Used Debut Press for sale (12,399)

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Nwjdpfx Aozbxwiog Tjh Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Nwsdezbxvlopfx Ag Tjh Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Used Durma press brake Type AD S 30135 Capacity: 3050 x 135 tons Nwjdpfx Aoza U Twsg Tsh Cybelec ModEva 15T CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled CNC crowning Amada / Euro clamping Includes a set of tooling

Condition: good (used), Year of construction: 2006, Used 4-meter CNC press brake by Bystronic Type PR 200 4100 Njdpfx Asza U Nrog Tswh Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1 and Z2 axes Hydraulic upper and lower clamping Hydraulic CNC crowning Includes a set of tools

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW Nwjdpfxszdvcao Ag Tsh tracking travel 48 mm Overrun time 110 ms safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 1991, Used press brake from Safan Type CNCS 110 4300 Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Includes a set of tools Nsdpfxsza T Dbe Ag Tjwh

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), stroke length: 200 mm, Hydraulic press brake Manufacturer: AMADA, Type: HFP 50-20 Year of manufacture: 2006 Technical data Manufacturer: AMADA Type: HFP 50-20 Year of manufacture: 2006 Usable length: 2090 mm Capacity: 50 t Distance between uprights: 1,665 mm Stroke: 200 mm Overhang: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: 4.7 t Equipment • Controlled axes: X, R, Z1, Z2 • FIESSLER light curtain at the front • Amada upper tool clamping system • CNC control 3D AMNC graphic • Rear protective device (swiveling grating doors) • Swiveling control panel – front left • Technical documentation • Tools: o Upper tool, straight, 28°, length 2,050 mm, sectional o Upper tool, slightly bent, R1, H 100 mm, L = 2,100 mm, sectional o Lower tool V25/30°, length 2,050 mm o Lower tool, pressure pad, length 2,050 mm o Lower tool, 4-way block die, L = 1,800 mm, sectional All information is subject to change without notice. Nsdpfxozdtrxj Ag Tewh A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Bale press Presto CC 50 M, year of manufacture 2015, with lifting and tilting device. Technical data: Manufacturer: Presto Type: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Feed opening: 1030 x 1100 mm Feed volume: 0.85 m³ Tying: 3-wire, manually Throughput at a bulk density of: 35 kg/m³ - 1.3 t 60 kg/m³ - 1.7 t 100 kg/m³ - 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (L x W x H) Nwsdpfjzc Hz Eex Ag Tsh Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or our YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Presto CC 40 M, Year of manufacture: 2017 Technical Specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Binding: 4-fold, polyester strapping, manual Throughput rate at bulk density of: 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale size: 750 x 1100 mm Nwodpfezc Hy Uox Ag Tjh Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3,800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Operating instructions and CE declaration are available. Note: Channel discharge is fully automatic and regulated. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 10.8 kW (14.68 HP), pressing force: 130 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 160 mm/s, table length: 3,200 mm, throat depth: 400 mm, distance table to ram: 480 mm, clearance between the columns: 2,600 mm, total length: 3,700 mm, total width: 1,515 mm, total height: 2,630 mm, overall weight: 8,120 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, documentation/manual, safety light barrier, SENFENG BDE13032 CNC Press Brake – 3200 mm × 130 Tons The SENFENG BDE13032 is a CNC press brake designed for precise, stable, and efficient sheet metal bending. With a working length of 3200 mm and a pressing force of 130 tons, it is suitable for metal fabrication companies, sheet metal processors, mechanical engineering, switchgear manufacturing, enclosure production, construction machinery, and general industrial bending applications. The machine is equipped with the DELEM DA66S CNC control system. It supports 2D touch-graphic programming, 3D product simulation, a 24-inch color display, a USB interface, and optional Industry 4.0/OPC-UA connectivity. This allows even complex bending tasks to be programmed efficiently and produced with high repeatability. Key technical data: • Model: SENFENG BDE13032 • Press force: 1300 kN / 130 tons • Working length: 3200 mm • Frame distance: 2600 mm • Stroke: 400 mm • Upper beam stroke: 200 mm • Open height: 480 mm • Dimensions: approx. 3700 × 1515 × 2630 mm • Machine weight: approx. 8120 kg • Main servo motor: 10.8 kW • X-axis travel: 480 mm • X-axis speed: 400 mm/s • X-axis accuracy: ±0.02 mm • R-axis speed: 200 mm/s • R-axis accuracy: ±0.05 mm Bending capacity at 3200 mm bending length: • Carbon steel: up to 4.5 mm • Stainless steel: up to 3 mm • Aluminum: up to 7 mm Bending accuracy: • Angular accuracy over the entire length: ±30′ • Straightness accuracy over the entire length: ±0.15 mm • Dimensional accuracy of the bending length: ±0.15 mm The machine bed is made of Q235B steel and offers high toughness, impact resistance, and long-term stability. The integrated tongue-and-groove welded structure increases welding strength and reduces the risk of deformation. The frame and upper beam are precisely machined as a unit to reduce positioning errors and ensure stable bending performance over long periods of use. The CNC-controlled compensation table compensates for the deflection of the upper and lower beams during the bending process. The CNC system calculates the necessary compensation based on the bending load and automatically adjusts the wedges. This ensures that the bending angle remains constant over the entire sheet metal length. Main configuration: • DELEM DA66S CNC control • REXROTH hydraulic control • HYTEK oil pump • SCHNEIDER main electrical system • HIWIN drive components • SKF cylinder seals Nsdpfxozhgltj Ag Towh • SENTEK / GIVI magnetic scale • CNC-controlled deflection compensation • European standard upper and lower tooling • LED lighting in the work area • Adjustable front sheet support with linear guide Optional equipment includes a DSP safety light curtain, a WILA New Standard clamping system, VERA hydraulic clamps, double-sided quick clamps, and smart factory LAN connectivity. Depending on the configuration and market version, the series has SGS and other relevant certifications. SENFENG Germany offers professional consulting, installation, commissioning, training, and after-sales service. The BDE13032 is a reliable solution for companies seeking precise bending, a stable machine structure, modern CNC control, and long-term production efficiency.

Condition: excellent (used), Year of construction: 2008, operating hours: 64 h, functionality: fully functional, color channels: 5, paper width (min.): 375 mm, paper width (max.): 520 mm, - Ryobi PCS-H - Turning ratio: 2:3 / 5:0 Nwsdpfszduu Uox Ag Teh - RYOBI semi-automatic plate changer - IR dryer - Grafix Digital 3000 powdering machine - Electronic side guide control - Electronic double sheet detection - Ultrasonic double sheet detection - High-stack delivery - Sheet jogger - Automatic blanket washing system

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, STC-Ref: G-022-7719 Heidelberg SM-74-5, Year: 2010 format: 520x740mm, 5 colors Nwsdezhgunopfx Ag Toh equipped: - Axis Control - new ink- and dampening rollers in 2024 - Alcolor automatic filmdamping - Easyplate - blanket wash-up device - ink-roller wash device managed from console - wash device for impression cylinders - powder sprayer - NO perfecting unit!

Condition: used, Press pressure max 104 t working length ~ 3.100 mm Working width 4 x 240 mm workpiece height max. 490 mm Wemhöner VS 4 S heavy-duty hydraulic strip or beam press for veneering strips, gluing wood, glulam beams, or other pressing tasks. The press has four independently controllable pressing surfaces. Nodpoy Emwaefx Ag Tjwh A glue applicator is also available.

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Nwodpfxezdpcts Ag Tsh Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 x 65 cm Condition: very good! Video of machine in operation available on request.

Condition: like new (used), - Capacity: 1600 x 50 tons - NC control (touchscreen) Njdpfx Ajzfv Ufog Tswh - 2 hydraulic cylinders - Foot pedal operation - Light curtain safety system - Emergency stop - Lighting - Documentation - 400V

Condition: new, Year of construction: 2024, pressure 60 t stroke 400 mm table surface area 800 x 500 mm feed down 4,03 mm/sec feed up 5,82 mm/sec column daylight 820 mm Nsdpfx Asvcrmvjg Towh oil pressure max. in the work cylinder 400 bar oil volume 26 l voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 1,5 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • Pressure cylinder moveable horizontally, • Working table hydraulical adjustable, • Cylinder Ø 150 mm, piston base Ø 85 mm.

Condition: new, Year of construction: 2024, feed under pressure 2,7 mm/sec pressure 100 t stroke 400 mm table surface area 920 x 560 mm feed down 4,25 mm/sec Nwsdpfx Agovcrm Ao Toh feed up 8,22 mm/sec oil pressure max. in the work cylinder 385 bar oil volume 26 l diameter of piston 125 mm column daylight 920 mm voltage 400 V/ 50 Hz total power requirement 4 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,7 x 0,9 x 2,1 m • unused workshop press, (Demonstration machine) • manual and hydraulical operation, • pressure cylinder horizontally moveable, • table can be hydraulically adjusted in height, • Cylinder Ø 175 mm, piston base Ø 125 mm.

Condition: good (used), Year of construction: 2003, functionality: fully functional, color channels: 4, Plus Version: prepared for numbering & perforating unit Perfecting 2:2 Classic Center Powder sprayer Electronic double sheet detector New rollers VARN Kompac III The Heidelberg GTO 52-4-P3 is a professional four-color small-format offset printing press, renowned for its reliability and precision in commercial job printing. This model features an integrated perfecting system, allowing for double-sided printing of sheets in a single pass. Key Technical Specifications Nsdpfx Agey Efqlo Towh Max. sheet size: 360 x 520 mm (B3 format) Min. sheet size: 105 x 180 mm (one side) / 140 x 180 mm (both sides) Printing speed: Up to 8,000 sheets per hour Substrate thickness: 0.03 mm to 0.4 mm Colors: 4 printing units Plus Version: This machine is designed as a "Plus Version," which includes preparation for additional numbering and perforating units (N+P). Control: Equipped with the Classic Center for central control of ink supply and register.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Nwjdjzg Tg Uepfx Ag Tsh Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1979, Immediately available ex-location: Nwjdpfxozg Tg Ie Ag Tjh Hydraulic high-speed press Lauffer Type EPT 25 Year of manufacture: 1979 Inspected according to UVV Press force 25 t Stroke 160 mm Installation height 320 mm Throat depth 230 mm Table 500 x 360 mm Ram 250 x 210 mm Weight 2 t Drive power 7.5 kW Price: EUR 2,750 plus VAT, ex-location.

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Njdpfx Agozg Tgzs Tewh Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: good (used), Year of construction: 2012, functionality: fully functional, Strautmann bale press, type BaleTainer, pressing force 60 t, year of manufacture 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Nodpszcuz Tofx Ag Tewh Year of manufacture: 2012 Pressing force 60 t Total connected power 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 straps Bale weight up to 400 kg (3 straps) Binding: 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: Paper, cardboard, PET bottles, film Note: The press is in good working order and has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Nsdpjy Dfcljfx Ag Tjwh Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: as good as new (ex-display), Year of construction: 2022, Briquetting press for aluminum or steel chips Extremely high pressing force of 3,700 kg/cm² 9 kW Large hopper: 600 x 1500 mm Nwjdsw Ig Suepfx Ag Tsh Briquette size: 60 x 40 mm Throughput: Aluminum chips – up to 70 kg/h Steel chips – up to 180 kg/h Brass chips – up to 220 kg/h *depending on the raw material and settings Includes: - Emulsion tank - Emulsion pump - Oil cooler

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm Nwodoyrhyuopfx Ag Tsh dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm