Used Crate Washer for sale (1,843)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Cajdpfjfz Ax Ssx Aflea • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2025, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged. Cedpfx Aewck N Ioflsaa

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Cajdpfxjq Nf S Rj Afloa Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Csdoflpmqjpfx Aflsaa • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-800 • Type: Double Helix Screw Washer • Capacity: 80 ton per hour Cedpfx Afowclaboloaa • Dimension: 1750 x 8650x1900 mm • Screw Size: Ø 800x8000 mm • Motor: 2 x 15 kW Heavy duty Gamak • Water Consumption: 65-230 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Codpfx Afofzrapslsaa ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2025, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis. Cajdowt S Nkepfx Afloa

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Caedpfxefz A D No Afloa • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Saws and tools washing machine Rotatherm Cedpfx Afsxw H Tvsljaa

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Cjdpfx Afot Ul Exeleaa

Condition: used, This listing is for 1 of 2 Mikura Autura 1000 Microplate Washer Caodpjxzg Axjfx Afloa

Condition: used, From € 216,00 now for € 194,40. Now with a 10% discount. Casdpfjvyqw Isx Aflsa Pallet offer consisting of 72 used plastic stacking bins E1 meat crates 600x400x125 mm 25 liters. These meat crates are the standardized crates for the meat processing industry, also called pool “E” crates and can be used between temperatures of -30ºC to +80ºC. Equipped with a

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Cjdpsu Ixt Djfx Aflsaa

Condition: good (used), Technical specifications for the crate rack: Shelving system: Stow Type: Midirack Technical specifications for installation: Number of rack rows: 1 Rack length: 2,810 mm Number of bays per rack row: 1 Number of levels plus floor level: 6 The scope of delivery includes: 2x Shelf uprights, used Material color: Sendzimir galvanized Upright profile dimensions: 55 x 45 x 1.5 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled 2,000 mm high 600 mm deep Caedsv Hnt Hepfx Aflja 8x Shelf crossbars, used Material color: yellow Z-profile: 74 x 30 mm Hooks: 2 HK (hooks) Clear width: 2,700 mm 16x Safety pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental removal 4x Chipboard panels, used Thickness: 22 mm Width: approx. 2,680 mm Depth: approx. 590 mm Surface: coated if necessary (two-piece if necessary) 24x Used folding crate Manufacturer: Bekuplast Color: Gray Material: Polypropylene External dimensions: approx. 600x400x400 mm (LxWxH) Internal dimensions: approx. 555x360x385 mm (LxWxH) Handles: Open end / closed long side Weight: 3.41 kg per piece Your contact person: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, This listing is for a Agilent BioTek 405TS Microplate Washer. The unit is in full working condition and is ready for immediate release. Supplied with: (2) 4 Litre waste bottles Microplate Holder The BioTek 405TS Microplate Washer 405TSRSQ is a top-tier instrument designed to streamline the washing process for various assay types, particularly in cell-based assays, microsphere assays, and ELISA applications. Here’s a detailed overview of its key features and specifications: Key Features: Patented Verify Technology: This innovative feature automatically checks for any blockages in the manifold tubes before initiating a wash cycle, ensuring that each wash is effective and reliable, minimizing the risk of failed assays. Ultrasonic Advantage: This functionality automatically cleans any blocked manifold tubes, helping to prevent clogging and ensuring consistent performance across multiple wash cycles. Codpfx Afoxxx H Dslsaa High-Resolution Touch Screen User Interface: The intuitive interface allows for easy setup and control of washing processes for both 96- and 384-well microplates, enhancing usability and flexibility. Dual-Action Manifold: This feature enables independent control and positioning of the aspirate and dispense sections, allowing for precise liquid handling and optimized washing techniques. Optimized Cell Washing: Designed for gentle washing of loosely adherent monolayers, the washer operates at low flow rates with angled dispensing to protect delicate cell structures during the wash process. Biomagnetic Separation and Vacuum Filtration: These optional enhancements provide advanced washing capabilities, expanding the versatility of the instrument for various applications. Specifications: Wash Volume: Configurable from 25 to 3000 μL per well, accommodating a wide range of assay requirements. Microplate Types: Compatible with 96- and 384-well plates, including both low profile and standard height, as well as solid and filter bottom options. Fluid Pump Type: Utilizes a diaphragm pump, ensuring consistent fluid delivery and performance. Instrument Control: Managed through a local touch-screen computer software interface, simplifying operation and customization of wash protocols. Number of Reagents: Capable of handling 1 to 4 reagents, allowing for complex washing and assay procedures.

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Codpfxeu Ixkps Afljaa

Condition: good (used), Technical data for the shelving system: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays / shelf row: 01 pcs. á 994 mm Number of levels: 11 pcs. The scope of delivery includes: 02x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are pre-assembled 2,278 mm high 300 mm deep 11x shelf, used Material color: sendzimir galvanized Dimensions: 994 x 300 x 30 mm Weight per unit: approx. 3.18 kg 60x open fronted storage boxes, second-hand Manufacturer: SSI Schäfer Type: LF 221 GZW Color: red Design: recessed grip in the front Material: Polypropylene External dimensions (WxDxH): approx. 150x 235 x 122 mm Csdpfx Afjur Idrolsaa Internal dimensions (WxD): approx. 125 x 185 mm Usable height in stack: approx. 110 mm Stackable: yes Weight per unit: 0.220 kg 02x Side panel, used Designation: SWI 3422 Material color: sendzimir galvanized Dimensions: 2,275 x 175 mm 01x Cross brace, second-hand Designation: KV31013 Material color: sendzimir galvanized Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: like new (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x stacking box, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. Casdpfx Afehm Sllolea General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: as good as new (ex-display), total width: 1,060 mm, total height: 1,540 mm, Remark: - This is a II. Wahl product, new and unused. II. Choice means there may be dust deposits, minimal scratches or soiling may be present Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays per shelf row: 01 pcs. á 994 mm Number of shelves: 06 pcs. The scope of delivery includes: 02x shelf uprights, second choice (new) Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are unassembled 1,540 mm high 300 mm deep Remark: We are happy to pre-assemble the shelf uprights for you. Surcharge: 8.50 € | pc. plus 19% VAT. 06x Shelves, second choice (new) Article: ZB 4313 L Material color: grey Dimensions: 994 x 300 x 30 mm Weight / pc.: approx. 2,640 kg Max. load per shelf 100 kg with evenly distributed load 01x cross bracing, II. choice (new) Material color: sendzimir galvanized Cajdpjp T T Daofx Aflsa 24x open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 322 Color: yellow Design: Recessed grip on the back Material: Polypropylene External dimensions (LxWxH): approx. 434 x 209 x 200 mm Internal dimensions (LxW): approx. 291 x 181 mm Usable height in stack: approx. 185 mm Capacity: 10.4 liters Stackable: yes Weight per unit: 0.780 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: Casdpfjpl Tfwex Afloa These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are 80x stacking boxes, II.choice Manufacturer: SSI Schäfer Type: Traka 14-6 Material: Metal Surface: Ral 5002, ultramarine blue dimensions: 600x400x120 mm Casdpfx Afohm Sltslsa Weight: approx. 2,840 kg Further data / information: Hole pattern: 117 bottom + all 4 side walls staggered round perforation Ø: approx. 12 mm distance: approx. 14 mm hole center / hole center - with handles on both front sides - with folded edge Please note: These are stacking boxes II. Choice. There may be scratches, soiling or color defects may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 1.000x open fronted storage boxes, used Manufacturer: SSI Schäfer type: LF 511 G ZW Design: recessed grip on one side Groove: f. partition walls color: blue Material: polypropylene outer dimensions LxWxH: 500x156x143mm inner dimensions LxW: 448x123mm Useful height in stack: 127 mm Dimensions front wall opening: 85x60 mm (WxH) Capacity: 7.60 liters Stackable: yes Weight | pc: 0,785 kg Remark: These are used stacking boxes. There may be scratches, soiling and color defects may be present. Caedpfx Afon Dw Tyjlja Application: The open fronted storage boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical specifications for the shelving rack: Shelving system: SSI Schäfer Type: R3000 Technical specifications for installation: Number of shelving rows: 1 Shelf length: approx. 1,340 mm Number of bays per shelving row: 1 x 1,280 mm Number of levels: 11 Included in delivery: 2x shelf uprights, used Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Incl. bulkheads and base plates The uprights are pre-assembled 2,278 mm high 300 mm deep 11x shelves, used Material color: sendzimir galvanized Dimensions: 1,282 x 300 x 30 mm Weight | Quantity: approx. 4.79 kg 60x open-fronted storage boxes, used Manufacturer: SSI Schäfer Type: LF 321 GZW Color: red Design: recessed handle on the front Material: polypropylene External dimensions (W x D x H): approx. 210 x 340 x 145 mm Internal dimensions (W x D): approx. 180 x 290 mm Usable height when stacked: approx. 133 mm Stackable: yes Weight | Quantity: 0.560 kg 2x Sidewall, used Name: SWI 3422 Material color: Sendzimir galvanized Dimensions: 2,275 x 175 mm 1x Cross bracing, used Name: KV31013 Material color: Sendzimir galvanized Your contact person in our company: Codpfjur H Dksx Afleaa Mr.: Andre Evening Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: good (used), Included in delivery are: 10x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. Caodpfopl Tdgox Aflea small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. Cedpfx Aepl Tdnsfleaa General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.