Used Damatomacchine Lathe for sale (5,254)

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Gsdpfew Hl Adsx Akheui Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2008, turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, total height: 6,700 mm, total width: 6,300 mm, total length: 9,300 mm, rotary table diameter: 2,000 mm, spindle speed (max.): 200 rpm, table diameter: 2,000 mm, travel distance X-axis: 1,835 mm, travel distance Y-axis: 1,000 mm, workpiece diameter (max.): 2,400 mm, overall weight: 48,000 kg, Equipment: documentation/manual, X Stroke 1835 mm Z Stroke 1000 mm Table load 20 Ton Ram size 230 x 230 mm   Stroke crossrail 800 mm  Stroke crossrail in 5 steps each 200 mm Live tools 2000 Rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360.000   Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Max. turning Ø: 2400mm Table Ø: 2000mm Gujdpfxov R Di Ss Akhei ATC / revolver: 18 Speeds / ranges: 200Rpm Power: 48kW Maximum turning height:1500mm C-Axis: 360000° Length: 9300mm Width: 6300mm Height: 6700mm Weight: 48000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Gjdpjxc In Sefx Akhjui Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: used, Year of construction: 1999, turning diameter over bed 330 mm turning diameter over slide rest 195 mm turning length 750 mm center height over bed 160 mm centre distance 650 mm digital readout 3 Achsen HEIDENHAIN bed width 205 mm spindle bore 36 mm spindle taper KK5 DIN 55027 turning speed range 48 - 2500 U/min power requirement 3,0 kW 4-jaw-chuck diameter 160 mm quick change toolholder MULTIFIX Typ A Gjdpfxjzy Sb Dj Akhjui taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 100 mm voltage 400 V total power requirement 3,2 kW weight of the machine ca. 680 kg dimensions of the machine ca. 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control Gujdezd S S Repfx Akhsi 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: R0285, spindle bore: 70 mm, total length: 3,350 mm, total width: 1,550 mm, type of input current: three-phase, spindle motor power: 15 W, overall weight: 4,000 kg, workpiece diameter between centers: 290 mm, workpiece length between centers: 1,500 mm, CNC Lathe MONFORTS KNC 5 – 1999 For sale, a MONFORTS KNC 5 CNC lathe, year 1999, in very good overall condition. Ideal for precision turning operations, the manufacture of individual parts, as well as small and medium production runs. Technical specifications Brand: MONFORTS Model: KNC 5 Year of manufacture: 1999 Condition: Very good Color: White Weight: 3,300 kg Motor power: 15 kW Numerical control: Monforts Control System MTC K Programming: By teach-in Documentation: Available CE marking: Yes Machining capabilities Distance between centers: 1,500 mm Center height: 250 mm Maximum turning diameter above the bed: 500 mm Maximum turning diameter above the cross slide: 290 mm Spindle bore: 70 mm Spindle speed: 2 to 2,800 rpm Included equipment 3-jaw chuck FORKARDT F+250 Collet chuck, see photo Soft jaws and reversible jaws, see photo Technical documentation Dimensions and transport Length: 3,350 mm Width: 1,550 mm Height: 1,800 mm Total weight: 3,300 kg Additional information Machine in very good condition Price shown excludes VAT – VAT is recoverable for eligible professionals, subject to applicable conditions. Machine can be viewed by appointment in Sprimont, Belgium. Godpj Agvttjfx Akhjui For any further information or to arrange a visit:

Condition: new, Maximum turning height: 315 mm Turning diameter over the bed: 630 mm Turning diameter over the cross slide: 430 mm Turning diameter in the chuck: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle fitting, DIN 55027: Size 11 Bed width: 400 mm 21 speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev Feed range, transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4“ 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 pitch Tailstock fitting: MK 5 Tailstock quill travel: 230 mm Tailstock quill diameter: 75 mm Drive power: 11 kW Dimensions L x W x H: approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital read system, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool holder system “Multifix”, Size C • Powerful main drive with 11 kW • Large spindle bore, Ø 103 mm • Traveling steady rest • Fixed steady rest, small • Fixed steady rest, large • Chuck • Rapid traverse in longitudinal and transverse direction • Electrodynamic brake • Coolant system • Machine light • Quick-change device for the tailstock • Bed stop • Protective shield, rear, full length • Tool holder protection • Chuck protection, electrically secured • Lead and feed screw protection • Interchangeable gears • Fixed center for the spindle • Reducer sleeve for the spindle • Two colors: top light gray RAL 7035, bottom blue RAL 5015 • CE compliant Delivery time: approx. 2 months after order placement Delivery: ex works, manufacturer's plant in Bulgaria, free on board (FOB) truck Warranty period: 12 months, with single-shift operation (8 hours) Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Gsdpfx Ajk Dpxlokheui DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D Gusdpfovb Hlwsx Akhei 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: used, Year of construction: 1998, turning diameter max. 250 mm turning length max. 900 mm control FANUC SERIE 0-T turning spindle Durchlass 75mm chuck diameter 250 mm turning speeds 0-3700 U/min transmission ratio 2 tool numbers 12 feed speeds X/Z 15/20 mm/min quill stroke 100 mm Gusdpoucgxusfx Akhsi diameter of quill 110 mm tool adaptor MK 4 coolant tank 130 l weight - pallet system 5500 kg

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Swinging diameter: 520 mm Swinging diameter over cross slide: 400 mm Swinging diameter in the chuck: 1,000 mm Turning length: 1,250 mm Godsz S Euajpfx Akhsui Spindle Spindle speed range: 11.2–1,120 rpm Performance data Total power consumption: 7 kW Machine weight: approx. 3.8 t Dimensions Space requirement: approx. 2.7 × 1.7 × 1.7 m EQUIPMENT 4-position tool holder with quick-change inserts Digital display

Condition: ready for operation (used), Year of construction: 2012, overall weight: 6,000 kg, CNC capacity 2000x800mm Gedpfx Akj Ahq Dxsheui spindle bore 106mm total power 45kW weight 6000kg

Condition: used, Year of construction: 2020, operating hours: 19,485 h, spindle speed (max.): 5,000 rpm, overall weight: 10,000 kg, CNC Lathe Manufacturer: DMG MORI Model: SPRINT 65 2T Year of manufacture: 2020 Control system: Siemens 840D sl Operate Gueds Advfxopfx Akhoi Technical details: Spindle speed: 5,000 rpm Number of tool stations: 2 x 12 Machine weight: approx. 10 t Operating hours: approx. 19,485 h Spindle hours: approx. 9,037 h Condition: Used Available from March 2027 Technical features & accessories: - 3 cross slides - 2 turrets, 12-station (driven/live tooling) - 2 C-axes - Y-axis on slide 1 - Y-axis on slide 2 - Chip conveyor - Breuning bar loader Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1492, turning length: 620 mm, turning diameter: 240 mm, spindle speed (max.): 4,200 rpm, controller model: Okuma OSP5000L, No minimum price – guaranteed sale to the highest bidder! Gujdpfo Afxvvex Akhsi TECHNICAL DETAILS Upper turret: 10 stations Lower turret: 8 stations Chuck: 250 mm / 10" Spindle nose: A2-6 Spindle bore: 62–80 mm Max. turning diameter: 240 mm Swinging diameter over bed: 450 mm Swinging diameter over cross slide: 300 mm Max. turning length: 600–620 mm Spindle speed: up to 4200 rpm Main motor: 15–20 kW Rapid traverse X/U: approx. 12 m/min Rapid traverse Z/W: approx. 15 m/min MACHINE DETAILS Control: Okuma OSP5000L Voltage: 380 V Phases: 3 Frequency: 50 Hz Max. power consumption: 49 kVA Total current: 82 A Max. motor current: 106 A Short-circuit strength: 10 kA Weight: approx. 5,500 kg Dimensions: approx. 2940 × 1730 × 1830 mm EQUIPMENT Documentation/Manual

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, spindle motor power: 3,700 W, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, bar passage: 20 mm, bar diameter (max.): 20 mm, Equipment: rotational speed infinitely variable, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Travel Z1 [mm]: 205, long turning mode Travel Z1 [mm]: 55, short turning mode Type of collet: 145E Synchronously rotating guide bushing unit Type of guide bushing: T223 TAILSTOCK Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 Maximum turning diameter [mm]: 20 Max. part length, eject forward [mm]: 80, Option 120 C-axis with 0.001° Gsdpe Ahy Tzofx Akhsui Travel Z2 [mm]: 255 Type of collet: 145E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling unit: - Number: 4 modular, driven drilling/milling spindles (Tools 4 x ER16) - Manual B-axis 3 x ER 16 - Power: [kW]: 2.5 (S6000) - Swiveling range 90° (0° ~ 90°) Cross slide, tailstock - Number: 3 fixed drilling stations ER16 Rear-end machining with Y2 axis, travel 60 mm - Tool carrier for 8 tools - 4 modular, driven drilling/milling spindles ER11 - 4 fixed drilling stations Ø 19.05 mm AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Connected load [kVA]: 15 CONTROL Control type: Fanuc 32iB Plus Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External operating panel with handwheel 10.4" color monitor LCD/MDI Automatic shutdown function PowerOff Program check function (test run via handwheel possible) Continuous threading cycle Running time display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder Interface for JBS Weight 2.95 tons ACCESSORIES Alignment feet with leveling elements Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating instructions including parameter list and test report)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 53,000 h, functionality: unexamined, workpiece diameter (max.): 150 mm, overall weight: 8,000 kg, Equipment: cooling unit, documentation/manual, For sale is a twin-spindle vertical turning machine for workpieces with a diameter of up to 150 mm. The machine was put into production in 2025 and is currently in our warehouse. Guodo Ah T Evspfx Akhei The machine can be connected to the power supply for a demonstration. The machine features a 20-bar coolant system, chip conveyor, 8 tool positions per spindle, and an oil mist separator. It also includes an automatic part feeder with a part storage system. Further information can be found in the technical data sheet, see below.

Condition: used, Year of construction: 2013, Brand and Model: YDPM ML- 480 Type: CNC Year: 2013 Guedpfj Aivpxjx Akhji Max. Allowable diameter: 480 mm Max. Turning diameter: 210 mm Max. Turning length: 508 mm Bed angle: 45º Z-axis travel : 520 mm X – axis travel : 176 mm Quill / bar: 62 mm/51 mm Spindle nose: ASA A2-6 Spindle motor: 11/15 kw Spindle speed : 4.500 rpm Number of tools : 10/12 Turret: 5/6 Tailstock travel : 425 mm

Condition: used, Year of construction: 2013, feed rate X-axis: 20 m/min, feed rate Z-axis: 40 m/min, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 30 m/min, Crankshaft Lathe Manufacturer: NILES-SIMMONS Type: N20/2 Year of manufacture: 2013 Technical data: - Feed rate (X/Z): 20 / 40 m/min - Rapid traverse (X/Z): 18,000 / 30,000 mm/min - Number of tool stations: 12 positions - Tool holder: VDI 50 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gusdpjx Ik Tdofx Akhei There are 2 machines available. Accessories, tools shown, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2004, turning diameter 820 mm turning length 2000 mm control Siemens 840 D z-travel Z1=1980 Z2=2290 mm x-travel X1=500 X2=500 mm workpiece weight 1600 kg spindle nose A15 Gedpfxs Aaq Sfe Akhjui main spindle bore 160 mm feeds x-axis 0,1-18.000 mm/min rapid traverse X-axis 18 m/min feeds z-axis 0,1-24.000 mm/min rapid traverse Z-axis 30 m/min turret I 16 Wkzg. turret II 16 Wkzg. tool taper Capto C6 voltage 400 V main spindle speeds: 1-2.500 U/min total power requirement 180 KVA weight of the machine ca. 36 t dimensions of the machine ca. 9,7x2,5x4 m

Condition: good (used), Year of construction: 2011, workpiece weight (max.): 20 kg, chuck outer diameter: 250 mm, rapid traverse X-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, turning diameter: 250 mm, torque: 256 Nm, power: 45 kW (61.18 HP), CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Godj Agr Dyspfx Akheui Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm Gjdpfx Akozvx A Tshoui -Swinging diameter over cross slide 185mm -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: used, Year of construction: 1977, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1977, with a three-jaw chuck, Multifix system, and collet chuck attachment with a set of collets. The machine is in working condition and can be demonstrated under power upon request. Gedpfe Aih R Usx Akhjui

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, Gjdpjhutpvofx Akhoui accessories NOT UNDER POWER - BARGAIN PRICE ! *

Year of construction: 1990, condition: used, Offered is a CNC lathe with a tool turret. Control: TRAUB SYSTEM TX-8-D, collet chuck, tailstock with center. Inspection possible by arrangement. Gsdpfo Aiu Sbsx Akhjui

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm Guedpfxs Ai A H To Akhei - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Year of construction: 1991, condition: used, Offered is a CNC lathe with a chip conveyor. Control: Philips CNC 3580, chuck type KFD-HS 250/3 and clamping cylinder type VSNC 200/76. Inspection possible by arrangement. Gusdpfx Ao Akd Rqekhji