Used Counterweight for sale (190)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0315, workpiece weight (max.): 15 kg, wheel diameter: 80 mm, milling length: 220 mm, workpiece length (max.): 450 mm, TECHNICAL DETAILS Max. workpiece diameter: 80 mm Workpiece weight: 15 kg Workpiece length: -50 mm - 450 mm Machining Max. nominal module for steel: 3 mm Max. milling stroke: 250 mm Max. shift travel: 180 mm Table diameter: 145 mm Table speed: 150 rpm Milling head swivel angle: ±45 degrees Cutter-workpiece center distance: 10 mm - 200 mm Milling unit Cutter diameter: 90 mm Cutter length: max. 220 mm Cutter speeds: 1,000 rpm Milling spindle drive power: 15 / 23 kW Fpjdpfx Aaewmbnpo Ejd Table drive power: 5.8 / 19.0 kW MACHINE DETAILS Weight of the machine with counterweight: 10,000 kg Total connected load: 25–35 kVA

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Fjdpfx Aajcblc Ss Eopd Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: used, Year of construction: 2023, operating hours: 2,100 h, power: 37 kW (50.31 HP), maximum speed: 20 km/h, Operating hours: 2100_____with ROPS driver protection canopyKubota diesel engine D1803-CR-T37 kW = 50 hpRear counterweight – end plateHigh-speed gear 20 km/hHydraulic tool lockingRetention systemSpecial equipmentRear chassis with widened fendersCase weight 100 kgTyres 15.0/55-17 AS, 6-hole, ET -45Reinforced gear pump 19 ccm (37 kW engine required)LED work light kit, 800 lumens (2 front, 1 rear)Pickup frame Euro-WSHydraulic lockingTow device with bolt and lashing eyesLocation: Oberlauch Fjdsxmrvujpfx Aa Espd

Condition: used, Fine boring head, spindle tool, boring head, bridge tool, fine boring head boring tool, boring spindle, boring bar Holder for bridge tool = SECO - epb GRAFLEX (Made in France) type A731 200 Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-010 Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500 Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-600 Tool holder: GRAFLEX holder size G7 = Ø 46 mm Fpodpfoqgpb Ejx Aa Esd Machining diameter: 200-280 mm Adjustment accuracy: 0.01 mm Machining depth without extension: max. 140 mm - Adjustment by micrometer spindle and vernier (in steps of 0.01 mm, graduation 2.5 µm, to the diameter) - Cutting insert holder for Route cutting insert with approx. 10 mm edge length Total tool length with extension and mounting spigot: 184 mm Weight complete: 11.5 kg Very good condition, as good as new - probably unused

Condition: used, Year of construction: 2018, Liebherr R 924 SLC Litronic Year of manufacture: 2018 Operating hours: 5,400 Liebherr engine – Tier 4 – EPA Adjustable boom 4.00 m Stick 2.70 m Counterweight 4.8 t SLC undercarriage, track width 2,250 mm B60 tracks, 750 mm triple grouser pads, 50 links Automatic air conditioning Fpodpfx Ajw Rcrvsa Ejd Central lubrication system (automatic) Premium driver's seat Comfort radio Raised hand supports for joysticks Footrest Sun visor Impact-resistant roof window Roof window wiper Cab work lights, front, LED 2,100 lumens, 2 units Cab work lights, rear, LED 2,100 lumens, 2 units Bypass filter, Liebherr Fuel tank filling pump Reversing camera Camera for monitoring right side view Return line filter for hydraulic breaker Additional handrail for accessing the right upper side of the uppercarriage Access Travel alarm system button on right joystick (switchable) Proportional control, medium-pressure circuit (left) / high-pressure circuit (right) Control switch for operating high-pressure circuit via proportional control or joystick (switchable) High-pressure circuit switchable via pedal or mini-joystick High-pressure circuit with tool control Overload warning system Two-piece boom 4.00 m Stick 2.70 m Load-holding valve for lifting cylinder Load-holding valves for boom cylinders Load-holding valves for stick cylinder Adjustable rod guard for boom cylinder Work light on boom, right, LED 2,100 lumens, 1 unit Additional work light on boom, left, LED 2,100 lumens, 1 unit Work light guards on boom, right and left Central lubrication system extended for connecting link Stick protection Hydraulic quick coupler SWA 48 HD with Likufix

Condition: used, mileage: 58,943 km, power: 85 kW (115.57 HP), first registration: 04/1995, overall weight: 3,000 kg, fuel type: gasoline, color: green, axle configuration: 4x4, empty load weight: 2,849 kg, tire size: 205r16, wheelbase: 2,850 mm, gearing type: automatic, emission class: euro1, suspension: other, machine/vehicle number: 694, Equipment: all wheel drive, differential lock, truck registration, TUV and AU are newly made truck registration , The Puch is in a really good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The Puch is equipped with: ZAUGG snow blade electro-hydraulic drive, snow plow can be adjusted by the driver while driving, there is a counterweight in the rear for good traction, all-wheel drive and off-road reduction, rear differential lock, 2 seat paws, high off-road capability for extreme winter use. Tire size 205R16, Mercedes automatic transmission with 4 gears, total weight 3000 kg, engine capacity 2296cm? , 24Volt power supply, There are several vehicles in stock Fpodpsqx Sz Iofx Aa Eed All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp

Condition: used, Year of construction: 2019, Sennebogen 835 M-HDS Series E - Tier 4 / EPA Year of manufacture: 2019 Cummins engine - EPA - Tier 4 / Stage V, 231 kW MP34 HDS mobile undercarriage Drive control via single accelerator pedal Solid rubber tyres 16.00-25 (4-piece) Joystick steering Additional counterweight, 0.8 tonnes Cab adjustment: E270 Maxcab Maxcab Industry with front and roof windscreen Comfort operator's seat, air-suspended Safety belt, 2-inch Front guard for windscreen, Maxcab Industry Sun blind for roof window, Maxcab Industry cab Sun blind for windscreen, Maxcab Industry cab Radio with USB, SD, MP3, Bluetooth Catwalk on cabin side, with bolted railing Railing on upper carriage (Boxing ring) Sennebogen Hydro-Clean filter for hydraulic oil K18 working equipment – 10.1 m + 7.9 m (59’) 20 kW generator Fpjdpfsxu U Euox Aa Eed 1 LED work light on the cab roof (rear-facing) 2 LED headlights on the stick (1 left, 1 right) 1 LED light on the lower boom

Condition: new, functionality: fully functional, machine/vehicle number: 1331900524, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 4,800 mm, free lift: 1,560 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,190 mm, power: 17 kW (23.11 HP), battery capacity: 230 Ah, battery voltage: 80 V, DGUV certified until: 12/2025, fork carriage width: 1,100 mm, fork length: 3,610 mm, tire condition: 100 %, front tire size: 28X9-15, rear tire size: 200/50-10, overall weight: 4,305 kg, total length: 3,610 mm, total width: 1,210 mm, color: original, Equipment: front guard, lighting, sideshift, EP EFL303 S – The new era of the EFL series: Lithium forklift with a load capacity of 3.0 tonnes! The EFL303/S represents the next evolution of the EFL series from EP Equipment, designed for modern intralogistics applications. These lithium forklifts are characterized by robustness, ergonomics and flexibility to meet the requirements of modern logistics. Lifting mast Triplex lifting frame: 4,800 mm Highest performance for demanding tasks: Structure with aesthetics and practical design: The streamlined counterweight on the proven T8-IC chassis gives the EFL series improved durability and maneuverability, especially in tight spaces. Lithium technology as a replacement for the combustion engine: The EFL303/S uses modern lithium technology to replace the combustion engine and has proven itself to be an environmentally friendly and low-maintenance alternative. Multi-functions for safe operation and fleet management: The forklifts offer various functions such as an OPS system, telematics and a card/fingerprint system that not only focus on safety but also simplify fleet management. Ergonomic improvements for greater operating comfort: Optimized driver's canopy with full cabin: The structurally supported driver's canopy enables the use of a full cabin and offers more flexibility to meet the needs of customers. Improved ergonomics with joystick option: The S/P version can be equipped with hydraulic joysticks that enable precise control and improve operating comfort through simple controls. LCD display for clear information presentation: The improved LCD display provides the most important information such as speed, operating hours, battery status, mileage and parking status at a glance Greater reliability thanks to sophisticated components: Fpodpfx Asvm Sxysa Ejd Proven components for reliability: The second generation of the EFL series relies on sophisticated components, including electrical parts, transmission, lithium-ion battery, control and mast, to ensure high reliability. Standard equipment: Side shift, fork adjustment optional 4th hydraulic circuit complete LED work lights front + rear Bluespot rear GPS OPS Toyota suspended seat Integrated side shift Load protection grid Fork length as desired 3-sided red safety lighting Lighting packages Half cabin

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Fsdpfx Aaou Uvals Espd Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: used, machine/vehicle number: GL 02D 080093, Year of construction: 2008, Offer 25369 Technical Data: - Max. load capacity with full counterweight: approx. 250 kg - 4 pcs. vacuum glass suction cups, 200 mm - Lifting height (center of uppermost suction cup): approx. 2.5 m - Separate height adjustment & rotation device - Min. installation height: approx. 1285 mm - Max. installation height: approx. 2720 mm - Max. overall length: approx. 2100 mm - Min. width: approx. 620 mm Fpodpfoxurq Iex Aa Ejd - Operating weight depending on counterweight: approx. 260 to 410 kg - Charger: 220 V - Battery: 12 V - Operating manual

Condition: used, mileage: 11,920 km, power: 95 kW (129.16 HP), gearing type: other, fuel type: gasoline, color: yellow, overall weight: 23,000 kg, empty load weight: 21,816 kg, maximum load weight: 1,184 kg, number of seats: 1, first registration: 02/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 11,920 h, total length: 7,700 mm, driver cabin: other, construction height: 4,000 mm, Equipment: air conditioning, parking heater, trailer coupling, The used Atlas 1604 K ZW KLIMA rail-road excavator is a versatile excavator, equipped with a quick coupler and a reliable Deutz engine. The excavator was built in 2013 and has 11,920 operating hours. The machine offers an engine power of 95 kW (129 hp) and a displacement of 4,038 cc. It has a spacious double cabin with a heated, air-suspended comfort seat and air conditioning. The vehicle is suitable for use on trams thanks to its narrow axles and special support. Other features include an Eberspächer fuel heater, a CWF600 soot particle filter and a rear view camera with monitor. The excavator has a heavy counterweight of 4.5 tons and a swing radius of 2,000 mm, which ensures greater stability and efficiency on the construction site. The excavator is also equipped with a wagon braking system that can be controlled from the cabin, as well as an electronic stroke limiter for fine-tuning the lifting and working cylinders. The machine has various loading options and is offered with a comprehensive maintenance record (service booklet). Inspections are possible during the stated opening hours without prior appointment. Fedpfxor Uzazj Aa Ejpd Sale only to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: like new (used), Year of construction: 2018, machine/vehicle number: AGH631, 1x Mobile Column Slewing Crane, Traveling Crane Fedpfxexdvfuo Aa Espd Type WK1 - Year 2018 Load capacity at full outreach: 100 kg / 0.1 t Overall height: approx. 3.65 m, Outreach: approx. 4.7 m Hook height: approx. 3.1 m, Lower edge of jib: 3.4 m Base size: approx. 110x110 cm Including trolley with drawbar!!! Column with counterweight incl. ABUS 100 kg GM chain hoist, cable drag chain, and accessories Total weight approx. 3500 kg (Counterweight approx. 3300 kg) Connection: 400V, slewing range 270° Very good condition, almost as new, fully functional. Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold See pictures Shipping by freight carrier or pick-up

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Fpsdpfx Aaexk Tzgs Esd

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Year of manufacture: 2025 Fedpfowmbxzjx Aa Espd * Kubota engine 36 kW * Operating weight: 2,600 kg * Lifting capacity: 2,350 kg * Pushing force: 2,800 daN * Tyres: 31x15.50-15 X-TRAC * 1st auxiliary hydraulic circuit (double-acting) proportional on joystick incl. continuous flow * ROPS/FOPS foldable deluxe safety canopy * StVZO package up to 20 km/h * Road lighting (halogen) * Mudguard extensions * Rear counterweight plate 62 kg under the machine * Standard bucket 1,400 mm width and pallet forks 1,000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Kubota engine 18.2 kW * Operating weight 2,100 kg * Lifting capacity 2,260 kg * Tyres 27x10.50-15 SKID (machine width 116 cm) * 1st auxiliary circuit (DW) proportional on joystick incl. continuous operation * ROPS cab including heating/2 mirrors/2x halogen work lights front & rear/radio – mechanically suspended, adjustable comfort seat with seat belt + armrest * StVZO package up to 20 km/h * Road lighting (halogen) * Mudguard extensions * Rear counterweight plate (90 kg) incl. shunting coupling Fodpfew Hxtiox Aa Ejpd * Standard bucket 1,200 mm wide and pallet forks 1,000 mm

Condition: new, functionality: fully functional, Year of construction: 2025, * New machine * Tyres 31x15.50-15 X-TRAC (machine width 160 cm) * 1st and 2nd auxiliary circuits (DW) operable via proportional slider on the joystick forward Fodpfx Aaew Hxuge Ejpd * ROPS cab incl. air conditioning * Reversible fan * 4-wheel, 2-wheel, and crab steering * Air-suspended, adjustable comfort seat * Additional halogen work light at the front of the lift arm * Rear counterweight plate 180 kg incl. shunting coupling * Battery 100 Ah * Quick coupler * Earthmoving bucket 1600MM * Pallet fork 1200MM

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,585 h, machine/vehicle number: HHKHK607CE0000762, Equipment: UVV, additional headlights, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, steel tracks, Year of manufacture: 2023 Operating hours: approx. 1,585 Engine: Cummins B6.7 Power: 129 kW (175 HP) at 2,000 rpm Emissions standard: EU Stage V Operating weight: approx. 22,100 kg Adjustable boom: 5,700 mm Stick: 2,400 mm Stick safety valves Boom safety valve Central lubrication system (Beka Max) Bucket linkage available 2-way hydraulic lines Proportional control LED work lights Adjustable boom: 5,680 mm Rearview camera Hi-Mate telematics system (mobile version) Roadliner tracks (600 mm) Air-cushioned, heated operator seat Proportional joystick Standard safety railings Fjdoxl R Iyopfx Aa Ejpd Laminated front window 7 mm Fuel pump Piping for quick coupler Bucket/grapple mode switch No slew lock Hydraulic oil VG46 Rain cover 360° LED warning beacon Counterweight Standard Hyundai key

Condition: good (used), Code: 0352 Brand: OMW VALENTINI Model: 700 Pit clamp for chairs, for assembling classic, modern, style chairs etc. Technical data: Assembled steel frame Useful pit mm 700 x 700 Fsdpfx Aaot Eul Aj Eepd N° 4 cylinders with adjustable stroke that can be moved on the plane Counterweight Foot pedal for simultaneous operation of the 4 cylinders Compressed air 7-8 atm Overall dimensions mm 1300 x 920 x 750 h Weight kg 700

Condition: new, functionality: fully functional, power: 8.09 kW (11.00 HP), color: orange, overall weight: 1,000 kg, Year of construction: 2024, operating hours: 1 h, OFFER!! Old price: €8,925 gross Now: €8,8508 gross! (We also offer the larger VIP 12 mini excavator with a 3-cylinder KUBOTA engine and a gross weight of 1,200 kg – now at a special price of €11,300 gross!) Mini Excavator VIP10 Articulated Boom - Professional and durable. The VIP10 RS model is the perfect equipment for the most demanding construction, electrical, plumbing, repair, and service companies in similar industries. The VIP10 RS model is also equipped with extendable tracks and a pivoting boom, making working in tight spaces much easier. We also guarantee after-warranty service. Mini excavators are manufactured on the basis of and under the supervision of European technicians. The equipment is built on a strong structure and can operate in all conditions. BUCKET: (3 buckets are included in the price) - 300 mm - 500 mm - 800 mm We also have: - Swivel bucket - Auger - Grab - Ripper tooth - Rake - Quick coupler - Demolition hammer TECHNICAL DATA: - Weight: 1,000 kg - Digging depth: 1,568 mm - Width: approximately adjustable (800 mm - 954 mm) - Engine: Koop - Number of cylinders: 1 cylinder - Fuel: Diesel Power: 8 kW / 11 HP - Rotation speed: 10.5 rpm - Gradeability: 30° - Pump type: Gear pump - Pressure: 16 MPa - Oil flow: 16.6 l/min - Color: yellow/orange DIMENSIONS: - Wheelbase: 914 mm - Track length: 1234 mm - Upper chassis clearance: 453 mm - Counterweight turning radius: 660 mm - Chassis width: 954/800 mm - Track width: 180 mm - Transport length: 2850 mm Fedpfxjvzxl Aj Aa Espd - Seat-to-ground height: 1525 mm - Overall height: 2211 mm - Left arm swing: 363 mm - Right arm swing: 325 mm WORKING RANGE: Ground digging radius: 3039 mm Digging radius: 3136 mm Max. digging depth: 1568 mm Max. digging height: 2646 mm Max. unloading height: 1876 mm Maximum vertical digging depth: 1377 mm Raised blade height: 141 mm Lowering depth Dozer blade: 200 mm - 3-circuit control system for e.g., drill - hammer operation, etc. - LED work lights PRICE: €7,150 net €8,508.5 gross - INCLUDES 3 excavator buckets (300, 500, 800) - For machines regularly serviced by us, we EXTEND the WARRANTY to TWO YEARS - FREE 12-MONTH WARRANTY - after this period, we offer all original parts if needed! - FREE delivery within a 200 km radius - Sales possible WITHOUT TAX (only with VAT number) - FINANCING available - We are always at your disposal! KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the headquarters of Kingway in Germany. We have a huge selection of machines in stock, with around 100 available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also offer our customers access to all spare parts and mobile service. KINGWAY GERMANY Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 1,500 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, pallet forks, (We also offer the same model with a cab at a special price) The WARRANTY (3 YEARS!) applies exclusively to machines purchased DIRECTLY from us, not from other dealers. Fodpfx Ajvz Tguoa Espd KINGWAY DEUTSCHLAND is the only authorized stationary specialist dealer for the Kingway brand on the German market, with its own service department. The FARMER 906 model is the ideal equipment for agriculture, construction, electrical, plumbing, repair, and similar industries. We also guarantee equipment servicing after the warranty period expires. Wheel loaders are supplied according to standards and under supervision. TECHNICAL SPECIFICATIONS: - Manufacturer: KINGWAY DEUTSCHLAND e.K. - Model: 906 - Open canopy, working lights, joystick control, rain guard roof. ENGINE DETAILS: - Engine: PERKINS 403J-11 – Diesel - Cylinders: 3 - Displacement: 1131cm³ - Emission class: Euro 5 - Max. engine power: 18.5 kW / 25 HP at 2800 rpm - Max. torque: 66.9 Nm at 2100 rpm - Cooling system: Water-cooled - Noise level: 92 dB - Power supply: 12V - Battery: 12V / 60 Ah DRIVE: Drive unit: Hydrostatic with 2 drive motors (1 speed) – PWG ITALY Travel speed (1st gear): 0-18 km/h CAPACITIES AND PRESSURES: - Fuel tank capacity: 32 liters - Hydraulic oil tank capacity: 40 liters - Max. hydraulic oil flow: 36 L/min - Max. hydraulic pressure: 180 bar - Hydraulic oil flow: 33 L/min WEIGHTS: - Operating weight: 1,500 kg - Max. tipping load (straight, on pallet forks): 900 kg - Max. lift capacity (at mounting): 600 kg DIMENSIONS: - Steering angle: 45° - Turning radius (inner/outer): 1,556 mm / 2,500 mm - Lifting height (lower edge of standard bucket): 1,850 mm - Dumping height (with standard bucket): 1,830 mm - Dumping angle: 45° - Standard bucket: 0.4 m³ loading volume - Overall length: 3,660 mm (with standard bucket) - Overall width: 1,150 mm (standard version) - Overall height: 2,280 mm (standard tires) - Track width: 880 mm - Wheelbase: 1,370 mm TIRES: - 26x12.00-12 agricultural tread FEATURES: - Very high-quality and robust build - Euro mount (STANDARD) - Lockable tank and engine hood - Easy handling - Compact and versatile - Lighting system - Hydraulic quick coupler system - Third hydraulic circuit for attachments - CE certified according to the latest standards and guidelines - Sale WITHOUT VAT possible (only with VAT ID number) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within 200 km - One wheel loader / yard loader Farmer 906 - Includes bucket 1.35cm + forks - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - EURO MOUNT - ROAD APPROVAL - Float function - Operating permit for Germany - Tow hitch For each of our loaders, you can also order: - Tow hitch, - Additional counterweights, - Any possible accessories such as dozer blade, grapple, snow plow, high-capacity buckets, sweeper, grab bucket. WARRANTY: - Each machine comes with a 12-month warranty, which can be extended by another year. - After the warranty period expires, our customers are guaranteed access to all spare parts. SERVICE: - We have our own mobile service that serves all our customers in Germany and abroad. PRICE: 16,500 € net 19,635 € gross

Condition: new, Year of construction: 2026, Mini Crane BEFARD TB10002 – Pick&Carry 1800 KG Technical specification: • Pick&Carry crane – able to move with a load of up to 1800 kg • 3-in-1 power supply – diesel engine, electric motor 230V, 400V, 110V, and lithium-ion battery • Max lifting capacity: 6000 kg • Reach approx. 23.5 m (with optional equipment) • Hydraulic winch 990 kg + attachments • Non-marking tracks • Extendable tracks, width adjustable from 78 to 110 cm • Hydraulic JIB arm with two extensions • Hydraulic counterweight (ballast) • Infinite 360° column rotation • Radio remote control with visualization of working range and outrigger spread • Two working and driving modes • Overload protection system • Outrigger footpads included ADDITIONAL OPTIONS: • Main boom searcher hook • Hydraulic jib searcher hook • Manual jib for the hydraulic jib • LED working light Custom color available Three-cylinder diesel engine Made in Japan Fedpsw Afg Usfx Aa Eepd

Condition: new, power: 36.4 kW (49.49 HP), fuel type: diesel, chain condition: 100 %, Year of construction: 2023, operating hours: 5 h, Equipment: additional headlights, cabin, hammer hydraulics, rubber tracks, steel tracks, Comfort package cab (AutoHVAC, 7-inch display) Long dipper arm and heavy counterweight Hydraulic coupling-capable long dipper arm with pin attachment (AUX5) 2nd additional hydraulic line on the long dipper arm, quick coupling Heated, sprung seat with cover and headrest Object handling package Fsdpfx Aaenducme Eopd Boom with LED lights front and rear Additional hydraulic line Swivel coupling with standard blade, LA + Aux5 E50, E55, E55z, E60, E62 / Protection Plus / 3 years or 3000h Bucket package for Bobcat E55zE2 V Quick coupler system hydr. SW GE020 - BVC125-E55z Backhoe bucket BG06-0300 SW020 OZ Backhoe bucket BG06-0600 SW020 OZ

Condition: new, power: 41 kW (55.74 HP), fuel type: diesel, chain condition: 100 %, operating hours: 5 h, Equipment: rubber tracks, Mirrors, cab Cab comfort package (AutoHVAC, 7-inch display) Cab heating/air conditioning Long dipper arm + heavy counterweight and add-on Hydraulic coupling-capable long dipper stick with pin attachment (AUX5) 2nd additional hydraulic line on the long dipper arm, quick coupling Heated, sprung seat with cover and headrest Object handling package Direct-to-tank with AUX4 Hydraulic track tensioning, Aux 4, yes Fuel delivery, yes Radio Bluetooth Additional changeover switch with quick couplings on the LA Boom with LED lights front and rear plus beacon light Additional hydraulic line Swivel coupling with standard plate, LA Grease gun set + holder in the machine E50, E55, E55z, E60, E62 / Protection Plus / 3Y or 3000H (total) Bucket package for Bobcat E60E2 V Quick coupler system hydr. SW GE020 - BVC125-E55z Fpedpfxsndfnie Aa Eed Backhoe bucket BG06-0300 SW020 OZ Backhoe bucket BG06-0600 SW020 OZ Backhoe bucket BG06-0800 SW020 UNI- ZII Trench cleaning bucket rigid BG06-1400 SW020

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Fpedpfx Asx A Uc Aja Eed Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks Fpedpfswkgq Rjx Aa Eod • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price