Used Deburr for sale (44)

Condition: used, Flackler Aut 1000 VAC Rotary Deburrer/Polisher, 1000mm Feed Belt. S/No. 1705 (2013). Country of Origin: Denmark Bljdpfx Asyid R Ioanod Location: These lots are located in Hull, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Blsdpfx Aepu R Ngjansd Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Blodpfxohrkrwj Aaned Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Weight 65 kg good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Bodpfx Aashrkrpsnold Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Weight 45 kg good condition

Condition: used, Brush deburring machine, presumably BAUER Year of manufacture: approx. 1985 Brush diameter: 250 / 300 mm Brush width: 20–60 mm Speed: 1500 / 3000 rpm Power: approx. 2 / 3 kW Mains connection: 380 Volt, 50 Hz - with table base Required space (L x W x H): 700 x 600 x 1250 mm Blsdpfx Asxrgupsanjd Weight: 120 kg In good condition

Condition: good (used), Thread cutting machine, pipe thread cutter Blsdpfjwyu Hfsx Aanod -Pipe deburrer: for thread cutting machine -Pipe size: up to inner Ø 58 mm -Dimensions: see photos -Dimensions: 270/250/H75 mm -Weight: 2.7 kg

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Blsdpfoxpqy Rsx Aansd Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Year of construction: 2023, condition: as good as new (ex-display), - Demonstration machine in mint condition- - 180° swivel head for rounding and deburring - Ergonomic working Bsdpfx Asflvc Hjansld - Uniform rounding - Processing of small parts possible - anti-slip mat

Condition: like new (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RBB Surplus to requirements with only 58 hours working time This machine has been re-configured to have one abrasive belt and two subsequent ScotchBrite barrel brushes ideal for processing smaller sheet metal profiles. 650mm processing width Tampico cleaning brushes on the back end of the conveyor also included. Wet Dust Extractor with ducting and installation / servicing available in the UK Machine widely used in the automotive sector at manufacturing sites supplying BMW etc 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) For a full quotation, technical information or any questions you might have about this machine please contact us Bsdjwnukmjpfx Aanold

Condition: refurbished (used), 100% REVISED IN 2025 PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Bedoymarfepfx Aaneld Scope of supply: 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Pieces length / fixed lengths: 40 – 120 mm Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Condition: used, Complete LOADING, CUTTING & DEBURRING LINE & UNLOADING, manufactured by RALC CTS CONNI OPTIONAL : AUTOMATIC ROBOTIC BUNDLING SYSTEM in squares/hexagonal bundles, with exit carriage and safety areas Model RALC LYBRA 450 + RALC SDB 100 – 5000 - Cutting range: 40-140mm - Bundle loader: 6,000mm - 12,300mm x 5Tn - Unloading: Up to 5,000mm - Optional: Automatic robotic packing system BUNDLE SPECIFICATIONS: Weight at loader: 5000 Kg Diameter max.: 600 mm Min. – max. tube length at entry: 6000 – 12300 mm Max. bending of the tubes at entry: 1.5 mm/m CUTTING Possible diameters with loader: - Rounds : 40 – 140 mm - Squares : 40x40 – 135x135 mm - Rectangles : 50x25 – 200x80 mm Max. tube weight: 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350-400-450 mm Disc holding acc. to DIN 8576: 50/4/14/80 mm, 40/4/12/64 mm Max. tube length at exit: 5000 mm DEBURRING Deburring unit Dimensions: - Rounds diameter: 20 – 102 mm - Squares: 30x30 – 70x70 mm - Rectangles: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz MITRE CUTTING With manual loading, it is also possible to make MITRE CUTTING Cutting Capacity (without loader) Round tube: - At 90º: 100 – 125 – 145 mm - At 45º: 90 – 115 – 135 mm - At 30º: 80 – 95 – 110 mm Squares: - At 90º: 90 – 110 – 130 mm - At 45º: 80 – 100 – 110 mm - At 30º: 70 – 80 – 90 mm Rectangles: - At 90º: 140x70 – 160x90 – 180x110 mm - At 45º: 110x60 – 130x70 – 150x70 mm - At 30º: 80x40 – 100x50 – 110x60 mm SCOPE OF SUPPLY 1. Loader Mod. CM5FT12 for 5000 kg bundle from 5000 to 12300 mm length 2. Cutting unit Mod. LYBRA C450 with: - Micro-lubrication - Air blowing - Chips conveyor - Tilting carriage - Unloading clamp 3. Deburring unit Mod. SDB100 5000 4. Exit collecting cradle with endless slings 5. Complete electrics & hydraulics 6. Existing documentation * 7. Existing spares * Bedpfx Aaovt Tzcjnsld *To be checked before order OPTION : Front collecting automatic portal with robot, capable of packing round, square, or rectangular tubes in hexagonal or square bundles Cutting range: 40 - 140 mm Bundle loader: 6.000 mm - 12.300 mm x 5 Tn Unloading: Up to 5.000 mm Optional: Automatic robotic packing system Bundle weight at loader: 5000 Kg Bundle diameter max.: 600 mm Tube length at entry: 6.000 – 12.300 mm Bending of the tubes at entry: Max. 1.5 mm/m CUTTING Possible diameters with loader, rounds: 40 – 140 mm CUTTING Possible dimensions with loader, squares: 40x40 – 135x135 mm CUTTING Possible dimensions with loader, rectangles: 50x25 – 200x80 mm Tube weight: Max. 200 kg Feeding speed: 10 - 60 m/min Cutting disc diameter: 350 - 400 - 450 mm Tube length at exit: Max. 5.000 mm DEBURRING Rounds diameter: 20 – 102 mm DEBURRING Squares dimensions: 30x30 – 70x70 mm DEBURRING Rectangles dimensions: 40x20 – 80x50 mm Length: 500 – 5000 mm Material: St 37 acc, DIN17100 Max. bending of tubes at deburring: 2 mm/m Brush diameter: 300 mm Brush width: 600 mm Steel wire diameter: 0.35 mm Power: 3x400/50 V/Hz

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,700 mm, workpiece weight (max.): 500 kg, overall weight: 680 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 600 mm, table length: 1,300 mm, table width: 600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 600 mm, height adjustment type: mechanical, input current: 20 A, Equipment: CE marking, documentation/manual, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a trusted and experienced company specializing in metal and woodworking machinery. With decades of expertise and innovation, Madora is known for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial clients across Europe. Our machines are designed for precision, performance, and long-term reliability—all at competitive prices. Bodpfx Aowzu A Njaneld The smallest model in the MADORA range, the GP 600 2Z, is a versatile deburring machine for cleaning sheet metal after various cutting processes. Equipped with two "Z"-type machining units, it offers outstanding flexibility and high machining capacity. The machine can perform two operations simultaneously: not only can it remove scale after plasma cutting, but it is also able to deburr or round the edges of workpieces after laser cutting—all in a single pass. Its machining width of up to 600 mm allows for the efficient processing of small and medium-sized components. With suitable tooling, the GP 600 2Z handles heavy edge rounding and oxide removal as well. The GP 600 2Z deburring machine features an electronic numeric control panel, which allows the operator precise and continuous adjustment of machining parameters such as workpiece height, feed rate, and tool rotation speed. Each machining unit can be controlled independently, giving the operator full flexibility to select the required process steps within a single pass.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,500 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,830 mm, total width: 2,100 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,700 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,500 mm, table length: 2,000 mm, table width: 1,500 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,500 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,500 mm, height adjustment type: mechanical, input current: 61 A, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to offer our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and wood processing machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and user-friendly solutions tailored to meet the demands of industrial customers across Europe. Our machines are engineered for precision, performance, and long-term reliability—always at competitive prices. Bjdpjwzvkhefx Aanold The GP 1500 3Z is a versatile, high-capacity deburring machine designed for cleaning sheet metal following various cutting processes. Equipped with three independent "Z"-type machining units, this model features outstanding flexibility and throughput. In practical terms, the machine can perform up to three operations simultaneously: not only does it efficiently remove scale and slag after plasma cutting, but it can also deburr and round the edges of laser-cut parts—all in a single pass. The GP 1500 3Z accommodates a wide range of material thicknesses and workpiece widths up to 1,500 mm, making it ideal for both small and large components. With the appropriate tooling, the machine is also well-suited for intensive edge rounding and oxide layer removal. Operator convenience is ensured by a TFT touchscreen control panel, which provides continuous, comprehensive management of all machining parameters, including workpiece height, feed speed, and tool rotation. Each unit is independently controllable, allowing the operator to select the required processing stages for every pass.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 2,200 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,000 mm, table length: 2,000 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 39 A, number of spindles: 9, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer Bljdpfowztn Dex Aanjd We are pleased to offer our premium deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable company with extensive experience in the production of metalworking and woodworking machinery. With decades of expertise and innovation, Madora is recognized for delivering robust, efficient, and operator-friendly solutions tailored to the needs of industrial clients throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. The GP 1000 2Z is an outstanding, versatile deburring machine designed for cleaning sheet metal after various cutting processes. This model is fitted with two ‘Z’-type oscillating and rotating heads. What does this mean in practice? It allows for two operations to be performed simultaneously: not only does it efficiently remove scale after plasma cutting, but it also deburrs and rounds off the edges of workpieces following laser cutting. The broad range of working thicknesses and widths of up to 1,000 mm make it possible to process both small and large components. With suitable tooling, the machine is also capable of heavy edge rounding and oxide removal. The GP 1000 2Z deburring machine features a TFT touch-screen control panel, enabling the operator to continuously and precisely manage machining parameters such as workpiece height, feed rate, and tool rotation speed.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 2,230 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 500 kg, overall weight: 3,580 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,000 mm, table length: 3,470 mm, table width: 1,000 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 71 A, number of spindles: 9, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer Bsdpfxowzttgo Aanold We are pleased to present our high-quality deburring machines, produced in Poland by Madora Sp. z o.o., a reputable and experienced manufacturer specializing in metalworking and woodworking machinery. With decades of expertise and innovation, Madora is renowned for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial customers throughout Europe. Our machines are engineered for precision, performance, and long-term reliability – all at competitive prices. The GP1000-4Z is a versatile deburring machine designed for post-cutting cleaning of sheet metal. Equipped with four "Z" type processing units, it offers outstanding versatility and processing capacity. What does this mean in practice? It allows for up to four operations simultaneously: not only does it remove scale following plasma cutting, but it also deburrs and rounds off workpiece edges after laser cutting – all in a single pass. The extensive processing range, including sheet thicknesses and widths up to 1,000 mm, makes it suitable for both small and large workpieces. With the appropriate tooling, the machine is also ideal for heavy edge rounding and oxide removal. The GP1000-4Z deburring machine features a TFT touch-screen panel, providing the operator with complete and continuous control over parameters such as workpiece thickness, feed speed, and tool rotation speed. Each unit can be operated independently, enabling the operator to select which processing steps to perform in a single pass.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,000 mm, type of input current: three-phase, sheet thickness (max.): 70 mm, sheet thickness steel (max.): 70 mm, sheet thickness aluminum (max.): 70 mm, sheet thickness copper (max.): 70 mm, sheet thickness brass (max.): 70 mm, total length: 3,800 mm, total width: 1,600 mm, total height: 2,250 mm, workpiece weight (max.): 500 kg, overall weight: 3,200 kg, working height: 70 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 1,000 mm, table length: 3,560 mm, table width: 1,000 mm, workpiece height (max.): 70 mm, input frequency: 50 Hz, workpiece width (max.): 1,000 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 1,000 mm, height adjustment type: mechanical, input current: 75 A, Equipment: CE marking, type plate available, Polish Deburring Machine – Direct from Manufacturer We are pleased to introduce our premium-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a reputable and experienced company specializing in metal and woodworking machinery. With decades of know-how and innovation, Madora is recognized for providing robust, efficient, and user-friendly solutions tailored to the requirements of industrial clients throughout Europe. Our machines deliver precision, high performance, and long-term dependability—all at competitive prices. The GL 1000 PZZR is a versatile deburring machine featuring four machining stations to guarantee top-quality finishing of your workpieces. The initial abrasive belt unit, together with two oscillating and rotating "Z" type units, enables comprehensive surface grinding as well as both standard and heavy-duty deburring in the preliminary stages. The final rotating station is dedicated to intensive edge rounding, ensuring perfectly finished edges on your parts. The configuration of the processing units allows for highly flexible operation after processes such as plasma or laser cutting. The abrasive belt efficiently removes excess material during deburring and grinding, making it ideal for eliminating burrs and heat-affected zones from laser-cut components. Multiple sandpaper types can be used with the abrasive belt unit to achieve specific finish requirements. The rotating unit employed in the GL 1000 PZZR is designed for heavy edge rounding and can produce an R2 profile on thicker workpieces, making it an optimal solution for demanding industrial applications. Bodpjwzv U Hjfx Aanjld

Year of construction: 2025, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) Blsdjuia Dqopfx Aansd - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Bsdpfsl Dw D Ejx Aanold Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Bljdpeuxc Rhofx Aansd

Condition: new, Metal Deburring and Edge Rounding Machine (Double Side). DM1100 2C, edge rounds top and bottom sides of metal parts in one single pass. This double sided operation machine deburrs metal sheets rounding its internal and external contours. Featuring 2 sets of double cross belts this machine removes sharp edges on stainless steel, steel and aluminum parts cut by laser, punching or shearing. This metal deburring machine can easily edge round parts with small dimensions, being capable of deburring different shapes and parts sizes from 50mm up to 1100mm. Processes simultaneously both sides of metal sheet parts cut by laser or punching machine, saving time and reducing operation costs. Additional conveyor belt and support table enables single side edge rounding of metal parts down to 50x50mm. DM1100 2C can edge round metal parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Easy and tool free cross belt replacement. Program for automatic positioning of upper and lower cross belts in order to improve the access, reducing replacement procedure time. High performance on all edges and also on internal holes. Easy to use with an integrated touch screen for monitoring the working settings and the machine alarms. Technical Details: Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 2-8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) (4x) 3 Feeding motor (kW) (3x) 0.18 Blsdsd Ev Upopfx Aanjd Total power (kw) 13.1 Consumption (A) 30 Dust extraction connection (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Bedpjd Ixbzofx Aaneld OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slotting Centre Machine No. M64127 Year of manufacture: 09/2019 The commutator slotting centre has four machining steps. The following components are approached in the steps: Contact slitting saw Insulating grooving saw Deburrer Brush The Stäubli TS 80 robot with SP1 control has two grippers that pass the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer  Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC  More pictures via this link. Further technical data will follow shortly.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Bjdeg H Inzspfx Aansld Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Blodpfxsp Atgbs Aanjd

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts Bodpfxox I Agpe Aansld -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size Bedpfx Ajv T Trujansld - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters