Used Debarker for sale (103)

Condition: used, functionality: fully functional, Machine in working order. Ljdpfxjzq T Iaj Afweaf Engine: 18 kW. Immediately available.

Condition: excellent (used), Catalog number: 8080 TECHNICAL DATA - log diameter: 60-360mm - min. log length: 1500mm Ledpfx Afezu Sypowjaf - rotor diameter: 385mm - number of knives: 4 - drive system: PTO shaft - dimensions (L/W/H): 2200x2900x1700mm - weight: approximately 3000kg ADVANTAGES - PTO shaft driven - for debarking logs - country of origin: Finland - used debarker, very good condition Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalog number: 8079 Lasdpfx Aezu Svwofwef TECHNICAL DATA - log diameter 60-360mm - min. log length 1500mm - rotor diameter 385mm - number of blades 4 - drive system: PTO shaft - dimensions (length/width/height) 2200x2900x1700mm - weight approx. 3000kg ADVANTAGES – PTO shaft driven – for debarking logs – country of origin: Finland – used debarker, very good condition Net price: 38900 PLN Net price: 9262 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Year of construction: 2018, functionality: fully functional, number of blades: 6, Cambio debarking machine up to Ø 75 cm with infeed and outfeed – 100 m/min, completely overhauled in 2018, new 6-knife rotor, including electrical system. Lasdpszuftiefx Afwef I am offering a high-performance, extremely fast, and complete Cambio debarking system. The package includes not only the debarking machine but also the complete infeed and outfeed, so that the system can be directly integrated into your existing machinery. In 2018, the machine was completely overhauled and has been professionally maintained since then. A special highlight: During the 2018 overhaul, a completely new knife ring with 6 cutting knives was installed. The machine was operated in a single-shift operation. Price upon request.

Condition: reconditioned (used), functionality: fully functional, • Infeed and centering table in front of the machine • 6-36 cm diameter of the roundwood • 1.5 m minimum length of the logs Ljdpfxszn Ulzo Afwoaf • 1 set of new debarking knives • 1 set of debarking knives as a spare part • 30 kW main motor • 7.5 kW feed gear • Complete electrical system • Machine workshop-tested and newly painted •

Condition: used, Debarking plant with drum debarker and disc chipper. Ledsw N Rxbepfx Afwoaf Debarking drum type KMW Waplan in 3 sections with electrical motors for operate the debarker. Total length 45 meter Drum diameter 3.8 meter Each drum section 15 meter in length Water bearing system with pump system. Possibility to offer extra debarking sections if more are needed. Disc chipper for production of cellulose chips type KMW HH901-T12 Iggesunds "turnable chipping knife system" Capacity up to 1200 m3 of ready made chips per hour In-feed opening 760 mm Diameter chipping disc: 3400 mm Net weight: 27000 kg

Condition: ready for operation (used), Year of construction: 1999, A Söderhamn Eriksson log debarking machine with infeed and outfeed units, but without electrical equipment (control cabinets), is available. Feed speed: 75m/min, Log diameter range: 110mm-750mm, Rotor speed: 222rpm, Rotor motor power: 75kW, Feed motor power: 2.2kW, Hydraulic power unit: 1.5kW. The rotor of this machine was replaced with a factory-overhauled rotor in 2021. Documentation available. An on-site inspection is possible. Lsdpfx Afsruq Dfewsaf

Condition: used, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 700 m/min, CAMBIO 66 roundwood debarker with CAM TOOL knife system. Equipped with mechanical rotor. Comes with centering conveyor and additional rollers after the debarker. In full working order after major overhaul. Ljdpfx Aetcu Uasfwsaf

Condition: excellent (used), Catalog number: 8058 Lajdpfxozpwryo Afwjf TECHNICAL DATA - max. log diameter approx. 750mm - main engine 55kW ADVANTAGES – German-made – for debarking logs – used debarker, very good condition – machine equipped with a feeder and an outfeed – video showing the machine in operation *This is a courtesy listing – the machine is located at a sawmill 15 km from the company's headquarters. Net price: 105,000 PLN Net price: 25,000 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to fluctuations in the exchange rate)

Condition: refurbished (used), Debarking machine Valon Kone VK - 450 2RE Debarker with infeed conveyor, for log size either up to 450 mm, reducer rotor and debarking rotor. Ljdpfx Ajxhdtzofweaf The debarking rotor bearing is new.. The machine has been overhauled. 6-month warranty

Condition: used, Debarker bezner 40-140. Working. Video by request. Lodewkkbtjpfx Afwsaf

Condition: used, Bark remover Cambio 500 in good condition Lajdpfxewi Iz Ij Afwef

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 3000 – Our high-performance cutter head debarker for flexible log processing. Our StoMill 3000 is a versatile cutter head debarking machine for the efficient processing of logs with diameters up to 1,200 mm. Log lengths up to 18 m can be processed by manually feeding them in; an automatic infeed system can be integrated on request. The machine can optionally be equipped with a root reducer, thus enabling debarking and root reduction in a single process. Feeding is carried out using a forklift or crane. A touch display and a 16-channel wireless remote control ensure comfortable operation. The StoMill 3000 is therefore ideally suited for operations with varying requirements for wood preparation. Description: For fully automatic debarking and root reduction of hardwood and softwood. Advantages of the system: • Cutter head debarker and root reducer in one machine Laodpfxork Nk Ee Afwjf • Patented safety cutter blade shaft • Fully automatic process • Operation via wireless remote control • Low energy consumption Technical data: • Debarking shaft with 22 kW or 30 kW drive power • Reducer shaft with 15 kW - 45 kW drive power • For all logs with a length of 2 meters or more • Log diameter: 20 – 120 cm Options: • Chip box • Scraper conveyor for chip discharge • Log ejector / log collection tray

Condition: new, Year of construction: 2026, functionality: fully functional, StoMill 1000 – Our cost-effective root reducer for automated processing. Laedpfxeztapvo Afwef Our StoMill 1000 is a compact root reducer for the reliable processing of roundwood with diameters up to 1,200 mm and log lengths up to 20 m. In addition to the reducing operation, logs can also be debarked through manual repositioning; an optional automatic repositioning device is also available. The logs are fed using a forklift or crane. An 8-channel radio remote control is available for operation, enabling simple, automated control. This makes the StoMill 1000 particularly suitable for smaller to medium-sized woodworking operations. The advantages of the system at a glance: Low operating costs with the same reducing result due to extremely low drive power of 15 kW Option: Reducing shaft with 22 kW drive power Low power consumption and, above all, hardly any expensive peak power All systems with patented safety blade shaft Fully automatic sequence of the reducing process Radio remote control with 2 programs and control of the clamping device and ejector The log can be repositioned several times and thus, if required, also completely debarked Optional with automatic repositioning device Carrier discs for log rotation with a wide, grippy support surface including lateral protective cover Wear-resistant carrier disc drive Practical chip box Since the chips are very short, they can be burned immediately in the wood chip system All systems with control cabinet and oil tank heating, therefore unrestricted operation even at sub-zero temperatures. Safety device, CE approval including declaration of conformity The following questions are important to us: What log lengths do you process? Do you want to reposition the logs or perhaps also debark them with the reducer? With what device (gripper, forklift, etc.) are the logs placed on the reducer? Should the logs be automatically ejected after the reducing process? How should the system be set up to achieve an optimal workflow? How high should the system be? Is a conveyor system for the removal of the bark advantageous? Is an automatic log feed required for repositioning? Should an automatic transfer of the log to another machine take place? Based on these questions, we determine the optimal position of the reducing shaft, the length of the machine, and the necessary technical equipment. Our modular system allows for a precise adaptation of the root reducer to your specific application.

Condition: like new (used), functionality: fully functional, Completely restored guidework for debarker, as good as new Lsdpfx Afeq Dp Erswsaf

Condition: ready for operation (used), Log intake with debarker. Below parts included: - Log deck with steep-feeder Lasdpszrdn Hjfx Afwjf - In-feed conveyor - Debarker type cambio 73-650 - Out-feed log conveyor with logkicker - Conveyor for bark

Condition: not inspected (used), Used Segem debarking machine for sale. Information available upon request. Laodpfozr Ev Sjx Afwef

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Laodpfx Ajzfwllofwsf

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 (Söderhamn Eriksson) is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. The machine was not in operation and was in storage. Lsdpfx Afeyl Aqhewoaf

Condition: ready for operation (used), functionality: fully functional, High-performance rotor debarker designed for efficient and continuous bark removal in sawmill lines. The machine is built for heavy-duty industrial use, ensuring excellent log cleanliness and extended saw blade lifespan. Log Diameter Capacity: 10 - 45 cm The debarker is sold as a complete operational line setup, including the following auxiliary equipment: Laedpeztqdqofx Afwof Log Infeed Ramp (Log Deck) Log Singulator & Step Feeder System Additional Outfeed Head Additional roller conveyor It's still conected and working

Condition: used, Cambio Debarker 54. If you are interested in purchasing, we are open to discussing the price. Ljdpjww A E Refx Afwjaf

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm Lasdpfxjwt Ry Uo Afwof - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, The CAMBIO 66 log debarker is equipped with the latest generation AIR TEN rotor.Knife sytem CAMPRO TRIMAX. Laodpfx Afjhkh Hxjwsf The debarker is sold after major repairs. The sales package includes the centering conveyor SODERHAMN.

Condition: used, Year of construction: 2012, functionality: fully functional, Milling head debarking, max. 6000 mm length, 35 kW, with mechanization. Lsdpfxjxpuzre Afwjaf

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11598-A, overall weight: 3,900 kg, input frequency: 50 Hz, input voltage: 380 V, We are offering this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Machine type: Log debarker / Peeling machine Year of manufacture: 2011 Serial number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with toothed knives Maximum pressure – 400 bar 2. Electrical Specifications Lodjycutcspfx Afwjaf Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Stand-alone hydraulic unit with tank and three-phase motor 4. Main Function Industrial machine designed for: - Debarking logs of various diameters - Preparing wood for pallets, packaging, chipping, or primary processing - Peeling through toothed heads and hydraulic pressure The machine is located in Valencia, Spain, and is ready for loading and shipping worldwide. If you have any questions or require further information, please feel free to send us a message or call us.