Used Deckel Fp6 for sale (694)

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 - Central lubrication, electric - Coolant system - Operating instructions Fjdpfx Apeh Rv U Eewogb - Drill grinding device with diamond disk -used, as seen-

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey Fedpfx Apjlfc U Dewsgb RAL5008 grey blue Mach. no.: 2203-7097 with guarantee geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamp DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: electron. hand panel, chip conveyor,coolant Fgedpfx Apox Nqu Doweb

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Fgodpfx Aoy Emufjpwob Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2003, Immediately available ex works: 5-axis (3 plus 2) machining centre Deckel Maho Type DMU 35 M Year of manufacture: 2003 Siemens 810 D control Fgodpfjy N Ad Rox Apwjb Electronic handwheel Universal tilting/rotary table 400 x 290 mm Travel X/Y/Z: 350/240/340 mm Spindle taper SK 40 Spindle speeds: 20 – 6300 rpm Drive: 6.3/10 kW Table load: 100 kg Rotation range: 360 degrees Swivel range: plus 105 / minus 15 degrees Distance spindle nose – table: 145/485 mm Feed rates up to 3000 mm/min Weight: 1750 kg Price: Euro 4,500.—plus VAT ex location

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: 5-Axis Machining Centre Deckel Maho Model: DMU 50 M Year of manufacture: 2001 Control system: Heidenhain TNC 124 5 axes (3 + 2) Fodpfey N Ad Dsx Apwsgb Manual rotary axes with B and C swivel rotary table B and C axes are displayed on the control Table size: 700 x 500 mm Travel paths X/Y/Z: 500 / 400 / 400 mm Table load capacity: 200 kg Spindle taper: SK 40 Spindle speeds: 20 – 4,500 rpm Drive power: 9 / 13 kW C-axis rotation range: 360 degrees Swivel range: plus 95 / minus 10 degrees Feed rate up to 5,000 mm/min Spindle speeds: 20 – 4,500 rpm Weight: 3 tonnes Coolant system Price: EUR 8,500.— net, ex-site, plus VAT.

Condition: ready for operation (used), Year of construction: 2000, Immediately available from Swiss toolmaking: 5-axis milling machine Deckel Maho Type DMU 35 M Fgedpfx Apsy Nz Uzoweb Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table 400 x 280 mm Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Infinitely variable spindle speeds: 0 – 5,000 rpm Taper SK 40 Rapid traverse 5 m/min Servo motors for X/Y/Z axes Swivel range 360 degrees Table clamping plus 105/minus 150 degrees Weight 2 t Accessories, hydraulic vise Price: EUR 5,000.—plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm Fsdjy Nz Uhopfx Apwogb X-axis stroke: 150 mm Drive: 3 kW Roughing spindle Finishing spindle Locking arm Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex location: CNC tool milling machine Deckel, type FP 5–80, year of manufacture 1995, CNC control Dialog 12, universal table 750 x 520 mm. Travels X/Y/Z: 800/550/500 mm. Drive power: 9 kW. Quill stroke: 80 mm. Electronic handwheel. Spindle speeds: 32–5000 rpm. Feeds: 0–6000 mm/min. Weight: 4.5 t. Price: EUR 2,750 plus VAT, ex location. Fsdpfey Nz T Rex Apwogb

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe Fsdpfxeymcvms Apwsgb • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 1996, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Travel distances: X= 600, Y= 400, Z= 400 mm Fjdpfxoy Eyfws Apwsgb Table size: 900 x 480 mm Spindle speed: 40 - 4,000 rpm Dimensions LxWxH: 2500 x 2200 x 2200 mm Weight: approx. 3,000 kg

Condition: good (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, rapid traverse X-axis: 20 m/min, controller model: Siemens Sinumerik 840 D, total height: 2,100 mm, total length: 3,800 mm, total width: 3,600 mm, table load: 100 kg, rotational speed (max.): 15,000 rpm, overall weight: 1,600 kg, For sale is a 5-axis machining center from DMG, model DMU 35 M, equipped with two manual axes. The machine is in good condition. Technical specifications: DMU 35 M Year of manufacture: 2001 X-axis: 350 mm Y-axis: 240 mm Z-axis: 340 mm Spindle speed: 15,000 rpm Feed rate: Infinitely variable up to 5,000 mm/min Fgsdpey Nz Nrsfx Apwob Rapid traverse: 20 m/min Clamping surface: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool holder: SK 40 Tool clamping: pneumatic/mechanical Required space: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be arranged for an additional charge, Europe-wide. All prices are subject to VAT. Inspection by appointment is possible. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Condition: used, Year of construction: 1998, x-travel 500 mm y-travel 420 mm z-travel 500 mm spindle taper SK 40 table surface area 700 x 400 mm table load capacity 800 kg control Heidenhain TNC 426 rated capacity 40 kVA voltage 400 V weight of the machine ca. 6,5 t dimensions of the machine ca. 3,4 x 3,7 x 2,9 m DECKEL-MAHO machining centres are suitable for manual and automatic operation. --> Area of application MILLING: --> DRILLING: --> Face milling --> Face countersinking --> Circular milling --> Circular drilling --> Screw milling --> Screw drilling --> Gear milling --> Profile drilling --> Profile milling --> Form drilling --> Form milling --> Including vertical tool changer with double gripper --> Tool magazine, variable space coding (VPC): --> Number of tools: 20 --> Standard tool - max. Ø: 90 mm Fjdpfx Ajw Inrvspwsgb --> Special tool - max. Ø with free neighbouring spaces: 140 mm --> Max. tool length from spindle nose: 300 mm --> Max. tool weight: 12 kg

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details. Fodpfey Hktbjx Apwogb • Table size: 1000 x 600 mm • Tool magazine: 2x12 positions • Under power and well maintained machine. Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm Fodpey A Tdnofx Apwogb z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Fgodpfx Apowid Spswob Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable Fjdpfsy H Ibcsx Apwegb >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: used, Year of construction: 2003, operating hours: 64,930 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 400 kg, rotational speed (max.): 12,000 rpm, Required space: approx. 3.5 x 2.5 x 2.5 m (L x W x H, without chip conveyor) Machine weight: approx. 6,300 kg Fsdpfx Ajy Ncnpjpwjgb

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: Fjdpjy Iwdpofx Apwsgb 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach Fgsdpfepumdcox Apwob size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: ready for operation (used), Tool Milling Machine DECKEL FP 2 / with Heidenhain 3-Axis Digital Display - Original paint / Well-maintained overall condition Fsdpjy Rgk Defx Apwegb - Heidenhain 3-axis digital display - Travel X/Y/Z 450x230x400mm - Table clamping surface 700x350mm - Speed range 40 - 2000 rpm - Feeds / rapid traverses on all three axes - Tool holder ISO 40 - Vertical / horizontal milling device with vertical sliding head - Coolant system - Chip pan - Work light - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight 1600 kg Subject to errors and input mistakes.

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. The machine can be viewed under power. Fgjdewqdtpspfx Apwjb The machine is bought as is. No warranty.

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Fsdpeu Hkb Rjfx Apwjgb Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Fgedpfx Aer Elwkspweb Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: Mill Plus, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine. Fgsdpfx Apsx D Iunswsb • Spindle cooling: Active cooling • Cooling: Air or coolant • Internal coolant supply: 40 bar (through-spindle) • Tool changer: 32 stations • Operating mode: Mode 4 (working with open door) Additional equipment • Belt filter system: Interlit SPD 3-600-HD • Mist collector • Rotoclear viewing window • Control cabinet cooling unit