Used Cross-Léger for sale (4,286)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bedpfx Aozp H R Eem Tswr Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m and more Leveling accuracy at 5 m: +/- 1 mm Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Bodpjd Ecncofx Am Towr Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Bwjdpfxjfv Hphs Am Tor Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine Bedpfx Amedy Hrde Tjwr A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system Bwodjzmxvzjpfx Am Ter - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp Bwedoznu Agepfx Am Tor -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes -Type: Size 50/25 mm -Submission/Price: complete -Dimensions: 135/65/H65 mm -Weight: 0.6 kg/pc.

Condition: used, Robust cross-conveyor for round timber For sale is an extremely robust cross-conveyor for logs, taken from a professional sawmill operation. Features: Heavy-duty industrial design Double chain conveyor Short conveying distance Bwsdpfezq T Adsx Am Tor Fast and reliable transport of round timber to the log carriage Solid and durable steel construction Immediately available The system is in good, functional condition and can be inspected under power by appointment. Please submit a fair and realistic offer.

Condition: used, Year of construction: 2016, total height: 1,600 mm, total length: 14,100 mm, total width: 1,600 mm, Colour: Grey Bsdpfx Amswnh N Nj Towr Weight: 2.500 kg - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 6237 - Max. saw length [mm]: 6500 - Max. saw width [mm]: 400 - Max. saw height [mm]: 135 - Max. saw blade diameter [mm]: 500 - Arbor saw blade diameter [mm]: 30 - Input table length [mm]: 6700 - Output table length [mm]: 6000 - Options: Automatic pusher system - Voltage [V]: 415 - Current consumption [A]: 20 - Transport dimensions: 14100mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2016, chainsaw equipped with a chain sharpener, chain feed mechanism, and output with ejectors high-speed chainsaw Bwedpfx Aezb Rhmsm Tsr

Condition: used, Year of construction: 1995, preparation mat infeed mat recovery transfer Bodpfx Aezhrc Rjm Tjwr GRECON Opticut 350 chainsaw

Condition: used, Hüllhorst double miter saw in good, used condition. The miter angle cannot be adjusted on this machine. Year of manufacture unknown. Bwsdozpfk Rjpfx Am Tor The double miter saw has been used reliably for many years in the production of moldings and is still connected to the power supply. The machine is being sold as part of the liquidation of our carpentry business. Collection price – delivery possible upon request. The sale is made excluding any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, limb, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm Bwodpfx Aezrnt Hjm Tsr - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Condition: new, Year of construction: 2026, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Bwjdpjiy Ry Aefx Am Tjr Cutting width at 45°: 295 mm Miter range, horizontal: 45° - 90° - 25° Miter range, vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Rotational speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Weight: 490 kg

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Bwodpfx Amsyw Tzij Tor

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Bwodpow Hl Aqefx Am Ter Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: good (used), Cross support, cross support, cross table, cross-sliding table -Manufacturer: Kunzmann, top head from milling machine type UFV 600 Bwodpfxjg Dg Rpo Am Tsr -Dimensions: 530/420/H730 mm -Weight: 80 kg

Condition: good (used), Cross table, cross-sliding table, clamping table, clamping plate with T-slots, clamping angle -Cross table for lid type: KF12 -Table surface: 400 x 400 mm Bodpfxob A Ix Es Am Tjwr -Travel path: x 50 mm/y 65 mm -Weight: 60 kg

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm Bedpstrhm Asfx Am Towr -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Condition: good (used), Drilling machine, bench drill, pillar drill, column drill, box-type drill, tapping machine, threading machine -Manufacturer: Strands, MK3 bench drill with cross table Demanders -Motor: 0.75/1.0 kW -Speeds: 100 - 30200 rpm, 8-stage forward/reverse rotation -Thread cutting device: via foot switch -Table size: 500 x 195 mm -Cross table travel: X360 mm Y160 mm Z440 mm -Spindle mount: MK3 -Spindle stroke: 135 mm -Protrusion: 255 mm -Dimensions: 780/800/H1540 mm Bwodpfx Aoy Rx Egom Tjr -Weight: 218 kg

Condition: good (used), Thickness gauge, coating thickness gauge, Cross Hatch Cutter Bsdpfjr H Nlhox Am Towr -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 -Material: stainless steel / aluminum -Accessories: see photos -Dimensions: 300/270/H75mm -Weight: 1.1 kg

Condition: good (used), Linear bearing, linear rail, linear guide, roller guide rail, guide rail, crossed roller guide -Manufacturer: Schneeberger, Cross roller guide type 9700 -Hole spacing: 100 mm M8 -Quantity: 4 pieces -Price: per piece -Dimensions: 705/22/H45 mm Bwsdpfjlb Iwbjx Am Tsr -Weight: 4.5 kg/pc.

Condition: good (used), Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos Bodpfjqgi Ihjx Am Tjwr -Dimensions: 750/550/H445 mm -Weight: 35 kg

Condition: used, Controlled cross table, cross sliding table, clamping table, clamping plate with T-slots, clamping angle, cross table NC, linear robot, coordinate table Bsdpjhtn Sbofx Am Tjwr -Controlled cross table: was used as a soldering station -Manufacturer: Walko, cross table NC type PNC 500 -Table surface: 600 x 300 mm -Travel approx.: X 500 mm / Y 350 mm -Dimensions: 1050/1030/H1530 mm -Weight: 240 kg

Condition: good (used), Industrial Robot, Robot, Robotics, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Berger Lahr, robotics robot cross table -Servo motors: SER397/4L3SS0TO 3 pieces -Linear units: LM-A504KT100-250 / LM-H404K-700-LW230 / LM-P404KT100-1200 -Individual components: see photos -Traverse paths: x=670 / Y=360 / z= 1260 mm -Total dimensions: 1405/590/H1650 mm Bwsdpfx Asi I Hdcjm Tjr -Weight: 74kg

Condition: good (used), Cross knife for meat grinder, robot knife -Cross knife: Robot knife 8 blades -Type: WK400 -Recording: 95 x 65 mm -Wolf size: WK400 -Material: knife steel -Dimensions: Ø 375 x 60 mm Bwedpfx Amovwl Rws Tjr -Weight: 9,4 kg