Used Crank for sale (925)

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Todpfx Adevut Dyeljf Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, Adjustment unit with 2 positioning tables featuring hand crank adjustment - made from aluminium system profiles. Linear unit, linear axis, loading unit, linear guide Manufacturer: Custom-built Year of manufacture: 2000 Track length: 3600 mm Travel distance: 2750 mm Table size: 590 x 355 mm Usable table area with index: 470 x 355 mm Tabletop material thickness: 30 mm (steel) Aluminium system profile rail, length: 3600 mm (profile length) Aluminium system profile, cross-section: 80 x 80 mm (base rail for guide) Aluminium system profile rail, cross-section: 123 x 120 mm (front) Todjxf Uq Espfx Adlsf Height to top of tabletop above floor: 640 mm Height to top of linear guide carriage above floor: 615 mm Height to top of aluminium system profile 80 x 80 mm above floor: 575 mm - Stable and torsion-resistant construction made from aluminium system profiles (80 x 80 mm) and steel feet - For handwheel adjustment, a rack is bolted to the aluminium system profile rail - Hand crank adjustment via gear and rack, individually for each table - Spring-loaded index pin for fixed indexing, unlockable by hand lever - Adjustable index plates on the aluminium system profile rail - Standard linear guide width = 28 mm, height = 26 mm Overall dimension L x W x H: 3640 x 900 x 780 mm Weight: 450 kg Good condition

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm Tsdpfx Adjb H Ibuslef metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch -Manufacturer: VEB, steel winch with ratchet safety crank type 10.10 -Load capacity: 10 t -Lifting height: 330 mm -Dimensions: 300/210/H685 mm Todpfx Adst H Trdjlsf -Weight: 35 kg

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, table length: 1,500 mm, stroke length: 450 mm, table width: 2,050 mm, pressing force: 400 t, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Tsdpfev E Rm Hex Adlef Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,500 mm, pressing force: 315 t, stroke adjustment: 40 mm, warranty duration: 24 months, lifting height: 820 mm, Equipment: safety light barrier, STANDARD FEATURES: • Steel construction body • Pneumatic clutch brake • T-channel additional additional plate • 8 Bearing rams • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano type control panel • Touch LCD screen • Motor reverse movement • Overload hydraulic fuse • Motorized ram adjustment mechanism • Photocell protection curtain • Gear group in closed oil chamber • Double coil safety valve • Compliance with CE Standards • WE PRODUCE C TYPE ECCENTRIC PRESSES FROM 5 TONS TO 250 TONS. • WE PRODUCE H TYPES FROM 150 TONS TO 2000 TONS. • COUNTRY OF ORIGIN: Türkiye • WARRANTY PERIOD: 24 MONTHS • DEADLINE PERIOD: WILL BE SPECIFIED IN THE OFFER. Tedpfx Aovtw Awodlsf TECHNICAL SPECIFICATIONS: PRESSURE (TON) 300 STROKE (MM) 220 REVOLUTION (D/D) 24-40 TABLE-RAM RANGE (MM) 820 TABLE DIMENSIONS (MM) 1200X2500 MINIMUM MOLD HEIGHT (MM) 450 REGULATION DISTANCE (MM) 150 SIDE WINDOW WIDTH (MM) 700 MOTOR POWER (KW) 30 WEIGHT (KG) 39000 MACHINE DIMENSIONS (MM) 4700X3500X2000 SINCE WE ARE A MANUFACTURER, TECHNICAL SPECIFICATIONS CAN BE CHANGED ACCORDING TO YOUR REQUESTS

Condition: used, Year of construction: 1965, pressure 160 t stroke 15 - 170 mm no. of strokes 15 - 40 /min distance between columns 2050 / 1900 mm dayligth (stroke and adjustment up) 690 mm Tjdpfxsvuk S Ue Adlef column travel -side 800 mm table surface area 1600 x 800 mm table height over floor 900 mm ram surface 1620 x 700 mm ram adjustment 140 mm power requirement 15,0 kW Weight 24,0 t dimensions of the machine ca. 3,3 x 2,3 x 5,3 mxmxm total height over floor 4,8 m height under floor 0,5 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, motoric ram adjustment, two-hand and foot operation as is where is, WITHOUT putting into operation

Year of construction: 1971, condition: ready for operation (used), Large working width: 2000 mm for sheets up to: 3 mm Tedpfxehy Tqao Adlof clear distance between columns: 2050 mm throat depth: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 tons

Condition: used, Crank winch, Dunkraft, diamond jack, steel winch -Load capacity: 10 t -Safety crank -self-locking gear -with profiled head-claw -with a solid claw Tsdpfxeb A I Hnj Adljf -Weight: 50 kg

Condition: used, Year of construction: 2018, pressure 800 t stroke 80 – 360 / 400 mm no. of strokes 3 – 60 /min distance between columns 4200 mm dayligth (stroke and adjustment up) 1400 mm column travel -side 1800 mm table surface area 4000 x 1800 mm hole in the table 3400 x 450 mm table height over floor 950 mm ram surface 4000 x 1700 mm ram adjustment 305 mm material width 800 mm material thickness 0,7 - 6,0 mm material cross-cut 2800 mm² power requirement 475,0 kW Weight 154,00 t dimensions of the machine ca. 6,05 x 3,95 x 7,7 mxmxm Tsdpfjw D Hkdex Adlef total height over floor 6,6 m Servo-Press (Press, Coil Line, Transfer) - Press Schuler, MSD 2-800-4.0x1.8-400 Servo - eccentric drive in transverse-shaft design via 2 torque motors, hydraulic overload protection, motorised ram adjustment, ram counterbalance, main control panel with TFT touch colour display motor-driven retractable change plate, hydraulic slide-in clamping elements - Coil Line Schuler-Automation AC-UEL-M-0800 / AC-SH-9-70/160-0800 R-L / AC-RM-EHP-0800 Transfer Schuler-Automation AT2-M-800-500-405

Year of construction: 1988, condition: used, Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m Todpfjhgm D Hjx Adlsf -Number: 4x winch available -Price per piece -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm Tjdpfsvuk H Esx Adlsf permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available) Todpfx Adovut N Aeljf

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment Tjdpfxsvuk Euj Adlof as is where is, WITHOUT putting into operation Video of 'sister maschine' available

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Very good condition Tedjxuf Itopfx Adljf

Condition: used, Year of construction: 2000, machine/vehicle number: 6126, Comau CNC Crankshaft Turn Broaching Machine Tedpexxx E Hsfx Adlsf max crankshaft dimensions, ca.: dia 250 x 800 mm, Twin-Station Crankshaft Turn Broaching Machine for Main and Pin Bearings, internal part transfer, two twin-cutting-head stations, one CNC SIEMENS SINUMERIK 840D per station with X1/X2 and Z1/Z2 Axes and C1/C2/C3/C4 rotating spindle Axes for each station, LxWxH, ca. 8x3x3m, weight, ca. 30to

Condition: used, Year of construction: 2002, Adcole 1200 dh camshaft inspection, s/n 7736, setp 2002, 4310 kgs, machine, electrical cabinet, printer/computer cabinet, Tsdpfx Ajw U Subjdljf machine dimensions 1700mm x 1300mm x 2370mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2026, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Tedpoxrtarsfx Adlsf Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Tsdow A Axbopfx Adlsf Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2001, machine/vehicle number: 467-72, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 630 CNC Pin Grinder Tsdpfsxxybpjx Adlsf crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm Tjdpfxsxwdwro Adlsf spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Year of construction: 2013, operating hours: 2,730 h, functionality: fully functional, workpiece weight (max.): 150 kg, clamping length: 1,700 mm, grinding wheel diameter: 660 mm, center height: 270 mm, grinding length: 1,500 mm, 1 pc. used crankshaft & camshaft cylindrical grinding machine Brand: BERCO Model: LYNX 2000 Year of manufacture: 2013 Technical Data Max. grinding diameter (plunge grinding): 220 mm Max. grinding diameter (cylindrical grinding): 300 mm Max. workpiece weight between centers: 150 kg Center height above table: 270 mm Distance between centers: 1,700 mm Max. grinding length: 1,500 mm Chuck diameter: 180 mm Tailstock quill travel: 50 mm Max. grinding wheel diameter: 660 mm Min./max. grinding wheel width: 20 / 80 mm Max. circumferential speed: 35 / 80 m/sec Grinding spindle head (X-axis) Axis drive with linear motor - travel: 490 mm Measuring system: optical scale, resolution 0.0001 mm Tjdpfxsu R Nvuj Adljf Workpiece headstock (C-axis) Workpiece spindle speed range: 1 - 1,000 rpm Encoder measuring range - resolution: 0.0001 degrees Table (Z-axis) Axis drive with linear motor Measuring system: optical scale - resolution 0.0001 mm Machine dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Space requirement: approx. 7,500 x 5,000 mm Machine weight: 9,850 kg Accessories: CNC control Siemens 840 D Oil cooler Coolant system with treatment unit

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Tjdowm Elfspfx Adljf Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Condition: used, Year of construction: 2004, machine/vehicle number: 467-76, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 680 CNC Pin Grinder Tjdpfx Aexxx Rpedlsf crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Tjdpfx Asxl E Tqjdljf Subject to changes and errors in the technical data and information, as well as subject to prior sale!