Used Debarking for sale (95)

Condition: used, functionality: fully functional, Machine in working order. Cedpfx Aezq T Iaekqerf Engine: 18 kW. Immediately available.

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Credpfx Asruq Dfokqsf

Condition: reconditioned (used), functionality: fully functional, • Infeed and centering table in front of the machine Crjdpfxozn Ulze Akqjf • 6-36 cm diameter of the roundwood • 1.5 m minimum length of the logs • 1 set of new debarking knives • 1 set of debarking knives as a spare part • 30 kW main motor • 7.5 kW feed gear • Complete electrical system • Machine workshop-tested and newly painted •

Condition: excellent (used), Catalog number: 8058 TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES – German-made – for debarking logs – used debarker, very good condition Crjdpfx Akezpwryeqof – machine equipped with a feeder and an outfeed – video showing the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company's headquarters. Net price: 105,000 PLN Net price: 25,000 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: used, Bark remover Cambio 500 in good condition Crjdpswi Iz Iofx Akqjf

Condition: like new (used), functionality: fully functional, Completely restored guidework for debarker, as good as new Cjdpfx Asq Dp Erjkqsrf

Condition: ready for operation (used), Log intake with debarker. Below parts included: Credpfx Akszrdn Hsqof - Log deck with steep-feeder - In-feed conveyor - Debarker type cambio 73-650 - Out-feed log conveyor with logkicker - Conveyor for bark

Condition: not inspected (used), Used Segem debarking machine for sale. Information available upon request. Crodpszr Ev Ssfx Akqef

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Cedpfx Akozfwlleqjrf

Condition: used, Cambio Debarker 54. If you are interested in purchasing, we are open to discussing the price. Crsdpfx Akeww A E Rjqef

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately Crsdpfjwt Ry Ujx Akqef

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, The CAMBIO 66 log debarker is equipped with the latest generation AIR TEN rotor.Knife sytem CAMPRO TRIMAX. The debarker is sold after major repairs. The sales package includes the centering conveyor SODERHAMN. Cedpfehkh Hxsx Akqerf

Condition: used, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 700 m/min, CAMBIO 66 roundwood debarker with CAM TOOL knife system. Equipped with mechanical rotor. Comes with centering conveyor and additional rollers after the debarker. In full working order after major overhaul. Codpfstcu Uaox Akqjrf

Condition: used, Year of construction: 2012, functionality: fully functional, Milling head debarking, max. 6000 mm length, 35 kW, with mechanization. Codjxpuzrepfx Akqerf

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Codpfx Aeycutcekqorf Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor 4. Main Function Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2000, condition: used, Well-maintained VK 26 MX for sale. The machine will be available from May 2027 and can also be inspected while in operation. Crjdpfxszkt Dbs Akqof

Condition: new, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 45 m/min, working width: 1,100 mm, number of blades: 5, power of feed motor: 22 W, Debarker ZE 1105 Vario Crsdpjyyv Dfefx Akqef For round timber up to 110 cm! In the short wood variant from 1.80 meters log length! Perfect debarking result thanks to pressure adjustment of the knives during operation. All functions are performed hydraulically. Many adjustment options during operation, e.g. via radio remote control. Opening of knives in case of malfunctions at the push of a button. As a full-service supplier for log yards, we can offer you an individual and non-binding quotation for complete log yard solutions.

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Crodpfx Ajy R Avvekqof

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker Crodpfstrd Hfox Akqsf

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor. Csdpfx Asvu D Dwekqjrf

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Balz BG 90 with feed block conveyor Still in use today Min. log diameter: 140 mm Max. log diameter: 900 mm Shortest wood length: 2000 mm Csdpfjygli Nex Akqsrf Feed speed: 10 or 16 m/min Rotor with 5 knives

Condition: reconditioned (used), Totally renovated Cambio 75 debarker with 5 knives airten rotor and brand new hydraulic dampers Crodencfrzepfx Akqof

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm Codjw D Hy Sspfx Akqorf - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor - Feed speed up to 114 m/min (currently set to 95 m/min)

Condition: good (used), The debarker is ideally suited for debarking both hardwood and softwood. The carriage is made of heavy-duty steel construction. 4 pairs of drive wheels. Crjdpfx Aotuyr Ijkqef The milling frame is made of heavy-duty steel construction. Hydraulic milling head. 22 kW engine.

Year of construction: 2007, condition: good (used), A well-maintained Nicholson A6/35” is being offered. Cedpfx Aey Rhymskqerf