Used Deckel Fp 4 Nc for sale (709)

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - partially overhauled, newly painted RAL 7035 light gray / RAL 7046 telegray2 / RAL 5008 gray-blue Mach. no.: 7138 Milling head type: 2013 Milling head number: 2013-2856 Guarantee: 6 months single shift from delivery, on the mechanics partially overhauled by us. Geometric acceptance with test report Accessories: - 3-A digital display EASSON ES-8A, as good as new - Fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40, long version Hnjdpfxohqg Tle Ag Neu with tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: used, X-way 800 mm Y-way 300 mm Z-way 400 mm Speed 40 - 2000 rpm. ISO 40 mounting Hjdpfx Agsbq Dbae Njnu Feed rate 10 - 500 mm/min. Spindle motor 2,2 KW

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 Hnedpfx Ajcxxp Tjg Neu quill stroke:60 mm milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Hodpfx Agou Nc Tws Nsnu Machine can be demonstrated under power. *

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: Hneder En Dyjpfx Ag Nou - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: used, 3 axes digital display Heidenhain ND780 Cooling device Mechanical central lubrication Rigid angle table X-way 400 mm Y-way 220 mm Z-path 400 mm Hnodpfsbu U Nnjx Ag Nsu Speed 25 - 2500 rpm feed stepless in 3 axes Rapid feed in 3 axes Spindle brake Vertical milling head movable on spindle stand 150 mm Vertical quill and horizontal quill - SK 40 extendable Tightening system S20x2 Weight approx. 1400 kg

Condition: used, machine/vehicle number: 0736, x-travel:800 mm y-travel:300 mm z-travel:400 mm work table::1000 X 440 spindle turning speed range:40 - 2000 RPM/min turning speeds steps:18 feed range:10-500 mm/min feed steps:18 rapid traverse:1,50 m/min inner taper of milling spindel:SK40 total power requirement:2,2 kW Hnjdpfx Agocxxyhj Neu weight of the machine ca.:2 t dimensions of the machine ca.:1,57 x 1,68 x 1,85 m Deckel FP2 LB Universal Milling Machine - Spilndle Head can be swiveled left or right (90°) - Rigid Angular Table: 1000 x 440 mm - Quick lever for Rapid Feed Travese Seperate Power cabin and has a Chip tray for clean safe working Area.

Condition: used, Year of construction: 1985, Technical details: x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit Hsdou Ndcmjpfx Ag Njnu *

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee Hedpfjh Rv U Esx Ag Nenu geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: reconditioned (used), Year of construction: 1976, Universal tool milling machine Make: DECKEL Model: FP 2 Year of manufacture: 1976 - overhauled, repainted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Hnsdpfsd Tytyox Ag Nsu Mach. No.: 6976 with guarantee geometric acceptance with test report Accessories: - 3-A digital display FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Coolant system - Operating instructions -used, as seen-

Condition: reconditioned (used), Year of construction: 1986, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1986 - partially overhauled, newly painted, RAL7035 light gray / RAL7042 traffic gray A RAL5008 gray blue Mach. No.: 2102-3014 Hnodpfjr En D Iex Ag Neu Milling head type: 2171 Milling head number: 2955 Guarantee: 6 months single shift from delivery, on the mechanics partially overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X, Y and Z axes - Universal table 590 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant system - Operating instructions Used as seen The machine is technically compliant with the state of the year it was built.

Year of construction: 1978, condition: refurbished (used), Universal tool milling machine Hnsdpfx Aedf E H Aeg Nou Make: DECKEL Model: FP 1 with stepless feed year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Year of construction: 1976, condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 year of construction: 1976 - overhauled, new painted Hnodpsd S Hztofx Ag Nju RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue machine no.: 1601 Milling head type: 2027 Milling head number: 1483 with warranty geometric acceptance with test report accessories: - 3-A digital display FAGOR Innova 30i-M, new - fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Central lubrication, manually operated - coolant device - Operating instructions -used, as seen-

Condition: repair required (used), Year of construction: 1995, operating hours: 18,000 h, functionality: limited functionality, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, For sale is a DECKEL MAHO DMU 80 T, a robust and precise 3-axis machining center with a large clamping area. The machine is still connected to power and operational—a test run can be arranged upon request. However, an overhaul of the axes is necessary. On-site loading can be organized. Technical Data: Travel (X/Y/Z): 880 / 630 / 630 mm Clamping surface: 1250 x 700 mm Table load: 600 / 500 kg Spindle taper: SK 40 (DIN 69871) Speed range: stepless 20 – 12,000 rpm Control: HEIDENHAIN TNC 426/430 Feed (X/Y/Z): stepless 20 – 15,000 mm/min Rapid traverse: 30 m/min Tool changer: 25 stations Tool data: Ø 80 / 130 mm | Max. length: 315 mm | Max. weight: 8 kg Total power requirement: 60 kW Machine weight: approx. 9.6 t Dimensions (L x W x H): 4.53 x 2.60 x 2.50 m Accessories Electronic hand pendant Hnsdpfoxphdgsx Ag Nou Chip conveyor (screw conveyor) Coolant system ✅ Your advantages at a glance: Immediately ready for operation – machine is connected and can be tested Heavy-duty 3-axis machining center High spindle speeds & feed rates for efficient machining On-site loading possible Attractive price-performance ratio Location: 69181 Leimen Fixed price: €10,000 If you are interested or would like to arrange a viewing/test run, please get in touch!

Condition: good (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Tool magazine is not in operation !!! Hsdpfor H D Aksx Ag Nsnu

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Hsdpfx Aeu Dm E Hog Nenu Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: new, Year of construction: 2025, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system Hodpfxjh Sptno Ag Nsnu 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, Universal milling machine Deckel FP1 repowered by FPS in year of construction 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 55249/08 Year of construction 2010 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm Hodpfx Agowpi A To Nonu >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vice >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A Deckel FP1 universal milling machine repowered by FPS in as-new condition is being offered. The accessories include a hydraulic vice with rotary plate, collets, tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital display makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is available immediately.

Condition: new, Year of construction: 2025, General refurbished, as good as new machine, modernized to the legally prescribed safety standard "state of the art" according to the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS active - digital display Speed 50 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling performance Feed rate 6,3 to 630 mm/min, infinitely variable rapid traverse 1,3 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 500/400/400 mm Table Rigid angular table 800x460mm Hnedpfx Agoh R S Tcs Nju Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, Universal Milling Machine Deckel FP1 repowered by FPS in year of manufacture 2010 with 3-axis digital display Heidenhain ND 780. Like new!! Technical Data: >> Machine no. 2101-51084 Year of manufacture 2011 >> Fixed angle table >> Speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 KW >> Travel range X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 700 kg Accessories and equipment: Hnjdpjwpi Dqjfx Ag Nju >> 3-axis digital display Heidenhain ND 780 >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant device About the machine: A universal milling machine Deckel FP1 repowered by FPS is being offered in like-new condition. The accessories include a hydraulic vise with rotary table, collet tool holder, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and try out the Deckel on-site under power. The machine is immediately available.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Universal milling machine Deckel FP2 repowered by FPS built in 2013 with 3-axis digital readout Heidenhain ND 780 As good as new !!! Technical data: >> Machine no. 2202-7020 FPS no. 3364 Year of construction 2013 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power .:2.2 KW >> Travel X/Y/Z: 400/200/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK- 40 >> Tightening system S20x2 >> Weight approx. 1100 kg Accessories and equipment: >> 3-axis digital readout Heidenhain ND 780 >> Brake motor with immediate spindle stop >> Central lubrication >> 2 x emergency stop >> Operating instructions >> Coolant device Hnsdpfovbifgjx Ag Nju To the machine : We offer a universal milling machine Deckel FP2 repowered by FPS in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has an electric central lubrication system. With two emergency stop switches for safety. Mechanically and electrically tested as of 2013. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out the lids under power on site. The machine is available immediately.

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm Hnjdpfx Ael Dx I Ssg Nju - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: used, functionality: fully functional, x-axis travel: 400 mm y-axis travel: 220 mm z-axis travel: 400 mm Hjdpfx Agoxphn Ej Nonu Speed range: 40 - 2000 rpm Speed steps: 18 Internal taper: SK40 Spindle head movement automatic/manual: 190 / 200 mm Clamping surface (table): 730 x 240 mm Table longitudinal travel automatic/manual: 390 / 400 mm Table vertical travel automatic/manual: 390 / 400 mm Feed range: 8 - 400 mm/min Rapid traverse: 1200 mm/min Electronic digital display SONY Rotary table Sheet steel cabinet with 5 drawers and various machine accessories, e.g. various spare parts, tool holders, milling cutters, exchangeable table

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Hjdpfxsxnniao Ag Nonu Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: used, functionality: unexamined, machine/vehicle number: 2820-0520, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, quill stroke: 80 mm, table length: 700 mm, table width: 460 mm, rotational speed (max.): 4,000 rpm, ★★★ CNC Tool Milling Machine Deckel FP3A ★★★ ● Machine Number: 2820-0520 ● Condition: Not tested ● Delivery Terms: Free loaded on truck – Unpacked ● Location: Sprockhövel ● Availability: Immediate Hnjdpfx Aew Aicyjg Neu ● Payment Terms: Advance payment – by bank transfer ● Internal No.: DÖRK2 ⚙️Technical Specifications ☑️Control: Grundig Contour 3 ☑️Tool Holder: SK 40 ☑️Travel: X 400 mm, Y 400 mm, Z 400 mm ☑️Vertical Quill Stroke: 80 mm ☑️Table Dimensions: 700 x 460 mm ☑️Vertical and horizontal milling ☑️Speed: up to 4,000 rpm ☑️Vertical milling head adjustable on spindle block: 50 mm ☑️Voltage: 380 V / 50 Hz ☑️Power consumption: 14.5 kVA ☑️Coolant system ☑️Handwheel ☑️ALLMATIC HD 160 vice Scope of delivery ✔ ALLMATIC HD 160 vice ✔ Available manuals (see pictures) Dimensions & Weights ● Installation dimensions L x W x H approx.: 3000 x 3000 x 2200 mm ● Weight approx.: 2,000 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️Be sure to check out our other listings as well⚠️ Additional notes: ►We expressly recommend collection via direct shipment (freight carrier) ►The goods are sold under exclusion of any warranty ►Technical data not guaranteed ►Subject to prior sale ❗The sale of the goods is exclusively to businesses❗