Used Cutting Torch for sale (14,486)

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. Gedpfjztmzxsx Aqieuf With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Gujdpfxsztmzre Aqiof Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, Manufacturer CONDUX Model CS 450/600-2 Hollow body granulator and secondary granulator for pre-shredded material Rotor: 450 mm diameter x 600 mm working width 5 rotor blades (angled cut), 2 stator blades Guodpoztmzfjfx Aqiof Drive motor 22 kW

Condition: used, power: 7.5 kW (10.20 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Gjdoztmy Uepfx Aqiouf Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Cutting mill Gjdjztmy Iopfx Aqisuf Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Gjdpfxeztmynj Aqijuf Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Drive motor 110 kw Folding device with electric winch

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW Gjdpfx Aoztmyhjqieuf

Condition: used, Cutting mill / Cutting mills Godpfx Aeztmwyjqieuf Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Granulator / Granulators Gujdpfxjztmvvo Aqiof Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Guedjztmvpopfx Aqijf Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Gedpfoztmviox Aqiouf Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Gsdsztmvcopfx Aqieuf Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Gsdpfx Aqjztmu Ejieuf Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, compressed air connection: 10 bar, overall weight: 11,700 kg, total length: 9,229 mm, total width: 6,145 mm, total height: 2,200 mm, Equipment: CE marking, documentation/manual, dust extraction, emergency stop, safety light barrier, We offer this used TRUMPF TruLaser 3030 laser cutting machine, manufactured in 2007. Laser power: 3200 W Machine no.: A0220A1818 Year of manufacture: 2007 Gusdpfxezt I U Hj Aqijf Power supply: 400 V / 50 Hz Connected load: 73 kVA Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1986, condition: used, functionality: fully functional, We are offering this used Fecken-Kirfel G1 band splitting machine, manufactured in 1986, for sale. Manufacturer: Fecken-Kirfel Machine type: G1 band splitting machine Model: G1 Year of manufacture: 1986 Condition: used Length: 4,500 mm Width: 1,200 mm Guodpsztmybjfx Aqief Height: 1,400 mm Working width: 800 mm Weight: approx. 3.5 t The machine is being sold due to the purchase of a new machine and is in working order. If you have any questions or require further information, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1992, Paper cutting machine, Polar 115 EM. Manufactured in 1992. Programmable control, monitor, air table, and light barriers. Guedpfx Asztqnvjqief

Condition: like new (used), High volume production of small components including stair wedges, stair glue blocks, corner blocks for chairs, filler pieces, and more. Key Features: Self centring grippers and centreline cutting with angles of +/-60 degrees. Hopper fed with a standard length capacity of 1350mm - components are collected in box underneath. Produce up to 800 pieces per hour. Small footprint to maximise floor space. Condition - As New [only been used for showroom demonstrations.] 1350mm x 200mm x 80mm Capacity Cutting thickness from 10mm to 80mm Cutting width from 10mm to 200mm 3 seconds per operation - feeding, cutting & drilling = 9 seconds Up to 60m/min advancement speed 4kW saw motor +/- 60 degree rotation - mechanical adjustment Completely enclosed interlock saw cabin Outfeed conveyor belt Gusdpfx Aqezd Uxmeiof

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg Gsdozn Iqkepfx Aqieuf

Year of construction: 2007, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology Godpfx Aqjzn H Syeieuf -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-SOLO -Drive motor: 2.2 kW -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg - Year: 1999 Godpszmxvzofx Aqisuf - Documentation available: No - CE certificate present: No - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 510740, total width: 5,900 mm, total length: 3,760 mm, overall weight: 4,000 kg, input current: 33 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, cutting length (max.): 3,700 mm, Glaston Bavelloni 370 S Lamy table Serial Number: 510740and wir diagr nr: 9500750300 Voltage:400v -Power 43.2kw - lcc max: 10ka -50Hz - IA: 33A Weight +/- 4000kg Glasthickness 3/3 till 10/10 Gujdpfx Aqju D Nameisf

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Guodpfx Aowvpcmoqief Crafted with care for eco-friendly design Equipped with zoned dust extraction Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, laser type: fiber laser, laser power: 80,000 W, table length: 31,500 mm, table width: 6,300 mm, travel distance X-axis: 4,050 mm, travel distance Y-axis: 25,050 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 55,000 kg, total length: 34,000 mm, total width: 12,000 mm, Equipment: cooling unit, safety light barrier, Working area (mm) : 26000×3500（Bevel cutting：25500×3000） Gsdpfx Asv E Hwzjqieuf X axis travel distance (mm): 4050 mm Y axis travel distance (mm): 25050 mm Z axis travel distance (mm): 450 mm X/Y axis positioning accuracy : ±0.03 mm/m X/Y axis repeat positioning accuracy: ±0.02 mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2 G It can support cutting of various groove types such as V, Y, X, etc., with a maximum groove of ±45° and one-time forming, reducing the number of beveling processes, reducing costs and increasing efficiency.

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW Gusdpeyr Tlcofx Aqijf The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Stator blade rows: 2 Gjdpfjyr Tmasx Aqieuf Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm