 32-bit processor Working memory: 256 MB DRAM Program memory: CompactFlash ≥ 256 MB Operating system: WindRiver VxWorks PLC: IEC 61131 CoDeSys multitasking soft PLC SE-604 power supply: 24 V DC (18–36 V) Power consumption: typically 24 W Operating temperature: 0 to +50 °C Protection class: Front IP65 / Rear IP20 Dimensions SE-604 (W x H x D): 290 x 165 x 90 mm Weight SE-604: approx. 2.5 kg Functions: Up to 50 control zones Up to 250 programs / recipes Up to 500 alarms with alarm history Program generator for up to 50 setpoints and 64 control tracks PID control with self-optimization function System visualization Web server / remote control Configurable user and operating levels Interfaces: Ethernet 10/100 2 x USB 2.0 RS232 RS422 CAN Modbus Profibus DP optional Application areas: Industrial and process plants Heat treatment systems Universal chamber furnaces Nitriding furnaces Hearth car furnaces Autoclaves Climate chambers Gedpfxsz Nvkyo Akhjkd Scope of delivery: STANGE SE-604 control system in housing Connection and cable set as shown in the pictures Condition: Used Optical condition as shown in the pictures Operating hour counter available The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr231574, Machine Specifications Control: MORI SEIKI MSX-850 Design: Slant-bed turning center Version: SY with Y-axis Turret: 12-position with driven tools Working Area Max. turning diameter: 356 mm Standard turning diameter: 275 mm Max. turning length: 705 mm Traverse Travels X-axis: 260 mm Y-axis: ±50 mm / total approx. 100 mm Z-axis: approx. 795 mm Rapid traverse X/Y/Z: 30 m/min Gsdpfx Ake Ah Rvhohekd Counter spindle LNS Quick Load Servo 2 bar feeder Max. bar length: approx. 1,500–1,600 mm / 63" The machine can be inspected under power by appointment. Specifications and technical details are subject to change and error. Prior sale reserved.

Condition: used, Year of construction: 2012, turning length: 800 mm, turning diameter: 300 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 4,000 rpm, total height: 2,200 mm, total length: 5 mm, total width: 3 mm, overall weight: 6,130 kg, Equipment: documentation/manual, DMG GILDEMEISTER CTX beta 800 BigBore – Counter Spindle – VDI 40 – Extensive Tool Package – Year of Manufacture 2012 For sale is a CNC turning and milling center, DMG GILDEMEISTER CTX beta 800 BigBore, year of manufacture 2012, with a main spindle and counter spindle, as well as extensive tooling. The machine is offered together with a large tool cabinet, numerous VDI-40 tool holders, driven tools, and an extensive assortment of chuck jaws for both turning centers. Technical Data Manufacturer: DMG GILDEMEISTER Type: CTX beta 800 BigBore Gkjdj Ai A Uhjpfx Akhed Year of Manufacture: 2012 Serial Number: 00410010291 Machine Type: CNC turning and milling center Main Spindle: max. 4,000 RPM Driven Tools: max. 5,000 RPM Tool Holder: VDI 40 Connection Power: 65 kVA Operating Voltage: 400 V / 50 Hz Machine Weight according to Nameplate: 6,130 kg Country of Manufacture: Germany Machine Equipment Main spindle with three-jaw chuck Counter spindle with three-jaw chuck Tool turret Driven tool holders Coolant system CNC control panel Machine enclosure with work area Technical Documentation Extensive tool package included The offer includes a large, multi-story tool cabinet with numerous tool holders and accessories. Included, as shown in the photos and according to the final inventory, are: VDI-40 turning tool holders Several driven tool holders, axial and radial Drilling and milling tool holders Internal machining tools Boring tools and boring bars Various drilling and milling tools Extensive sets of chuck jaws for main and counter spindles Additional clamping and collet chucks Tool adapters and clamping accessories Other tool holders and accessories Tool cabinet for storage Condition Used machine with typical signs of wear and tear consistent with use. The current technical operational condition will be confirmed during an inspection or functional test. An inspection and functional demonstration can be arranged upon prior agreement, provided the machine is connected and ready for operation. Scope of Supply DMG GILDEMEISTER CTX beta 800 BigBore including tool cabinet and agreed-upon tooling and clamping equipment. The exact scope of supply will be determined before the contract is concluded, based on the photos and an accessory list. Sale Commercial sale with invoice and separately stated VAT. Availability: 04/2027 Dismantling, loading, and transport: by agreement Inspection possible after scheduling an appointment. All technical specifications are subject to verification. Subject to prior sale. Statutory warranty rights and any agreed contractual conditions remain unaffected.

Condition: excellent (used), Year of construction: 2014, Counter: 2,4 million Equipment / Additional information: Gksdo Aiflvepfx Akhsd In-feed Paper Size: Min: 210mm x 210mm, Max: 370mm x 670mm (999mm*1) Cuts: Max. 30 cuts per sheet Creases: Max. 20 per sheet Ideal For: Business cards, Folded Flyers, Tickets, Perforated vouchers

Condition: used, machine/vehicle number: -3809-, mileage: 130,000 km, power: 70 kW (95.17 HP), first registration: 08/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 2, Get started right away with a professionally converted food truck based on a reliable Mercedes-Benz! This vehicle combines proven technology with a brand-new, unused catering kitchen that has been manufactured to the highest quality and hygiene standards. Your advantages at a glance: 🚚 Immediately ready for use: Including TÜV inspection and complete expert report. 🛡️ Safety: 1 year warranty on the entire kitchen installation. 💳 Flexible financing: Attractive lease-purchase and leasing options available. 📑 All-inclusive package: We will take care of the TÜV inspection and expert report for you. 🛠️ Individually customizable: We will implement your desired equipment, different lengths, or additional serving hatches upon request. Vehicle data: Base / Model: Mercedes-Benz Food Truck / Mobile Food Vendor First registration: 08/2013 Mileage: 130,000 km Engine & Transmission: 2,143 ccm (70 kW / 95 hp), Diesel, Automatic transmission Environmental badge: Euro 5 (Green badge – free access to environmental zones) Permissible total weight: 3,500 kg (can be driven with a standard car driver's license) Equipment: Rear parking assist, 2 seats, step for easy entry GASTRONOMIC EQUIPMENT The stated price is without gas appliances. We install gas appliances for an additional charge. Example appliances: 🔥Professional gas appliances (Bertos brand): Professional catering equipment: Gas fryer "Bertos", 2 x 8 liter tank capacity, dimensions (W x D x H) 600 x 600 x 290, power: 13.2 kW, made of stainless steel, with drain valve, GL8+8B Gas stove "Bertos" with 4 burners, dimensions (W x D x H) 600 x 600 x 290, made of stainless steel Gas grill "Bertos", smooth plate, dimensions (W x D x H) 600 x 600 x 290, made of stainless steel Additional cost for the above-mentioned standard equipment: 4,980.00 euros ❄️Refrigeration: Godpfx Aj Ai Srrjkhjkd Small under-counter refrigerator 💧Water system & hygiene: Water system with water canisters, 30 liter capacity with fresh and wastewater canisters Two stainless steel sinks with fittings Hygiene package with collapsible towel dispenser and soap dispenser 10-liter hot water boiler Pump ⚡Lighting LED lighting on the ceiling LED lighting with color effects around the serving hatch with remote control Emergency light ✨Work area & safety Serving counter and work surfaces made of brushed stainless steel Insulated wall at the cooking area (fireproof) Exhaust hood made of labyrinth filters Non-slip flooring for catering Splash guard optional Entry through step Visit us on site and convince yourself of the quality of our vehicles! Contact us now for a viewing or a non-binding consultation.

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Godpfs Ai Stzex Akhskd Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: new, Mobile Culinary Container: Bar, Bistro & Lounge – All in One Transform any location into a hotspot with this high-quality catering container that combines functionality and modern design. This model is much more than just a sales stand – it's an inviting venue that encourages guests to linger. The Interior: Well-Conceived and Inviting Central Bar: The centerpiece of the container is the attractively designed bar area. Stylish pendant lamps in an industrial design provide the perfect lighting atmosphere above the bar, enhancing the modern look. Cozy Seating Lounge: The left side of the interior is designed as a comfortable seating lounge. Guests can enjoy drinks and food in a relaxed atmosphere here. The combination of soft cushions and the warm color creates a high level of comfort. Directly to the right of the entrance is this versatile piece of furniture that can be flexibly used as a counter, service station, or even a checkout area. Flexible Bistro Tables: Opposite the bar, directly in front of the large window front, are bistro tables with matching chairs. This area offers a great view of the outside and is ideal for a quick coffee or snack. Highlights at a Glance: Full-Surface Glass Front: The generous glazing across the entire front creates a bright, light-filled atmosphere inside and makes the space appear larger. At the same time, it offers passersby an attractive view and entices them to visit. Additional Outdoor Area: The container is designed so that it can be perfectly expanded with an outdoor area. Matching tables and chairs for outdoors (as shown in the picture) are the ideal complement to increase capacity and attract guests in good weather. Whether as a trendy coffee bar, an exclusive cocktail stand at events, a food station at festivals, or a pop-up restaurant in the city – this catering container is the ideal companion for mobile catering concepts that value quality and atmosphere. Give your catering business a mobile home that inspires. Contact me for more details and to arrange a viewing! I hope you like this description! You can, of course, adapt or supplement it to your liking, e.g., with specific dimensions or technical details. Gjdj Ai St Tspfx Akhskd Price is plus delivery of 1,500.00 euros net within Germany.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (at tel. ). Seppi M. MINI-BMS 105 forestry mulcher / MS08 / 5-10 tons / CUT CONTROL / NEW / in stock & immediately available Price: €16,790.00 net / €19,980.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches shrubs and trees up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 40 - 100 Intermediate adapter for BE314 Z1 - Approx. 200 mm high - Not required with OPT 372 hydraulic 190° swivel device Gedpfxeyltvno Akhokd Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net A self-contained hydraulic system is recommended for the drive. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2020, operating hours: 26,500 h, functionality: fully functional, machine/vehicle number: 14418, spindle motor power: 40,000 W, type of input current: AC, total height: 2,500 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, spindle diameter: 71 mm, Equipment: documentation/manual, rotational speed infinitely variable, 5-axis turning-milling machine - without bar feeder including 2x Hainbuch chucks (HS+GS) including signal light, collection tray, including 2x conveyor belts (front + side) including foot switch, including SBS tool breakage/tool life management, including 40 bar HD pump (90µm filter, screw spindle pump) including measuring probe, automatically swiveling, including automatic gripper arm for handling finished parts, new price 195,000 € (for sale due to lack of space, because of new purchase) max. turning diameter 250mm - turning length 620mm. Main spindle max. 4,500 rpm Counter spindle max. 5,000 rpm Gkodpfxs Ai Hcaj Akhed Y-axis +/-45mm Rev. 15 tool positions, all powered, Operating time: 26,500h Feed operation: 7,550h Fanuc i-HMI (touchscreen interface, DIN-ISO programming, Manual Guide) Bar passage: 71mm (main spindle + reducing tube D60 mm included) Bar feeder interface.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Seppi M. MINI-BMS 105 / Forestry mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 tons / DEMO – unit / in stock & immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades Gkodpfx Aoy Rdnaokhod - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - approx. 200 mm high We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Seppi products that are immediately available! Please contact us at [phone number] / [email address] for more information. Upon request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi range! Errors and prior sale excepted! Internal No.: 170051 = Further information = Year of construction: 2024 Please contact Marius Herden for more information.

Condition: ready for operation (used), Year of construction: 2019, Control panel: Siemens SIMATIC HMI, operational hours counter: 2169h, with Deduster MHG 1703-2,2 and various accessories. Gkodpfolubvbsx Akhjd

Condition: used, Year of construction: 2016, machine/vehicle number: PST44, Used REDA FBF 4015 pasteurizer 2000 LPH - Year 2016Technical Specifications & Performance DataThe REDA RE25TE centrifugal separator is designed for milk and whey skimming, standardization and clarification in dairy processing operations. It is a second hand industrial processing machine suited to beverage production and food-processing environments where controlled separation and product quality are essential.Manufacturer: REDAModel: RE25TEMaximum skimming capacity: 2,500 L/hBowl rotation speed: 7,500 rpmMotor power: 7.5 kW three-phase electric motorNet weight: 610 kg in standard installationGearbox oil quantity: approximately 3.8 litresProduct connections: DN25 and DN40Advanced Automation & Control SystemsThe separator features an automatically closing bowl, closing when approximately 6,000 rpm is reached during start-up. Typical start-up time is 4–5 minutes. Correct rotation is essential: the vertical shaft must rotate clockwise when viewed from above. The operating-water circuit uses regulated pressure to support reliable bowl operation and discharge cycles.Recommended constant operating-water pressure: 1.5–1.8 barOperating-water pressure adjustment via pressure reducerInstantaneous discharge feed flow: 1,500 L/hDisplayed operating counter value: 3,783,385Production Line Integration CapabilitiesThe REDA RE25TE can be integrated into dairy processing and industrial packaging preparation systems handling milk or whey before subsequent filling, bottling or packaging stages. It is suitable for installations configured as a standard machine, on a pedestal with balance tank, or on a pedestal with tank and pump. DN25 and DN40 product feed and outlet connections support integration with compatible sanitary process piping.As part of a used bottling line or dairy beverage production project, a centrifugal separator is typically positioned upstream of product storage, thermal treatment, filling and industrial packaging machinery. The unit is intended for liquid dairy products and is not specified for PET, glass or aluminum container handling.Machine Condition & Maintenance HistoryThe machine is presented as ready for operation. Proper maintenance includes keeping gearbox oil slightly above the midpoint of the oil sight glass, maintaining correct disc-stack compression, and observing the supplied intermediate discs used for disc-stack configuration. The bowl must be completely stopped before intervention or cover removal.Softened operating water is strongly recommended to reduce scaling and support dependable operation of the water system. Service access clearances must be retained around the machine for maintenance, disassembly and cover removal.Operational Performance & VersatilityThis centrifugal separator supports three key dairy process functions: skimming, standardization and clarification of milk and whey. Its separation performance makes it suitable for production environments requiring controlled cream separation, adjustment of product composition and removal of su... Gkjdpfxj Aiub To Akhsd

Condition: used, operating hours: 5 h, Equipment: Working height: 22m, Lateral reach: 12.57m, Articulation point: 8.18m, Front oscillating axle, Two travel speeds, 4 steerable wheels, 4 drive wheels, 360° rotation range (continuous), Integrated special drive axle, Proportional controls, Steering via joystick, Rotating beacon, Non-marking tires, Horn, Operating hours counter, Emergency power supply with 12V DC We are an official Magni telescopic loader sales and service partner, a Westtech Woodcracker sales and service partner, a JCB construction equipment sales and service partner, a Mercedes-Benz service partner, an Iveco service partner, and—with 800 used vehicles—one of the largest commercial vehicle dealers in Germany. Upon request, we can provide you with a leasing or financing offer. For more information, please visit our website. Errors and prior sale excepted! _____ Features: Working height: 22 m, Lateral outreach: 12.57 m, Articulation point: 8.18 m, Front swing axle, Two travel speeds, 4 steerable wheels, 4 drive wheels, 360° rotation range (continuous), Integrated special drive axle, Proportional controls, Steering via joystick rocker switch, Rotating beacon, Non-marking tires, Horn, Operating hours counter, Emergency power supply with 12V DC We are an official Magni telescopic loader sales and service partner, a Westtech Woodcracker sales and service partner, a JCB construction equipment sales and service partner, a Mercedes-Benz service partner, an Iveco service partner, and—with 800 used vehicles—one of the largest commercial vehicle dealers in Germany. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. For more information, please visit our website. Subject to errors and prior sale! Gkedpjz Rihnefx Akhjd Rental possible. = More information = Year of manufacture: 2024 Mast: Articulated boom Contact Tobias Ebert for more information.

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Travel : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 5.5 [kW] - C axis indexing precision : 0.001 [°] Gkodpfj Akfp Djx Akhod COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Z stroke : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 90 [°] GUIDE BUSH HOLDER 1 - Number of positions : 3+3 GUIDE BUSH HOLDER 2 - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1770 X 950 [mm] - Machine height : 1720 [mm] - Machine weight : 2000 [kg] MACHINE HOURS EQUIPMENT - CNC : Fanuc Oi-TF - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor - Coolant tank : KNOLL [l] - Bar loader : FMB MINIMAG 20/3200 - Oil mist extractor - Fire extinguisher *

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Gksdpfsz Nir Rex Akhed Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Gkjdpfx Aezn N Ikekhjd

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 8 spindles: 1) Horizontal, lower: 220mm, 5.5kW 2) Vertical, right: 130mm, 7.5kW 3) Vertical, left: 130mm, 7.5kW 4) Vertical, right: 130mm, 5.5kW 5) Horizontal, upper: 220mm, 11kW – 5th spindle adjustable electrically, up/down 6) Horizontal, lower: 220mm, 5.5kW 7) Horizontal, lower: 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal: 220mm, adjustable 360°, 7.5kW - All spindles adjustable, up/down, left/right - Spindle diameter: 40mm – Top: - 6 infeed rollers, double-toothed, pull-type + 1 single - 3 outfeed rollers, pull-type, rubber, smooth, double + 3 single - Meter counter – Bottom: - 1 infeed roller, toothed, pull-type, swiveling in the lower table - 3 metal outfeed rollers, pull-type, smooth - Feed on Cardan shafts - Rollers with pneumatic pressure - Stepless feed speed adjustment + 2 speeds, 10-60m/min - Feed motor: 10kW - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Central lubrication of the table - Diameter of dust extraction nozzles: 5x140mm, 3x120mm - Machine dimensions (L/W/H): 4680x1780x1850mm - Control cabinet dimensions (on pallet): 1020x1000x2230mm - Weight: approximately 5000kg ADVANTAGES - 8 heads - Universal spindle - Ideal for both wet and dry wood - German production, WEINIG brand - Unpainted - Very few operating hours - Used planer, in perfect condition Net price: 125900 PLN Gkodpfx Aezx Rlxskhod Net price: 29280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)