Used Deckel for sale (685)

Condition: excellent (used), Year of construction: 2024, operating hours: 882 h, functionality: fully functional, machine/vehicle number: C-A3435F, travel distance X-axis: 1,100 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, spindle speed (min.): 20 rpm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, table width: 600 mm, table length: 1,400 mm, space requirement width: 2,750 mm, space requirement length: 2,750 mm, space requirement height: 2,250 mm, input frequency: 50 Hz, 3-axis milling technology with maximum rigidity + InLine spindle with 10,000 rpm + Tool magazine for 24 tools + Chip tray + 3D data model + IoT connector and NETservice -Signal lamp, 4 colors Ledoy U D Tdspfx Afwsaf Red: General malfunction Yellow: Machine intervention required Green: Machine in automatic mode Blue: Machine in setup mode

Condition: good (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rotational speed (max.): 14,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, rotational speed infinitely variable, Machine has 2 pallet. Control is Siemens. Spindle was changes directly frm DMG servis - new spindel has cca 500 hours Lsdpfxsv Acpbj Afwjaf

Condition: used, Year of construction: 2002, operating hours: 14,704 h, functionality: limited functionality, machine/vehicle number: 15115220654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 660 mm, controller model: Heidenhain iTNC 530, workpiece weight (max.): 2,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel range X-axis: 2,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 660 mm Rotation B-axis: 105° Spindle speed: max. 18,000 rpm Interface: SK40 Table size, length: 2,600 mm Table size, width: 600 mm Workpiece weight: max. 2,200 kg Ledpfxjzdd Tns Afwoaf MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions and weight Dimensions (L x W x H): 6,000 x 3,700 x 2,900 mm Dry weight: 12,500 kg Operating hours: 14,704 h EQUIPMENT Fourth axis with 550 mm clamping surface and hydraulic tailstock Heidenhain measuring probe Spindle cooling Measurement log Coolant tank Filter separator Documentation CE marking Note: Machine vices are not included. The machine is not immediately ready for operation and requires minor repairs. A linear field segment is causing problems.

Condition: used, Conventionally controlled universal tool grinding machine / scriber grinding machine Type / Model: Deckel S1 Condition: Used Lasdpjzmrzwsfx Afwof Year of manufacture: 1980s Technical data Center height: 65 mm - 95 mm Center distance: max. 250 mm Grinding diameter: max. 130 mm Table dimensions: approx. 470 x 175 mm Spindle speed: 3,750 rpm to 7,500 rpm, adjustable in two stages Motor power: 0.6 / 0.75 kW; 400 V Equipment: - Wedge shoes - Collet chuck holder MK 4 Request item: Transportation costs will be provided in a separate quote.

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Lsdpfxszqulao Afwoaf Horizontal + vertical spindle Cone CM4 DECKEL Spindle speed: from 40 to 2000 RPM Horizontally tiltable head Spindle motor: 2 speeds Motor: 1,5 kW Feeds: X - Z auto / Y manual Supplied without table only with one 4 concentric jaws Ø 140 mm Voltage: 380 V Width: 1200 mm Depth: 1200 mm Total height: 1600 mm Weight: approx 900 KG

Condition: used, Universal Milling Machine DECKEL FP1 Travel X: 300 mm Travel Y: 150 mm Travel Z: 300 mm Horizontal + vertical spindle Cone SA40 DECKEL Spindle speed: from 40 to 2000 RPM Table size: 600 x 210 mm Horizontally tiltable head Straight table Spindle motor: 2 speeds Motor: 1,3 kW Feeds: X - Z auto / Y manual Laedszquk Ajpfx Afwof Voltage: 380 V Width: 1200 mm Depth with electrical panel: 1200 mm Height:1600 mm Weight: approx 900 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 2,000 kg, The machine is running without any problems and will now be idle for a period of time as it is no longer needed. Travel ranges: X: approx. 485–500 mm Lasdpfx Afjzquftowef Y: approx. 385–400 mm Z: approx. 380–400 mm Spindle: SK 40 DECKEL Dialog 2 / Contour 2 control system Table: universal, swiveling and rotating

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Spindle specifications: Spindle taper: ISO 40 / BT / MK Lasdpfowrdu Aex Afwsf Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: used, Univ. universal milling machine with active digital display, DECKEL type FP 1 Universal milling machine Machine No. 2102 - 6130 Year of manufacture 1991 Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 210 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate 5 to 500 mm/min Rapid traverse 1200 mm/min Motor power 1.6 and 2 kW, pole-changing Mains connection 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN type TNC 113 - Stepless feed in the X, Y and Z axes - Spindle speed controlled via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable 100 mm - Fixed tilting table 600 x 210 mm - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Protective enclosure with hinged doors around the machine table - Original chip tray for mounting on the machine base Lodpfjzinzxsx Afwjaf - Machine lamp - Counter holder with counter bearing - Electrical diagram available Space requirement L x W x H 1600 x 1250 x 1750 mm Weight 900 kg Good condition

Condition: used, Univ. universal milling machine with active digital display, DECKEL Type FP 1 Machine No. 2101 - 7088, Year of manufacture 1993 Lajdpfx Afjziny Iswjf Travel distances X: 300 mm, Y: 150 mm, Z: 330 mm Table size 600 x 200 mm Spindle mounting SK 40 - S20x2 Spindle speed 40-2000 rpm, 16 steps Feed rate X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.6 and 2 kW, pole-changing Power connection 380 Volt, 50 Hz - Active control and digital display for 3 axes, HEIDENHAIN Type TNC 123 - Stepless feed rate via servo motor in the X, Y, and Z axes - Spindle speed via 2 motor speeds and 8 gear stages - Quill travel on the vertical milling head 60 mm - Vertical milling head swiveling and horizontally extendable by 100 mm - Swivel, rotary, and tilting angle table DECKEL, Type 2114 - Coolant system in the machine base - Central lubrication - Adjacent control cabinet - Hinged protective shield with safety switch - Original chip tray for mounting on the machine base - Electrical diagram available Space requirement L x W x H 1600 x 1200 x 1770 mm Weight 900 kg Good condition

Condition: used, Year of construction: 1998, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock Number 1039-8700 Machine Type Machining Center - Vertical Manufacturer DECKEL MAHO Type DMU 125 T Year of Manufacture 1998 Control TNC 426 Heidenhain Location D-59302 Oelde Country of Origin Germany Delivery Time Upon Agreement Incoterms EXW (Ex Works) Additional Information CNC - Vertical Machining Center DECKEL MAHO - DMU 125 T - Coolant Through Spindle (CTS) Technical Details X-axis travel 1,250 mm Y-axis travel 880 mm Z-axis travel 800 mm Control TNC 426 Heidenhain Main Spindle: Spindle Speed Range - Main Spindle max. 12,000 min/-1 Drive Power - Main Spindle 15 / 10 kW Max. Torque 500 Nm Tool Interface SK 40 Work Table: Table Surface Area 1,500 x 1,050 mm Max. Table Load 2,500 kg Number of T-slots 10 T-slot Width 18 H7 mm T-slot Spacing 100 mm Tool Changer: Number of Tool Positions 30 Max. Tool Diameter 80 mm Max. Tool Diameter with Free Neighboring Position 160 mm Max. Tool Length 315 mm Max. Tool Weight 8 kg Lodpfx Ajzfzhdofweaf Max. Total Weight 100 kg Feeds: Rapid Traverse (X / Y / Z) 15 m/min Feed Rate 10,000 mm/min Total Power Consumption 29 kW Machine Weight approx. 16.0 t Space Requirement approx. 7.0 x 5.0 x 3.3 m Accessories Documentation Chip Conveyor Coolant System High-Pressure Cooling Internal Coolant Supply Tool Changer Measuring Probe Heidenhain Electric Handwheel

Condition: used, Year of construction: 1999, functionality: fully functional, DECKEL MAHO - DMU 125 T Offer Details Stock Number: 1039-8230 Machine Type: Machining Center - Vertical Manufacturer: DECKEL MAHO Type: DMU 125 T Year of Construction: 1999 Control: TNC 430 Heidenhain Location: D-59302 Oelde Country of Origin: Germany Delivery Time: Upon agreement Incoterms: EXW (Ex Works) Additional Information: CNC - Vertical Machining Center DECKEL MAHO - DMU 125 T Technical Details X-axis travel: 1,250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Control: TNC 430 Heidenhain Main Spindle: Spindle Speed Range: max. 12,000 min/-1 Drive Power - Main Spindle: 15 / 10 kW Max. Torque: 500 Nm Tool Holder: SK 40 Ledpfszfzgtox Afwjaf Work Table: Table Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-slots: 10 T-slots - Width: 18 H7 mm T-slots - Pitch: 100 mm Tool Changer: Number of Tool Positions: 60 Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent position: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Max. Total Weight: 100 kg Feeds: Rapid Traverse (X / Y / Z): 15 m/min Feed Rate: 10,000 mm/min Total Power Consumption: 29 kW Machine Weight (approx.): 16.0 t Space Requirement (approx.): 7.0 x 5.0 x 3.3 m Accessories Documentation Chip Conveyor Coolant System Tool Changer

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Laedpfxjza T A Do Afwjf Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: ready for operation (used), Year of construction: 1996, operating hours: 12,800 h, number of axes: 5, This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine. Additional equipment Ledpfox U Tinox Afwsaf • Hainbuch Hydraulic Vise for BZI32 Collet Machine Benefits Technical Machine Benefits • Machine is operated with a motor encoder due to c-axis encoder currently defective. • Internal cooling: 40 bar • External hydraulic unit for clamping devices • Counterholder on the rotary table • Rotary union on the table • Tool positions: 24 tool positions – 2 partially available (space is broken) • Measuring probe: renishaw – prepared Extra Information • Machine still under power • Space requirement: 4200x2000mm (with the cooling unit) • Control: Millplus DV400

Condition: excellent (used), Year of construction: 2005, operating hours: 62,289 h, functionality: fully functional, machine/vehicle number: 15035709574, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 18,000 m/min, nominal power (apparent): 55 kVA, controller manufacturer: Heidenhain/Mill Plus, controller model: Heidenhain/Mill Plus, workpiece length (max.): 600 mm, workpiece width (max.): 400 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 600 kg, total height: 2,900 mm, total length: 2,900 mm, total width: 2,650 mm, table width: 500 mm, table length: 700 mm, table load: 600 kg, overall weight: 7,400 kg, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-axis CNC machining center Deckel Maho DMU 70 Evolution Control system: Heidenhain / Mill Plus Tool magazine: 60 tools Year of manufacture: 2005 Country of origin: Germany Machine parameters: - Axis X travel: 750 mm, Axis Y travel: 600 mm, Axis Z travel: 500 mm - Axis B: 180 degrees - Axis C: +/- 360 degrees - Feed rate range: 18,000 mm/min - Rapid traverse rate: 50 m/min - Max spindle motor power: 20 kW - Tool holder: SK 40 - Work table dimensions: 700x500 mm Ledszvdb Iepfx Afwoaf - Work table load capacity: 600 kg - Chip conveyor - Coolant system - Complete programming manual - Technical documentation - Machine weight: approx. 7.4 tons - Machine dimensions: approx. 2,900 x 2,650 x 2,900 mm The electrospindle was replaced in 2023.

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1,400 rpm, type of input current: three-phase, overall weight: 1,000 kg, number of spindles: 1, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka Maximum height of the universal headstock: 170 mm Maximum height of the tailstock: 120 mm Maximum height of the tailstock with intermediate bearing: 170 mm Largest workpiece diameter between centers: 338 mm Largest workpiece diameter with floating support: 600 mm Largest distance between centers: 950 mm Internal taper of the headstock spindle: MK 4 T-slots in the machine bed: 12 mm T-slots in other parts: 8 mm Range of movement: Working range, grinding stroke: 190 mm Transverse adjustment of the tool carrier: 100 mm Vertical adjustment of the grinding head: 325 mm Feed of the grinding spindle: 5 mm Rough adjustment range of the tool carrier: 230 mm Grinding head carrier: 800 mm Universal headstock on the tool slide: 330 mm Swivel range of the grinding head carrier: 360° Grinding head: 360°, tool carrier: 360° Universal headstock, horizontal and vertical: 360° Grinding length during spiral grinding: max. 190 mm Ljdpfx Afew Nn Akjweaf Maximum rotation of the headstock spindle during spiral grinding: 1.5 revolutions Grinding wheel, largest diameter: 125 mm Cutting disc, largest diameter: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, a table extension with a center, and is NOTES REGARDING PICKUP: loaded onto a truck, forklift available available immediately

Condition: used, Year of construction: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm Control CNC total power requirement 13 kW weight of the machine ca. 4,5 t Ljdpfx Ast Ii Iwsfwsaf dimensions of the machine ca. m

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. Lsdpfxov Td Els Afweaf • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Ledpfxot Hw Trs Afwoaf Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1995, x-travel 600 mm y-travel 560 mm z-travel 560 mm Control SIEMENS 840 C total power requirement 12 kW weight of the machine ca. 10000 kg Ledpet Hw R Refx Afwoaf dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2012, operating hours: 20,101 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, nominal power (apparent): 70 kVA, controller manufacturer: Siemens, controller model: 3D-Control Siemens 840D, workpiece height (max.): 525 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 240 kg, total height: 2,800 mm, total length: 4,700 mm, total width: 6,000 mm, table load: 240 kg, rotary table diameter: 500 mm, overall weight: 12,000 kg, spindle speed (min.): 18,000 rpm, operating hours of spindle: 20,101 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 300 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Distance spindle nose - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time s: 4.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Rinsing gun Mist collector Programmable coolant nozzles DXF import function Internal coolant supply Lajdpfxjzd Agre Afwef Electrical cabinet active cooling unit Temperature compensation Paper band filter DMG AUTOshutdown DMG GREENmode DMG MACHINEcheck High-Speedd-Setting DMG Netservice-client DMG Service Agent Machine running times Under power: 35687 Spindle Working: 20101 Rated power kVA: 70 Basic machine dimensions / weight Length mm: 4700 Width mm: 6000 Height mm: 2800 Weight kg: 12000

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: chip conveyor, CNC Vertical Machining Center DECKEL MAHO DMC 100 V For sale is a CNC-controlled vertical machining center, DECKEL MAHO DMC 100 V, with Heidenhain control. This machine is ideally suited for tool and die making, single-part production, and general CNC milling operations. Technical specifications: Manufacturer: DECKEL MAHO / DMG Type: DMC 100 V Control: Heidenhain Travel distances X/Y/Z: approx. 1000 / 800 / 500 mm Table size: approx. 1250 × 800 mm Max. table load: approx. 1200 kg Tool holder: SK40 / ISO40 Tool changer: 30/60 positions, depending on the model Spindle speed: up to approx. 15,000 rpm Equipment: Lasdjzh Hxmspfx Afwef Heidenhain CNC control Tool changer SK40 tool holder Renishaw measuring probe Coolant system Chip conveyor Condition: Used Machine is complete Inspection under power possible by arrangement.

Condition: used, Year of construction: 1999, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 430 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 60 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm Ledpfozfqgvjx Afwjaf max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T

Condition: used, Year of construction: 1998, x-travel 1.250 mm y-travel 880 mm z-travel 800 mm control TNC 426 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 500 Nm tool taper SK 40 table surface area 1.500 x 1.050 mm max. table load 2.500 kg number of T-slots 10 T-slot - width 18 H7 mm T-slot - distance 100 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm Lodpjzfqgpofx Afweaf max. tool weight 8 kg max. total weight 100 kg rapid traverse ( X / Y / Z ) 15 m/min feed speeds 10.000 mm/min total power requirement 29 kW weight of the machine ca. 16,0 t dimensions of the machine ca. 7,0 x 5,0 x 3,3 m CNC - Machining Center Vertical DECKEL MAHO - DMU 125 T - ICS

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,500 mm, table load: 400 kg, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. Ljdpfxjzhm Etj Afwjaf • Table size (L x W): 1000 x 600 mm • CNC control: Heidenhain MillPlus • Tool magazine capacity: 20 tools • Through-spindle coolant: Yes Additional equipment • Chip conveyor Dimensions Machine Depth 3000 mm