Used Cross Cutting for sale (19,595)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm Bdsdpfxowypp Is Aczjk - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 6,537 h, laser source model: TruFlow 3200, laser power: 3,200 W, table length: 3,000 mm, table width: 1,500 mm, table height: 2,200 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Table height: 2,200 mm Laser power: 3,200 W MACHINE DETAILS Bdodpfexxt E Ujx Aczek Control: Siemens Laser model: TruFlow 3200 Dimensions & Weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours Beam on: 6,537 h Laser on: 39,930 h

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 68H1124, No minimum price – guaranteed sale to the highest bidder! Bdjdpfx Acexyfhwezsk By placing a bid, you commit to collecting the item by 31/12/2025!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1832.14, feed rate X-axis: 60 m/min, cutting height (max.): 160 mm, cutting width (max.): 360 mm, total length: 1,300 mm, total width: 1,300 mm, TECHNICAL DETAILS Max. cutting height: 160 mm Max. cutting width: 360 mm Max. feed speed: 60 m/min MACHINE DETAILS Machine dimensions (L x W x H): 1,300 x 1,300 x 1,700 mm Infeed table dimensions (L x W x H): 7,600 x 2,000 x 1,100 mm Bdedpex Ahc Aefx Aczjk Outfeed table dimensions (L x W x H): 6,300 x 2,100 x 1,050 mm EQUIPMENT Under-table cross-cut saw Automatic feed

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Bdsdpfx Aoxywupjczsk Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: excellent (used), Year of construction: 2016, Eisele Pressta 650E Vee Angle Cutting/Notching Saw with Eisele Pressta CNC Control Maximum Profile Height 320mm. Maximum Vee Cut Width 300mm. Maximum Vee Cut Height 260mm. Maximum Vee Cut Depth 210mm. Hydro Pneumatic Feed Rate, 2,800 RPM. (2) 3.0kW, 400 Volt Braked Motors. (1) 550mm Horizontal Saw Blade, (1) 650mm Vertical Saw Blade, Both With Swivel Range 30°, 90° & 45°. Pneumatic Vertical & Horizontal Profile Clamps. Compressed Air Inlet Connection R1/4", 5-7 Bar. (2) Spray Nozzles. S/No. 9592/2016. Bodpfx Acox Ah Hnozsdk With Eaton LS-S02-24-DFT Safety Interlock Switch. Dimensions Of Machine Approx 2,800mm x 1,900mm x 1,850mm High. Weight Approx 1,500kg. Power Supply 415 Volt, 3-Phase.

Condition: excellent (used), Year of construction: 2012, Ref: 11027 . 2012 Polar 115 XT Flowline Polar 115cm guillotine with paper handling system. Equipped with: Frequency controlled drive motor Variable speed back gauge Colour touch screen Automatic programming Memory Storage Capacity Variable pressure clamp for various stocks Chrome central air bed Bsdpfx Asxx Uuksczsdk Chrome side tables left & right with air 2 x Spare knives Knife changing device Rear Table Guard I.R. light beam guarding Accessories: 2012 LW1000-4 Lift 2012 RA-4 Jogger 1999 TR130-ER4 Downloader Specification: Cutting width, Max: 115 cm Clamp opening, Max: 16.5 cm Feed depth, Max: 115 cm Power required : 5Kw

Condition: used, Trumpf Trulaser 5040 Type L69 Flat Bed Fiber Laser Cutting Machine, Sheet Size 4000 x 2000mm, Trudisk 800i (FD25) Fiber Laser, L4221N0240, Riedel PC501 Chiller, Trumpf Loadmaster. S/No. N0014A0334, Trumpf Campfil MF8.6 Dust Collector, Riedel L o/5 TR3.26B Chiller, Trumpf 05.21.00 Operating System, Laser Capacity 8000W, Working Range 4000 x 2000mm (X & Y), Z Axis 115mm. S/No. A2251EO124 (2016) Bedpfx Asx Af Rweczodk Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Bsdpfx Acstwc Abjzedk Paper cutters fo pin feed available. We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Just let us know and we have the solution!

Condition: used, Year of construction: 2007, total height: 1,750 mm, total length: 1,000 mm, total width: 1,810 mm, Weight: 1.240 kg - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 100658 - Main motor power [kW]: 7.5 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 Bdodpfx Acewniuaezek - Power [kW]: 8.0 - Transport dimensions: 1000mm x 1810mm x 1750mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 13,000 h, machine/vehicle number: MP2512C1, sheet thickness (max.): 6 mm, working length: 2,500 mm, working width: 1,270 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time by 15/12/2025!  The machine has been regularly serviced by Amada. TECHNICAL DETAILS Punching working area X x Y: 2,500 x 1,270 mm Laser working area X x Y: 2,000 x 1,270 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Accuracy: ±0.07 mm Maximum material thickness: 6 mm Press force: 200 kN Max. strokes X-axis: 370 rpm Max. strokes Y-axis: 280 rpm Bodpfx Asxzf T Aeczsdk MACHINE DETAILS Power consumption: 22 kVA Machine weight: 18,000 kg Operating hours Laser hours: 13,000 h Punching hours: 17,000 h Note: Information regarding the tools can be found in the attached images.

Condition: excellent (used), Gerber Technology Industrial Taurus II Leather Cutter Automatic Cutting Machine Bdedpfx Acjx Ag Evozek Material Height Single Ply. Maximum Cutting speed 1.27 m/second. Cutting Acceleration 10.16 m/second. Table Height 0.82-0.85m. Canon Camera Height 2.8 To 5.5m. NOTE - A Loading Charge of £ 100 plus VAT (if applicable) will be added to the invoice. With Monitor, Keyboard, Mouse & Software.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original purchase price of the machine was approximately 870,000 EUR! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thicknesses Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y axis): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral repeatability of axis R: 0.025 mm Average bilateral positioning deviation of axis M: 0.05 mm Edge detection accuracy: ± 0.5 mm Bodpfexxklfex Aczsdk Workpiece Weight Maximum single workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Changeover Time Shuttle table change time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: fiber Consumption Total power consumption (incl. exhaust, chiller): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan Second high-pressure cutting gas channel Prepared for N2 generator Dust extraction system for internal installation Electrical cabinet position: top (mezzanine structure not included in scope of delivery) Note: The machine has already been dismantled, is stored, and is no longer under power.

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand TRUMPF This TRUMPF TruLaser 8000 was manufactured in 2012. A CO2 laser cutting machine featuring dual 3.6 kW power and a large working area of 2500x8000 mm. Consider the opportunity to buy this TRUMPF TruLaser 8000 CO2 laser cutting machine. Contact us for more information. Application Types Bedpfjx Aw Hwex Aczodk Cutting

Condition: excellent (used), Year of construction: 2007, Main Technical Specifications Specifications of the large plate to be processed (entry side): • Length min. mm 1500 max. mm 3000 • Width min. mm 400 max. mm 1600 Specifications of the processed piece (exit side): • Length min. mm 200 • Width min. mm 150 Drilling capacities: • Vertical drill heads no. 1 Bsdpfx Aexx Ugmjczjdk • Spindles per vertical drill head no. 1 • Maximum hole diameter mm 40 (50) • Maximum thickness that can be drilled mm 130 • Spindle rotation motor (a.c.) kW 19 • Spindle rotation speed with continuous adjustment from program RPM from 180 to 3000 Other Specifications: • Thickness of the large plate min. mm 10 max. mm 130 • Positioning weight max. kg. 5000 • Linear weight of the large plate max. kg/m 750 • Longitudinal transferring speed max. m/min. 30 • Cross positioning speed m/min. 30 • Working level’s height mm 850

Condition: used, Year of construction: 1986, total height: 1,550 mm, total length: 900 mm, total width: 960 mm, - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86/2528 - Main motor power [kW]: 5.5 Bdodpfewzcc Rsx Aczsk - Output table length [mm]: 600 - Voltage [V]: 380 - Current consumption [A]: 11 - Transport dimensions: 900mm x 960mm x 1550mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2016, Flow Waterjet Mach 2 CNC Water Cutting Machine Model 2-1313b With PC Based CNC Control Bjdsxvz Sdspfx Aczedk Table Dimension 1,300 x 1,300mm. Axis Travel 'X'=1,270mm, 'Y'=1,270mm, 'Z'=178mm. Intensifier Output 60,000 PSI. Motor 22 KW. Rapid Traverse 'X & Z'= 10,160mm/min. Contouring 7,620mm/min. S/No. 160031 (2016). With Abrasive Hopper, Intensifier Pump, Water Cooling Tank, Sick M4000 Safety Light Curtain Guarding, Quantity Of GMA Classic Cut 80 Abrasive Granules, Filters & Manuals.

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Weight: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6237 - Voltage [V]: 415 - Current consumption [A]: 20 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Bodpfx Aewnh N Neczsdk Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, HM-ZN 8500 undercutting saw Bsdpfjwnhz Sjx Aczjdk Serial number: 277 Connection Voltage: 400V- 6,6KW Weight: 1400 KG Saw blade max: 700mm Saw blade min: 600mm Bore: 30mm Saw blade tiltable Length automatic feed: 9500 mm Length output conveyor: 4300 mm Total dimensions: 15000x1500x1800 mm (LxWxH) - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total height: 1,750 mm, total length: 1,350 mm, total width: 1,350 mm, Price: On request Optimization cross-cut saw Stromab TR 500 Matrix 4 4000 Year of construction 2005 Engine power 10 hp Auto push-up system Inkjet printer - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 250143 - Main motor power [kW]: 7.5 - Max. saw width [mm]: 375 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 4300 - Output table length [mm]: 2000 - Transport dimensions: 1350mm x 1350mm x 1750mm (l x w x h) - Transport packages [pcs.]: 3 Bdedowq U Dxopfx Aczjk Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total height: 1,700 mm, total length: 1,500 mm, total width: 1,200 mm, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 263989 - Max. saw width [mm]: 380 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 14.5 - Power [kW]: 5.7 - Transport dimensions: 1500mm x 1200mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bdsdpfexdl E Rjx Aczok Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, total height: 1,600 mm, total length: 1,300 mm, total width: 1,350 mm, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 24.095.2 - Transport dimensions: 1300mm x 1350mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bsdewnilrspfx Aczjdk Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, - Year: 2002 Bedpfx Aownh T Ioczedk - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2001, Undercut cross-cut saw HM-D 6500-R Serial number: 319 Connection Voltage: 400V- 11KW Weight: 2450 KG Saw blade max: 550 mm Saw blade min: 500mm Bore: 30mm Length automatic feed: unknown Available from August 2024 - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 319 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Bjdpfx Aowng Sieczjdk

Condition: used, Year of construction: 2002, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No Bdsdpfx Aexzgrgeczok - Serial number: 388 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels