Used Duro for sale (30)

Condition: good (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,200 mm, total length: 3,200 mm, total width: 2,400 mm, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 18,000 W, 5-axis CNC machine (VMC) MIKRON - UCP 800 MACH-ID 9640 Make: MIKRON Type: UCP 800 Control: HeidenHain iTNC530 X - Travel: 800mm Y - Travel: 650mm Z - Travel: 500mm A - Axis: +120 to -100° B - Axis: 360.000° Table Length: 600mm Table Width: 600mm Table load: 500 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 18kW Speeds / ranges: 20000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3200mm Width: 2400mm Height: 3200mm Weight: 10000kg Dcjdpfxozkry Is Abbok Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck Djdpfxjv Tlrys Abbock -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg

Condition: used, RÖHM 3-Jaw Chuck, Used Dsdpfx Aswm D Rtobbock Type DURO-T315 - without jaws -

Condition: used, Technical details: diameter: 260 mm width: 125 mm weight of the machine approx.: 50 kg revolution per minute: 4700 U/min Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Djdpfxou Nlius Abbeck Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm *

Condition: good (used), 3-jaw power chuck with safety pin RÖHM Duro 400 Diameter 400 mm Spindle mount DIN 55027 size 11 Weight approx. 105 kg Djdpfx Abowxprtsbjck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2018, operating hours: 4,231 h, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, overall weight: 11,000 kg, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm C-axis swivel range: 360° Tool interface: HSK-E63 Djdpfxozf E I Io Abbsck MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle types: NCD 150 PL, NCD 200 PL Operating hours, control ON: 30,064 h Operating hours, machine ON: 10,322 h Operating hours, program execution: 4,159 h Operating hours, drives ON: 7,331 h Operating hours, spindle ON: 4,231 h Dimensions & Weight Dimensions (L x W x H): 3,400 x 3,000 x 2,800 mm Total weight: 11,000 kg EQUIPMENT Chip conveyor Coolant system with filter system Documentation available

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 9,100 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 12,000 W, number of axes: 3, This 3-axis MIKRON VCP 800W Duro was manufactured in 2004. It features a Heidenhain iTNC 530 control system, with X, Y, Z travels of 800 mm, 650 mm, and 500 mm respectively. The machine includes a high-velocity spindle capable of 20,000 rpm and a 30-position tool magazine. Ideal for precision machining, consider the opportunity to buy this MIKRON VCP 800W Duro vertical machining centre. Contact us for more information about this machine. • Tool interface: HSK-A63 • Tool magazine: 30 positions Additional equipment Dcjdpfx Ajyglh Eobbok • Chip conveyor • Complete set of tool holders and tools (as shown in photos) • BILZ ThermoGrip shrink-fit system with CoolDown (induction device for mounting/dismounting tools in shrink-fit holders; manufacturer: BILZ)

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Dodpoxpqz Uofx Abbjck Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Djdpfsxcbmhex Abbjck Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: excellent (used), functionality: fully functional, mileage: 14,769 km, power: 110 kW (149.56 HP), color: white, first registration: 04/1998, chassis manufacturer: Bucher, total length: 6,000 mm, emission class: euro2, overall weight: 5,900 kg, empty load weight: 4,100 kg, Year of construction: 1998, Equipment: all wheel drive, differential lock, full service history, parking heater, power assisted steering, TÜV (roadworthiness inspection) will be newly performed. Truck registration. The Bucher is in an almost new condition, coming directly from an official authority (Army). It has been excellently maintained and has a complete service history—see attached photo. The bodywork is in good used condition. The Duro is equipped with: automatic transmission, all-wheel drive, differential lock, 2 front seats, tire size 10.5R20, fully automatic ZF transmission. The unladen weight is 4,100 kg, gross vehicle weight is 5,900 kg, displacement 3,747 cm³, 24-volt electrical system. Upon delivery, the Bucher not only comes with TÜV but also runs reliably. :-) The Duro is ideal as a hobby vehicle, but also well suited for daily work use. All my vehicles are listed on my homepage. Why drive back and forth from Flensburg to Berchtesgaden to view various vehicles when you can find over 150 vehicles of the following types here: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, DB, etc.—all with TÜV as well. Plus, there's an incredible selection of spare parts and accessories. Why settle for less? Give me a call. Best regards, Philipp from D_MAX (Titans of Steel). Dcodpsyhm T Sofx Abbjk

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 107.44.00.072, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 20 m/min, workpiece weight (max.): 500 kg, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron UCP 800 Duro – 5-axis CNC machining centre Dcedpfxjwww Rho Abbok We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro from the renowned Swiss brand GF Machining Solutions. The machine is perfect for machining complex parts, moulds, dies, and components that require the highest precision and surface quality.

Condition: new, We are selling a 200L drum of Diversey EnduroSuper VE3L cleaner. Dcjdszfwmpspfx Abbek The drum is still sealed.

Condition: used, functionality: unexamined, Test height 320 mm Projection 150 mm Dcodpfx Aeuihh Rjbbek

Condition: used, Year of construction: 2008, OMAX 60120 P3060V 30HP (22kW) 4100 Bar EnduroMAX - machine including crank pump 30HP (22kW) 4100 Bar EnduroMax - working table 3656 mm x 1956 mm - X - Y axis travel 3200 mm x 1575 mm Dsdpfetmp T Dox Abbock - air cushion (allows material to be cut while submerged) - control computer compatible with Windows 10 and OMAX Layout&Make Premium software - premium software - integrated diamond orifice head - OMAX 300kg abrasive feeder Full overhaul of the machine performed in 2024 (year of production 2008) Possibility to equip the machine with additional accessories for an extra charge.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0032703, Accessories: - Reference plate 63.3 HRC - Reference plate 58.5 HR30N - Test weights 150, 100, 60, 45, 30 kgf - Preload weight - V-anvil - Spirit level - Diamond indenter - Steel ball indenter 1/8" - Steel replacement balls 1/8" - Dust cover - Operating manual Dcjdex E U U Hopfx Abbek The diamond indenter is slightly damaged below the tip (minor chipping – see photos).

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm MACHINE DETAILS Dimensions & Weight Dcjdpfx Aexuqh Ssbbek Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: as good as new (ex-display), Year of construction: 2026, throat depth: 320 mm, total height: 620 mm, total width: 840 mm, total length: 850 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 200 kg, height adjustment type: mechanical, DuraVision 30 G5 small load/macro hardness testing machine for Brinell, Rockwell, and Vickers testing, conforming to standards according to EN ISO and ASTM, as well as carbon testing according to DIN. Torsionally rigid gray cast iron base for the main load range 3 kg - 3,000 kg (29.43 N - 29,420 N) PLC measuring and control electronics for monitoring the application of the load with automatic test load change and manual table height adjustment via handwheel 12MPix color camera for 3-stage zoom Motorized pivoting 3-position turret incl. 1 objective lens and 1 indenter adapter Removable clamping jaws with clamping inserts enable unclamped and clamped testing Test height 0 - 400 mm, outreach 320 mm Specimen table, support diameter 90 mm Maximum specimen weight 200 kg High-performance LED incident lighting Capacitive 10" touch display with LED backlight Integrated PC with Win 10 IoT 64-bit and 128 GB SSD storage Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 ecos Workflow Touch Basic operating software incl. 1 test method ecos IMAGE for fully automatic, standard-compliant image analysis of Vickers, Knoop, and Brinell Automatic brightness control and autofocus with statistics and test report function ecos templates for frequently used settings ecos CODE for reading and creating QR codes ecos EXPORT EDITOR for individual customization of the export data (format: PDF, Excel, XML, CSV) User management for individual customization of access rights in ecos Workflow Touch ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Note: An additional hand scanner is required to read a QR code (not included in the scope of supply). NKW28E05Z Ball holder 28 mm length, diameter 6.5 mm with 5 mm ball press-fitted in with certificate (EN ISO) NKW28E10Z Ball holder 28 mm length, diameter 12 mm with 10 mm ball press-fitted in with certificate (EN ISO) L25HBDVG5 Objective lens 2.5x with Brinell SmartLight evo incl. adapter for turret for better evaluation of Brinell indentations (for DV 20/30/200/300/250/350 G5) Z46ZR Base / tool cabinet ZRG for seated and standing use max. specimen weight 500 kg Dimensions (WxHxD): 840 mm x 620 mm x 850 mm Maximum load / drawer: 10kg Best regards Dodpfxjzfnpbo Abbjck

Condition: used, Year of construction: 2021, operating hours: 25 h, functionality: fully functional, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH and IRHD on composite materials, soft-elastic materials, elastomers, plastics and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex and concave geometries of composite materials, soft-elastic materials, elastomers, plastics and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Modularly expandable Interchangeable measuring devices enable a simple change between the numerous measurement methods in the areas of Shore, IRHD and VLRH without tools and with only a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratory, production, quality assurance and development when testing a broad product portfolio. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave or convex geometries, you will receive exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples thanks to its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which gives you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Dcjdozn I Ucjpfx Abbsk Manually operated positioning device available as an accessory for the measurement of individual test specimens for the digi test II and the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of any type to be clamped and fixed for measurement.

Condition: used, Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable test geometries. Standards: • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement methods: • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. This modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a broad product portfolio and to ensure quality standards. Dcodpfx Aozn I Tfobbjk Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with only a few steps. Due to the wide range of positioning and measuring devices offered, the digi test II is the right choice for the laboratory, production, quality assurance, and development when testing a broad product portfolio. Many shapes – one solution The modular expandability of the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measuring positions. Secure measurement results without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measuring position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not just measure the hardness of your test specimen, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually adjustable positioning device, available as an accessory for measuring individual test specimens for the digi test II as well as the Gelomat. Modular attachments on the Centrofix allow samples and molded parts of all kinds to be clamped and fixed for measurement.

Condition: like new (used), Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: Digitest II, DIGI TEST II Modular hardness testing system for fully automatic hardness tests according to Shore, VLRH, and IRHD on composite materials, soft-elastic materials, elastomers, plastics, and foams with variable testing geometries. Standards • ASTM D2240 • ASTM D1415 • DIN EN ISO 868 • DIN ISO 48-2 • DIN ISO 48-3 • DIN ISO 48-4 • NFT 46-003 • TD 00002001 • TD 00002002 • Measurement method • Shore A • Shore A0 • Shore D • Shore 0 • Shore 00 • Shore 000 • Shore 000S • Shore E • Shore B • Shore C • Shore D0 • Micro Shore A • Micro Shore D • Shore AM • Shore M • IRHD L • IRHD N • IRHD M • IRHD H • VLRH Application areas Flat, inclined, convex, and concave geometries of composite materials, soft-elastic materials, elastomers, plastics, and foams. The digi test II enables precise and user-independent hardness measurements on elastomers, polymers, soft-elastic materials, composite materials, and foams. The modularly expandable measuring system is used in research and development as well as in production and quality control to determine the material hardness of a wide range of products and to ensure quality standards. Dcjdozn I N Hjpfx Abbok Modularly expandable Interchangeable measuring devices allow for easy switching between the numerous measurement methods in the areas of Shore, IRHD, and VLRH without tools and with just a few steps. Thanks to the wide range of positioning and measuring devices offered, the digi test II is the right choice for laboratories, production, quality assurance, and development when testing a wide range of products. Many shapes – one solution Thanks to its modular expandability, the digi test II enables the measurement of all sample geometries. Whether you want to perform measurements on flat, inclined, concave, or convex geometries, you will obtain exact measurement values from a sample thickness of 0.7 mm thanks to the approach system. ROTOFIX FOR DIGI-TEST II Positioning device available as an accessory for the automatic measurement of a different number of samples and measurement positions. Secure measurement values without user influence In addition to perfect alignment as a table unit, the Digi-Test II ensures the optimal measurement position of the test samples through its numerous positioning devices. The most accurate measurements without user influence and manual pre-setting are guaranteed, which saves you time for the important things. Comprehensive analysis through various measurement methods Do not only measure the hardness of your test piece, but also the flow curve of the material during the test. With the option for hysteresis measurements, the Digi-Test II provides additional insights into the characteristic properties of the material. CENTROFIX Manually operated positioning device available as an accessory for measuring individual test specimens for the digi test II and the Gelomat. Modular attachments for the Centrofix can be used to clamp and fix samples and molded parts of any kind for measurement.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Djdpfxszg Tyuj Abbjck Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: excellent (used), Wittmann Battenfeld Type: SmartPower 210 Wittmann Battenfeld injection molding machine with UNILOG B8 control For use with thermoset materials Current software version: IO4.26 The machine was serviced/inspected and brought up to the most current possible standard by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in 2026. In addition to the pressure switches already present, the machine can be equipped with two additional mold internal pressure switches (Kistler module for mold internal pressure switching, range 1: 20,000 pC, range 2: 10,000 pC). The parts for the mold internal pressure switch upgrade are included in the scope of supply. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: 137949-100 Machine weight, gross/net Main dimensions of the machine Noise level (DIN EN ISO 3744-46): 65 dB(A) Ambient temperature: +15 - +40°C (+59 - +104°F) Year of manufacture: 2017 Operating hours: 1437 hours Hydraulic system: Hydraulic oil, tank capacity Oil temperature min / max. (HLP 32): min 30°C (86°F) / max. 40°C (104°F) Oil temperature min / max. (HLP 46): min 40°C (104°F) / max. 50°C (122°F) Switching temperature for oil cooling (HLP 32): 35°C (95°F) Switching temperature for oil cooling (HLP 46): 45°C (113°F) Electrical system: Drive power, hydraulic pump: 37kW Motor voltage Frequency Water system: Oil cooler: Cooling water consumption: approx. 0.5 - 1.5 m³ / h (0.65 - 1.96 cu yd) Cooling water inlet max. 35°C (95°F), NW ⅜" Cooling water battery: Cooling water inlet ∅ ¾", max. 10 bar (max. 145 psi) Cooling water outlet ∅ ¾" Number of heating zones including nozzle: 5 Closing unit: SmartPower 210 Clamping force: 2100kN Djdpfxezdywne Abbock Type: SmartPower 210 Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2006, Wolpert 930, year of manufacture 2006 Dsdpfx Ajx N Ry Hobbock

Condition: excellent (used), Wolpert DIA TESTOR 7521 Dodpsx N Rw Esfx Abbjck

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Dcedpfx Aex N Rvnobbjk