Used Deckel Fp 2 Nc for sale (705)

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop Nwedpfx Ansvbifgefsf >> Operating instructions >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Year of construction: 1987, condition: ready for operation (used), Offered is a Deckel FP4NC vertical milling machine with Heidenhain TNC 355 control. Year 1987, including tool cabinet as well as various tools. Travel distances: X/Y/Z: 560mm/500mm/410mm, dimensions X/Y/Z: approx. 1800mm/1600mm/2000mm, weight: approx. 2400kg. Viewing is possible by appointment. Nwsdpfx Anexyk Upsfsf

Condition: used, x-travel 800 mm Nwjdoqpl Uuspfx Anfjf y-travel 400 mm z-travel 300 mm digital readout Heidenhain table surface area 1000 x 520 mm turning speed range 40 x 2000 U/min spindle taper SK 40 total power requirement 2,2 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 1700 x 1600 x 1800 m

Year of construction: 1990, condition: ready for operation (used), Control: Deckel Dialog 11, with vice, an inspection is possible. Nwjdpsqi D S Ujfx Anfof

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes - year of construction 1987 Technical data Working range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 - Tool holder: SK40 (M16) - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Nwedpfju Awlzox Anfjf Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping Nodpfx Aswhk Ubsnfswf - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Nodpfsxcbl Dsx Anfjwf Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: excellent (used), functionality: fully functional, -KOM 3149- On offer here is a slotting head for a Deckel FP2 milling machine. The slotting head can be rotated 360 degrees on the flange plate. All guide surfaces are in very good condition. The dimensions of the slotting head can be found in the last picture. Nwedpfewxxd Ssx Anfof

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2 in special paint finish light gray with 3-axis digital display K+C NEW Technical data: >> Machine no. 5983 Year of construction approx. 1975 >> Rigid angular table (newly revised) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2,2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 Nwodpfx Anou I Rm Nofef >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital display K+C Newly assembled with manufacturer's warranty. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Operating instructions for digital display >> Coolant device To the machine : We offer a universal milling machine Deckel FP2 in good condition. The Deckel has very little crank play and all spindles can be moved easily. The machine has been completely dismantled and repainted. An oil change has been carried out. Mechanically and electrically tested. The digital display from K+C makes work easier and even more accurate. You also have a 1 year guarantee on the new digital display. Take the opportunity to inspect and try out the lids on site under power. The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake Nwsdpjvb Ud Uefx Anfef >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Nwjdpfx Ansu Nvwvofjf Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Digital Readout Heidenhain, infinitely variable feed, in very good condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2202-10163 >> Fixed angle table >> Spindle speeds: 25 - 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quill - SK40, extendable >> Drawbar system S20x2 >> Weight approx. 1400 kg Nwedpfxoxghtvs Anfjf Accessories and Equipment: >> 3-axis digital readout from Heidenhain >> Coolant system >> Mechanical central lubrication About the machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The FP2 has very little backlash, and all spindles move smoothly. The machine runs quietly even at maximum speeds. On this newer FP2 model, the feed rate is infinitely adjustable on all three axes, and each axis is equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and improves precision. You are welcome to view and test the machine under power at our facility.

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 milling machine equipped with a 3-axis Heidenhain TNC113 active control, notable for its ease of operation. This modern version, built in 1989, features central lubrication, an electric coolant pump, and a machine lamp, among other benefits. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site at any time. Nedpjpy Eldjfx Anfowf Delivery time: on request Machine no.: 2102-xxxx Table: Rigid angled table or rotary-tilt-swivel table Travel (X/Y/Z): X 300 mm / Y 160 mm / Z 340 mm Quill travel: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool taper: SK40 Feed: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: 3-axis Heidenhain TNC113 digital readout with active control, infinitely variable feed regulation on all 3 axes, coolant unit, central lubrication, technical documentation, leveling feet, safety equipment (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines undergo thorough inspection - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - If required, you can order additional accessories such as tools, etc., directly - We can also install further equipment such as safety devices upon request - We are happy to handle shipping and/or installation

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm table-size:700 x 470 mm Nwsdpfxocxxyps Anfof spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Deckel FP3 NC Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin

Condition: used, Year of construction: 1983, functionality: unexamined, total height: 1,900 mm, total width: 2,500 mm, total length: 3,000 mm, table width: 560 mm, table length: 1,400 mm, position of the milling head: Schwenkkopf, space requirement width: 2,500 mm, space requirement length: 3,000 mm, space requirement height: 1,900 mm, We are offering this used Deckel FP4NC milling machine, year of manufacture 1983. Table dimensions: 1,400/560 mm, swiveling head, SK 40 tool holder, Dialog 4 path control, installation dimensions: 300/250/190 cm. Heavy-duty robust design with slant bed. 8 SK40 tool holders and a machine vice are also available upon request. Nedpfjx Sygnjx Anfewf Location: 89312 Günzburg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Nwodpfx Anowrdu Asfof Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 Nedpfx Aey Enwuonfswf - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Nwsdpfjy E I R Ijx Anfsf

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Nwedjy Awz Ropfx Anfof Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Condition: used, Deckel milling machine FP1 with 3-axis digital readout, 380V, 120–1900 rpm. Travel distance X-axis: 300 mm, Y-axis: 150 mm, Z-axis: 340 mm. Tool holder: MK 4 with draw thread S 20 x 2. Milling head type: Vertical milling head. Table type: Fixed table. Table clamping area: 600 x 210 mm. T-slot size: 12 mm. Feed X-axis: 290 mm, Y-axis: 150 mm, Z-axis: 330 mm. Weight: 700 kg. Deckel FP1 milling machine. Nwodpfx Anoy Ddd Uofsf

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Nwodpepmrpxefx Anfjf Weight:700 kg Cover milling machine FP1 ID: M100000409

Condition: excellent (used), Deckel FP 3 Milling Machine 3-axis digital readout FAGOR Innova 30i-M, new 500 mm 300 mm 380 mm SK 40 drawbar thread S 20 x 2 Vertical milling head 40 – 2,000 rpm, 18 speeds Universal table 800 x 420 mm Nwodpfxsymffke Anfof 12 mm approx. 1,500 kg approx. 1,400 x 1,800 x 1,900 mm Centralized manual lubrication Coolant system Operating manual Completely overhauled by Harich in 2000!

Condition: good (used), Tool milling machine DECKEL FP 33 incl. 3-axis digital readout / Heidenhain - Three-axis digital readout Heidenhain - Technical data sheet: see image - Various accessories - Crane - Documentation Nedpfx Asy Efyajnfewf Dimensions (LxWxH): 2x5x2x2.8 meters / Weight: 4500 kg Errors and input mistakes excepted.

Condition: used, Universal tool milling machine with active digital display DECKEL Type FP 1 Universal milling machine Machine No. 2102 - 3351 Year of manufacture: 1986 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Nsdpfxjyxy Swe Anfowf Spindle speed: 40-2000 rpm, 16 steps Feed rate: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.6 and 2 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Active digital readout for 3 axes HEIDENHAIN Type TNC 113 - Infinitely variable feed via servomotor in X, Y, and Z axis - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on the vertical milling head: 60 mm - Vertical milling head can swivel and extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated into machine base - Free-standing control cabinet - Original chip tray for placing on machine base - Operating manual, electrical diagram, spare parts list available in PDF format Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 830 kg Good condition

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Deckel FP1 milling machine with Heidenhain TNC113 digital readout in very good condition. Technical specifications: Year of manufacture: 1989 Machine no.: 2102-5533 * Speed: 40 - 2000 rpm * Infinitely variable feed on 3 axes Nwsdpeytcarofx Anfsf * Rapid traverse on 3 axes * Spindle brake * Table movement X/Y/Z: 300/160/340 mm * Vertical milling head can be adjusted 100 mm on the spindle block * Vertical quill * Drawbar system SK40/M16 * Weight approx. 800 kg Accessories and equipment: 3-axis digital readout Heidenhain TNC113 Coolant system Central lubrication Operating manual, spare parts diagram