Debarking machine

Cambio Air-Ten 90-75 A

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: EWD DWK T-4, EWD edger circular saw line EWD ZE Dcjdpfx Aox Rn Udea Ned Microtec 3D measurement EWD edger unit FZ5 Roller unit EWD EVW Flexible twin-shaft circular saw EWD DWK 700 T-4 4 flexible saw axes Cutting height 60–340 mm 2x200 kW Complete control system Complete hydraulics/control cabinets

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood Dcsdpfoq Iivasx Aa Njd - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, For sale on behalf of a customer is a Segem ERT 100. The machine was operational until removal. The rotor bearing was replaced in September 2023 (approx. 2000 hours). Dsdpfxexhf N Ds Aa Nocd

Condition: new, table length 2200 mm table width 1500 mm Dcodpfx Aaeupxwkj Njd stroke height 1850 mm weight max. in kg 2000 kg 260 mm total power requirement 1,5 kW stroke speed - idle stroke upwards 40 sek. stroke speed - idle stroke downwards 30 sek. connected load frequency 400 V weight of the machine ca. 0,45 t dimensions of the machine ca. 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min Dcsdoh E Sghepfx Aa Ned speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18.000 rpm Disassembled - directly available

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor 11 KW feed unit non-driven extraction table Dcodpfx Aju Hmacja Nsd Machine workshop checked Machine cleaned and repainted

Condition: excellent (used), Year of construction: 2007, operating hours: 239 h, functionality: fully functional, The machine originates from our own sawmill, which is now being gradually decommissioned. With only 238 operating hours, the root reducer is in exceptionally good technical and visual condition. Technical Data Machine type: Root Reducer Manufacturer: Baljer & Zembrod Model: WRP / SEB Year of manufacture: 2007 Operating hours: approx. 238 Condition: used, fully functional Visual condition: very good (approx. 8/10) Description As the sawmill has not been operating full-time in recent years and the focus has shifted to other business areas, the root reducer has only been used occasionally and therefore exhibits minimal wear. The hydraulics, electrics, and mechanics are all fully functional. The machine operated reliably until decommissioning and was regularly inspected and professionally lubricated. Dcsdpfx Aasx N Sfko Nod Due to the planned closure of the sawmill and structural changes at the site, the machine is now being offered for sale.

Condition: new, Year of construction: 2026, functionality: fully functional, BAS 100 (STA) – Upsetting machine for band and gang saws, automatically hydraulically controlled Dodjv Tqzyepfx Aa Necd Upsetting the saw teeth, in addition to setting, is another method to ensure free cutting of the saw during machining. During the upsetting process, an upsetting pin is positioned in front of the saw tooth, while the tooth is held against an anvil. By rotating the eccentric upsetting pin, the saw blade material is displaced toward the tip of the tooth. Once the upsetting process is completed, the upsetting pin automatically returns to its original position.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Dcjdpod H Hmhsfx Aa Ned Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, For sale is a high-precision laser cutting machine with 3,000-watt laser power: Type: LG-1313/3kW HaiCut Premium Line - Fully equipped - Innovative 3-gas switching (pressure and gas type can be controlled via software) Cut with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with fireclay - Machine bed and axes measured and calibrated using Renishaw interferometer Our goal is to offer the best, most reliable, and competitively priced laser machines currently available on the market. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameter library is included as well as top-tier on-site service. Please also note our attractive leasing/financing options. Brand new machine, delivery time approx. 6-8 weeks We would be happy to demonstrate the machine to you at our facility. Travel range: approx. 1300 x 1300 mm Table area: approx. 2500 x 1300 mm (plenty of space for medium-format sheets) Pull-out cutting table For high-precision metal cutting Fully installed and calibrated Cutting software in German Dedpei Igausfx Aa Njcd Incl. nesting module Very easy to operate Just switch on and start cutting Laser source by Max Photonics (G5/German version) with 3,000 watts power Comprehensive electronic and mechanical collision protection measures for the cutting head Large laser safety window in the front door Automatic front door Safety light curtain for maximum operator protection Cutting capacity: - Stainless steel up to 12 mm - Mild steel up to 22 mm - Aluminum up to 12 mm - Brass up to 5 mm Heavy-duty industrial quality Complete system / ready for immediate use LED work area lighting 200 mm duct connection for fume extraction Incl. exhaust fan Leasing or hire purchase available via our financing partner. Need different power or table size? No problem, we have multiple machines in stock or available at short notice. Sale to commercial customers only. Delivery/advice/sales exclusively in Germany, Austria, or Switzerland. Machine dimensions approx.: Width: 3.5 m, Height: 2.1 m, Depth: 3.5 m Weight: approx. 2.5 tons