Used Debarker for sale (126)

Condition: used, Year of construction: 1999, functionality: fully functional, feed rate X-axis: 75 m/min, Min. log diameter: 11 cm Max. log diameter: 75 cm Feed speed: 75 m/min Rotor speed: 222 rpm Ledpfew Emhfex Ahzehb Rotor motor: 75 kW Feed motor: 2.2 kW Hydraulic unit: 1.5 kW Infeed (to conveyor) and outfeed (wheel set) are included. In 2021, the rotor was completely replaced with a factory-overhauled rotor (invoice available). Control cabinets are not included! Year of manufacture is estimated to be the late 1990s. Videos of the machine can be sent.

Condition: used, Bark remover Cambio 500 in good condition Lhsdpfxjwi Iz Io Ahzeb

Condition: ready for operation (used), Debarking drum in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Lsdpfew N Rxbsx Ahzjhb Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed.

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Lhjdexr Ityepfx Ahzeb Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Spare parts package Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Lsdpjpbbmljfx Ahzohb

Condition: reconditioned (used), functionality: fully functional, CAMBIO 45, very good condition, fully functional. Lhedpfov Ag Rvjx Ahzeb

Condition: used, Spepdiscs 15" Lodpfx Ajuk Sk Hehzohb

Year of construction: 1989, condition: excellent (used), the subject of the sale is a feeder and a receiver for the sagem debarker. 100% functional Lhjdpfxolx Nu Us Ahzob

Condition: excellent (used), debarker cross feeder 4 x 5 m longitudinal feeder 13 m x 90 cm chain width 50 cm Lhedpjv Ikqkefx Ahzsb

Condition: good (used), log diameter 100-660mm Ljdpfxev Ap Sis Ahzjhb transverse and longitudinal feeder included

Condition: new, Year of construction: 2025, functionality: fully functional, For sale: NEW debarker with reducer for root swellings. Year of manufacture: 2025 Technical specifications: Log diameters: 15-60 cm Log length: 100-300 cm Installed power: 60 kW Additionally: -> Log handling on the roller conveyor, -> Hydraulic ejection of debarked logs, -> Hydraulic centering pressure system. Ledpowxvv Sjfx Ahzjhb -> Horizontal bark conveyor included. -> All-season operator's cabin.

Condition: good (used), - usefull spare parts for VK 26 - feeding wheels - assembling tools Ljdpoxnn U Aofx Ahzshb - different small items and parts for different purposies - the main frame of the rotor

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. The debarking rotor bearing is new.. The machine has been overhauled. Lodpfxsxhdtze Ahzohb 6-month warranty

Condition: reconditioned (used), Debarker for logs from 130 to 700 mm in diameter. Ljdpowfz Iysfx Ahzehb

Condition: reconditioned (used), B., VK26M (1974 series) with motorized discharge table: - Main engine - Feeding table ( driven ) - Output table - Control cabinet Including infeed and outfeed table, workshop inspected * - debarking capacity: 10cm - 61cm diameter Lsdpfx Asfn Iu Ijhzohb - 4 main decision makers - 4 cutting blades - Rotor speed =235 rpm / min - Rotor öppning=65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( length of wood ) Dimension ( without infeed and outfeed table ) L= 9840mm Entry table: 3540mm x 1000mm x 1900 Main engine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Item 1 1 Content: Disassembly of machinery, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material of blade shafts on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: Piece V-belt for rotor drive Pos 4 1 Gear oil Pos 5 1 Material: Abrasive + Colours Pos 6 4 Valonkone piece peeling knife Pos 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta-start for 30 kw main motor with 3-phase delta start for 11 kW geared motor with start for 4 kw gear motor supply with start for 4 kw gear motor output Main Starter Emergency STOP

Condition: refurbished (used), Complete set of debarking knives for Valonkone VK26M Lsdpsq A Ic Aefx Ahzshb consisting of: 4 pre-cutters 4 main cutters *Incl. metal box

Condition: reconditioned (used), Year of construction: 1974, Valonkone VK26M (1974 series) with outfeed table: - Main machine - Feeding table ( driven ) - outfeed table - switch cabinet IMMEDIATELY available from stock Including infeed and outfeed table, workshop inspected * - Debarking capacity: 10cm - 61cm diameter - 4 main cutters - 4 cutting knives - Rotor speed =235 rpm / min - Rotor opening = 65cm - 30 KW motor, speed 1500/ min - Speed: 17-42m / min - 3m or longer ( wood length ) Dimension ( without infeed and outfeed table ) L= 9840mm infeed table: 3540mm x 1000mm x 1900 Main machine VK26M : 2530mm x 2200mm x 2350 Outfeed table ( motorized table ) : 3170mm x 1000mm x 1300 RENOVATION: Pos 1 1 Content: Machine disassembly, washing, sandblasting, priming and painting, repair, assembly Pos 2 1 Material blade axles on rotor new bearings and sealing (if necessary) Item 3 5 5 Other material: piece of V-belt for rotor drive Item 4 1 Gear oil Item 5 1 Material: Abrasive + paints Item 6 4 Valonkone piece peeling blade Item 7 4 Valonkone piece Pre-separator Pos 8 1 Switch cabinet : with 3-phase delta start for 30 kw main motor with 3-phase delta start for 11 kw geared motor Lhjdpfx Aotwrp Dehzeb with start for 4 kw geared motor infeed with start for 4 kw geared motor output Main starter Emergency STOP

Condition: as good as new (ex-display), functionality: fully functional, Debarking machine Valon Kone 26 MX - About 6000m3 debarked with the machine - Built as a prototype - Frame extended and additional support rollers added for debarking longer material - Debarking input automatic - Equipped with two frequency converters to adjust the speed - Ready for OmronSysac or other measuring device - Platform/undercarriage built in 1991 - Crane Epsilon 21TM/year -91 - Renovated in summer -23 - Machine/plant weight: 27 tons Lodsuhcf Ispfx Ahzjhb - Length: 15 m - Combination length 22m when transported. Also included: Scania 143 - Year 1991 - Air suspension on rear axles - Robson - Registered as a work machine Aggregate: Stamford 250 kw/Perkins 2000 series 340 hp - Hours of use, about 4000h - Perfect condition

Condition: like new (used), Debarker with hydraulic infeed Lodpfsrwwxaex Ahzjhb

Condition: used, Debarker bezner 40-140. Working. Video by request. Lhedpfxewkkbtj Ahzeb

Condition: used, Valon Kone VK450 with infeed conveyor. Lhodpfx Ahovt S R Ajzob

Condition: used, Valon Kone VK26M With infeed and outfeed conveyors. Lsdpfevgtz Nox Ahzjhb

Condition: excellent (used), functionality: fully functional, I will sell a HAWA debarker Very good condition Lsdpfswnzq Tjx Ahzohb

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Ledpetk N Dkofx Ahzshb

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, round log debarker Valon Kone VK-820-C-3R, Type 820-RE/480/480-12/9-79-RHP-RS/3 Complete with a feed conveyor, feed speed up to 110 m/min Manufactured in 2005 Lhodpoxg Tthjfx Ahzeb Serviced in 2023, not in use since