Used Cross Moving Table for sale (22,133)

Condition: used, Year of construction: 2000, with automatic stop The stop slides the material to be cut to the cutting position according to the entered measurement Saw blade: rising from below Maximum saw blade diameter (mm): 300 right long table: with automatically adjustable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length – 3550 mm, roller conveyor width – 310 mm Roller width (mm): 240 Roller conveyor and stop table: not separable Ijdpex Srrvsfx Addjtb Machine weight (kg): 80 without extraction system as shown

Year of construction: 1980, condition: used, machine/vehicle number: 30245035, The offer here is a double shear table. The machine dates back to 1980 and has a lifting capacity of 4,000 kg. The lifting table has a driven runway system and has the XYZ function (lifting, process, etc). The advantage of double scissors is that they can achieve a high operating stroke when space is limited. The dimension is 8. 20 m long and 1. 20 m wide. The conveyor belt has a width of 80 cm and 10 cm roll diameter. Itsdpfx Adogtmv Sjdsb

Condition: used, tank capacity: 1,850 l, GENERAL INFORMATION Equipment: Crane lugs Design: vertical Speed: 300 rpm Internal diameter: 1,178 mm Iodjxqahgopfx Addetb Total height: 3,350 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 4.0 bar Shaft seal: Mechanical seal with thermosyphon vessel Agitator: Cross-blade agitator Support type: Feet Location: Bremen Technical documentation: Drawing, TÜV papers Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,850 liters Double jacket volume: 100.0 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,500 mm VESSEL Max. permissible operating temperature: 100 °C Bottoms: Dished ends Number of feet: 3 HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: hermetically welded EQUIPMENT Manway / Dome: in top head (DN 400) Outlet: Clamp Note: Pressure marks on the insulation jacket Outlet: 40 mm AGITATOR 1 Agitator manufacturer: Stelzer Voltage: 230/400 volts Agitator arrangement: eccentric in the top head

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Itedpfou R Sycox Addob Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw Iodsu R Sypopfx Addstb - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Ijdpfsxiza Ujx Addstb

Condition: good (used), Year of construction: 1997, Under-table cross-cut saw Itjdpoxtwk Dofx Addeb max. cutting width: 800 mm max. cutting height: approx. 150 mm saw blade: 550 mm with 2 roller conveyors, the right one with stop and measuring scale

Condition: reconditioned (used), - Paul crosscut saw 15 AO - hydraulic saw stroke - 150 mm cutting height - 500 mm max. cutting width - 1 non-driven roller conveyor approx. 1,600 mm long Ijdpfx Aow Slgfeddjtb

Condition: used, functionality: unexamined, saw blade diameter: 500 mm, cutting height (max.): 160 mm, cutting width (max.): 430 mm, rotational speed (max.): 2,800 rpm, Two-hand control Roller table Iedpfx Adev Tcmusdotb Automatic safety and hold-down device

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m Itodpfx Aexvwcxjddsb X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Itjdpfxjtpgxio Addsb Diamter: 120 cm

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Itjdpou Tg I Dofx Addsb Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard Itodpfxovkt N Uj Addjb – module for wrapping the cover

Condition: used, functionality: fully functional, Year of construction: 2014, For Sale: Trolleys for moving heavy parts We are offering Trolleys for moving heavy parts. Good condition, fully operational. Two models are available: Ijdpfex Hicbox Addotb Model 1: 800X400 mm Quantity: 100 units Model 2: 600X400 mm Quantity: 60 units This equipment is ideal for warehouse and material handling applications. Condition: Good, regularly maintained Location: Autoliv Poland Sp. z o.o., Oława ul. Polna 49 Additional information and technical details are available at our premises. You are welcome to visit and inspect the truck on-site. Price should include logistics cost on customer side. Our proposal is 10 € / pc

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Itsdpfjvuk Uiox Addob

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Itjdpfjd Ecncjx Addeb Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm Itjdpfjfv Hphox Addob cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Table size:1500x1500mm Capacity : 6t Itsdofvqmxopfx Addeb Dimension: 1600x2500x2000mm Hydraulic

Condition: used, Roller conveyor with chain cross conveyor Isdpsi Sdk Sofx Addetb Can be used after resaw. - Electric motor: 1,1 kW - Electric motor: 0,75 kW - Electric motor: 1,1 kW

Condition: used, Outfeed table before resaw IDL000793 Itsdpfxsul Rgvo Addjb

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Iodpfx Ajtddw Aoddetb Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm Itodsu Smq Sepfx Addeb - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1110013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,500 mm, table load: 6,000 kg, spindle diameter: 110 mm, TECHNICAL DETAILS Itodpfjx I A D Uex Addjb X-axis travel: 2,000 mm Y-axis travel: 1,600 mm Z-axis travel: 1,500 mm Drilling spindle diameter: 110 mm Clamping surface of the table: 1,250 x 1,600 mm Table load capacity: 6,000 kg MACHINE DETAILS Control: Heidenhain TNC 426M Note: The tools shown in the images are not part of the sale or included in the scope of delivery.

Condition: good (used), Year of construction: 1990, Lumsden 92ML Rotary Surface Grinder 48" Magnetic Chuck Year 1990 - Latest ones made Segmental wheel diameter - 711mm / 28" Segments per set - 12 Table diameter and grinding capacity - 1219mm / 48" Isdpfxjvwc I Ho Addjtb Max height of wheel to table - 572mm / 22.5" Min height of wheel to table - 114mm / 4.5" Max height of wheel to magnetic table - 457mm / 18" Spindle speed 550rpm Table speeds - 18 & 6 rpm Automatic feed 10 rates - 0.1 - 1.0mm/min (0.004 - 0.040 ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 50-75hp at 960rpm Table motor - 6 /.5hp at 1440/480rpm Feed motor - 0.25hp at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3048mm Floor space 4394 x 3353mm Weight approx 12,200kgs / 12ton

Condition: good (used), functionality: fully functional, rotary table diameter: 650 mm, table diameter: 650 mm, Glauchau Horizontal Spindle Ring Grinder Itedoxxyvmspfx Addeb With 650mm dia. Magnetic Chuck