Used Crank Shear for sale (2,082)

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Csdpfx Anerzfh Hs Nogu Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, control type: NC control, working width: 3,200 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, Motorized Guillotine Shear Make: Schröder Model: MHSU V 3200 x 3.0 Year: 2007 Technical Data Manufacturer: Schröder Model: MHSU V 3200 x 3.0 Year of manufacture: 2007 Working length: 3200 mm Sheet thickness: 3.0 mm Strokes per minute: 34 (continuous mode only) Drive power: 9 kVA Dimensions: L 4.0 x W 1.9 (plus support arms 0.6m) x H 1.5 m Weight: 3300 kg Equipment - POS 100 control system with 9-fold program memory - Pneumatically controlled sheet support device - Linear front guide for movable T-slot consoles - 2 movable support arms on linear guide - Right-hand extended back gauge with T-slot and scale (currently dismantled) - Hold-down device with hard rubber strip to protect polished sheets - Rear area safeguarding via light barrier - Selector switch for single and continuous stroke - Foot switch All information provided without guarantee. Cedpfoy R Na Uox An Njgu A demonstration is possible at any time in our showroom.

Condition: used, Shearing/Punching Machine PEDDINGHAUS 210 SUPER 11 Throat depth: 305 mm Maxi punching capacity: 40 T Power: 3 kW Punching capacity: Ø 20 x 15 mm - Ø 90 x 5 mm (see abacus) Shearing capacities: (see abacus) Round shearing: Ø 34 mm Square shearing: 30 x 30 mm Angle shearing capacity: 100 x 10 mm 1 side for shearing/undercutting - 1 side for punching Cgedpfx Aezbrpron Nou Delivered with some punches Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1800 mm Weight: approx 1,2 T

Year of construction: 2024, condition: new, *image similar* Technical data Cgedpfx Ajhk Ngcsn Nju sheet length: 2.050 mm sheet thickness : 3 mm Total power requirement : 3 kW Dimension (LxWxH) 2,4 x 1,35 x 1,2 mm

Year of construction: 2024, condition: new, Make: DURMA Type: MS 3004 Year of construction: 2024 Cutting length: 3100 mm Sheet thickness: 4 mm Cgsdod R Emfopfx An Nou Control system: EZM9910 Operating hours: 0 Cutting angle: 1°30 Number of strokes per min.: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions L/W/H: 3700x2300x1350 mm Weight: 3780 kg Standard equipment EZM9910 control unit Backgauge range 750 mm programmable via control unit Plastic inserts for hold-down device 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop switch Spring flap stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper blade with 2 cutting edges Lower blade with 4 cutting edges CE marking Extended equipment Adjustable angle stop 0-180 The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Year of construction: 2024, condition: new, Motorized guillotine shears Technical data Cutting capacity: 2,5mm Cutting length: 2550mm Cgodpfehk Nf Rox An Neu Cutting angle: 1°40' Stroke rate/min: 35 1/sec. Motor power: 3kW backgauge range: 550mm table width: 400mm table height: 850mm height: 1260mm width: 1350mm length: 3100mm Weight approx.: 1540kg

Year of construction: 2022, condition: new, Motorized guillotine shear MS 1303 Technical data: Sheet width: 1350 mm sheet thickness: 3,0 mm stand width - table width: 400 mm working height: 850 mm Cjdpfehk Nfuex An Nsgu Control: conventional

Year of construction: 2024, condition: new, Make: DURMA Type: MS 2504 year of manufacture: 2022 Csdpfx Anjd R Er Do Nsgu cutting length: 2550 mm sheet thickness: 4 mm Control: EZM9910 Operating hours: 0 Cutting angle: 1°30 Strokes per min.: 42 motor power: 7,5 kW backgauge range: 750 mm table width: 450 mm table height: 800 mm dimensions L/W/H: 3200x2300x1350 mm Weight: 3780 kg Standard equipment control unit EZM9910 backgauge range 750 mm programmable via control unit Jvcmke Plastic inserts for hold-down 1 side stop and 2 sheet support arms Finger guard Portable foot switch with emergency stop Spring loaded stop in T-slot of the support arms Ball screw Ikh7877 Table plates with ball rollers Upper knife with 2 cutting edges Lower knife with 4 cutting edges CE marking Extended equipment Adjustable angular fence 0-180 The machine can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our facility in Staufenberg. We will be happy to provide you with further information on request.

Condition: good (used), functionality: fully functional, Year of construction: 2020, Hydraulic Guillotine Shear Make: Fasti Type: 530 – 3000 x 6mm Year: 2020 Technical Specifications Manufacturer Schröder Model 530 - 30/6 Year of Manufacture 2020 Sheet Width 3040 mm Sheet Thickness 6.00 mm (400 N/mm²) Blade Gap Adjustment 0.5 – 1.8 mm Strokes per Minute 24-61 spm Drive Power 12.0 kW Space Requirement (LxWxH) Approx. 4.00 x 3.00 x 1.96 m Weight Approx. 6.5 t Equipment/Features - 12” touchscreen controller PSC 150 on swiveling panel - Energy-efficient drive for frequency-controlled motor and pump - Automatic blade gap adjustment - Adjustable hold-down pressure selectable via the control system - Motorized backgauge 10–1000 mm with ball screw spindles - Pneumatic sheet holding device - LED cutting edge illumination - Programmable start and end position for the blade beam - Angle stop mounted on the left incl. electronic length measurement system, fine adjustment, and lateral flip stop with linear guide, 1000 mm - 2 backgauge arms with ball rollers, adjustable on linear guides - Table support made of stainless steel sheets with ball rollers - Rear area secured with light barrier - Scrap and small parts chute to the front incl. "Return to Sender" function - Movable table extension mounted on guide rail - Finger guard, can be raised approx. 1500 mm, incl. electrical safeguarding All information provided without guarantee. Cgodpfx Aoy R Dcwsn Nju A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 1987, cutting dimensions max. 600 x 1000 mm Cgodpfx Anetqql Io Neu plate thickness max. 3 mm cutting angle 1,5 ° side stop electrical adjustable 0 - 1010 mm rear stop electrical adjustable 0 - 610 mm no. of strokes 60 Hub/min total power requirement 14 kW weight of the machine ca. 8,7 t dimensions of machine L x W x H 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 Cgodpsxf Uytjfx An Nju - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Cgsdpfx Anoy Sbwze Nju Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position - Crank handle with index plate - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Weight: 81 kg Good condition

Condition: excellent (used), Slate shears TS NS1 in case - Attachments for cordless screwdriver Cjdsy Sayzopfx An Nogu - As new

Year of construction: 1989, condition: ready for operation (used), A guillotine shear is offered. Cutting length: 6000mm, cutting capacity: steel (approx. 400N/mm²) 6.0mm, stainless steel: approx. 4.0mm, stroke rate depending on material, typ. 4-10strokes/min, back gauge: 1000mm, cutting angle: approx. 0.5°-2.5°, overall dimensions X/Y/Z: approx. 7200mm/2400mm/2300mm. Inspection possible by appointment. Cedpfx Anszadl Ao Njgu

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button Cgodpoy Ig R Eefx An Nsu - Rear safety guard (protective grille) - original operating instructions

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Cgodpfx Anozaqm Hj Neu Capacity: 3100 x 6 mm Back gear gauge travel: 750 mm Year of construction: 2002 Motor power: 7,5 kW Number of sheet presses: 18 SP8 Command Blades with 4 cutting edges Voltage: 380 V

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Csdsy U Nqbopfx An Nogu

Condition: good (used), functionality: fully functional, Year of construction: 1998, Strip width: 400 - 1600 mm Edge trimming width: 400 - 1580 mm Strip thickness: 0.4 - 3.00 mm Roller diameter: 220 mm Roller width: 1700 mm Manual adjustment stand Cjdpfx Aszbg T Sjn Njgu Electric immersion depth adjustment Hydraulic clamping nuts with manual high-pressure pump

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Cgjdpfxsza A E Ie An Nsu Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: good (used), Year of construction: 1992, Sheet metal shears, tin scissors, sheet metal scissors, hydraulic shears -Sheet shear: hydraulic Csdeywzbdopfx An Nogu -Cutting width: 2000 mm -Max. cutting thickness: steel 6 mm -Features: Back gauge, cutting gap adjustment -Space requirement: 3280/2700/H2060 mm -Transport dimensions: 2280/2700/H2060 mm -Weight: 5980 kg

Condition: used, Year of construction: 1993, Plate shear Manufacturer: LVD Type: MVSB 62/8 Year of manufacture: 1993 Working length max.: 6,200 mm Cedpfxsy Atn Hj An Njgu Sheet thickness: 8 mm Weight approx.: 13,000 kg ä3626

Condition: excellent (used), Year of construction: 1999, actuation type: hydraulic, working width: 3,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, back gauge speed R-axis: 100 mm/s, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, We offer this very good AMADA PROMECAM GS 630 hydraulic guillotine shear, year of construction 1999. Cedpfxsy Ax N Ne An Negu If you have any questions or need more information, feel free to send us a message or give us a call. CUTTING LENGTH: 3050 MAX THICKNESS MS: 6mm MAX THICKNESS SS: 4mm BACK GUAGE LENGTH: 1000mm BACK GUAGE: PROGRAMMABLE POWER SPEED 100M/PER/MIN MOTOR POWER: 5.5KW

Condition: good (used), functionality: fully functional, Year of construction: 2007, Hydraulic Guillotine Shear Make: BOSCHERT Model: SX 3006 Year of Manufacture: 2007 Technical Data Manufacturer: Boschert Model: SX 3006 Year: 2007 Cutting capacity (mild steel ST 42): 6 mm Cutting capacity (stainless steel): 4 mm Cutting length: 3100 mm Throat depth: 180 mm Backgauge: 1000 mm Cutting angle: 1.35° Motor power: 12 kW Voltage: 400 V, 50 Hz Dimensions (L x W x H): 3.80 x 2.28 x 1.85 m Weight: 7 t Equipment Cgodpfxey Nmh Te An Nju - CNC-controlled backgauge via ELGO controller, up to 1000 mm - ELGO Electric P 87 control - Electrically adjustable cutting gap with display for selected material thickness - Pneumatic sheet support device - Electrical cutting length limiter - Angle stop - 2 support arms - Cutting line illumination - Folding finger guard, approx. 1000 mm - Rear safety light curtain - Mesh safety guard All information is subject to change and provided without liability. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible. Cgedoy Uyc Ijpfx An Nsu

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück Cedpfx Aeu Icn Ejn Njgu height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *