Used Deep Hole Drill for sale (8,656)

Condition: ready for operation (used), Year of construction: 2023, Universal vertical drilling machine. Can be equipped with any drilling head. Fitted with ruler and stops. Operated pneumatically with a lever switch. Isdpfx Ahoy Rp T Ij Dotk

Condition: excellent (used), Year of construction: 1976, TOYOSK 0-R fixed spindle pitch high speed 12-spindle fine thread drilling machine Itedpfx Aowifgush Dsk Year of manufacture: 1976 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Spindle diameter: 8mm Table feed: 65mm Table surface: 200x260mm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanical, small holes / threads. Power: 0.75kW Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm Isdpfovvx Hisx Ah Detk 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Condition: ready for operation (used), functionality: fully functional, Brierley Universal Automatic Drill Grinder Model: ZB 32 Capacity: 2.5-32mm With Cams Itsdpfxszlhlpj Ah Dsk

Condition: ready for operation (used), functionality: fully functional, total width: 355 mm, total length: 381 mm, total height: 1,270 mm, grinding wheel diameter: 203 mm, Dormer Automatic Drill Grinder Itjdpozlg Szsfx Ah Dok Model: 108

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, actuation type: electric, rotational speed (max.): 1,700 rpm, rotational speed (min.): 25 rpm, total width: 1,070 mm, total length: 2,500 mm, total height: 2,840 mm, table width: 630 mm, table length: 800 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, Special Offer – 5% Discount Available! Industrial Radial Drilling Machine The Industrial Radial Drilling Machine is a robust and reliable solution designed for precision hole machining in production plants, maintenance workshops, and metalworking facilities. Its rigid construction ensures excellent stability, high accuracy, and dependable performance, even during demanding industrial applications. The machine is suitable for a wide range of machining operations, including drilling, reaming, countersinking, boring, and tapping. The large working range and adjustable radial arm allow efficient machining of large and heavy workpieces without repositioning. Main Features * Rigid industrial construction * Wide spindle speed range * High drilling capacity * Suitable for drilling, reaming, boring, countersinking and tapping * Stable and precise operation * Easy machine operation * CE certified Technical Specifications * Maximum drilling capacity: 50 mm * Distance from spindle nose to table: 400–1580 mm * Distance from spindle axis to column: 370–2000 mm * Spindle travel: 400 mm * Spindle taper: MT5 * Spindle speed: 25–1700 rpm * Number of spindle speeds: 16 * Column diameter: 350 mm * Main motor power: 4 kW * Table dimensions: 800 × 630 × 500 mm * Machine dimensions: 2500 × 1070 × 2840 mm * Machine weight: 3500 kg Applications * Drilling * Reaming * Countersinking * Boring * Tapping * Metal fabrication Iodjytf Thepfx Ah Detk * Maintenance workshops * Manufacturing plants Delivery and Support The machine is supplied brand new and includes a 12-month warranty, warranty service, and professional after-sales support. We provide professional transport throughout Europe using specialized heavy machinery logistics. Every machine is securely loaded, protected during transport, and delivered directly to the customer's premises. We also assist with export documentation and international shipping arrangements. Worldwide shipping is available upon request. About Metal Technics Polska Metal Technics Polska is a manufacturer and distributor of professional metalworking machinery. We supply high-quality machines throughout Europe and provide expert technical advice, spare parts, and comprehensive after-sales support. Contact us today for pricing, delivery times, machine availability, additional photos, videos, or a personalized quotation.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Brema EKO 2.2 is the new compact and versatile vertical drilling machine that supports the processing of different thickness and size formats within a reduced footprint. It is the ideal solution for “just in time” production also for more complex routing processing. Maximum machine customization depending on production requirements Maximum manufacturing efficiency thanks to the elimination of set-up times Wide range of processable panels Brema EKO 2.2 – CNC panel machining centre X working field: 3200 mm Y working field: 1250 mm Workable panels (dimensions min. - max.) Dimension MIN (mm) MAX (mm) Length (X) 200 3200 Height (Y) 35 1250 Thickness (Z) 8 60 Max. workable panel weight: 50 kg (*) Panel Height (Y) / Length (X) ratio ≤ 0.75 for panel up to L = 320 mm (°°) Panel Height (Y) / Length (X) ratio ≤ 1.5 for panel L > 320 mm On minimum panels managed with only one gripper clamping, all types of processing can be realized — except those in the gripper interference zone. In case of processing at gripper height, piece tilting may be necessary. All operations must be verified case by case depending on: panel dimensions (especially minimum values), material type, covering, and machining requirements. Itsdpfswnx Ivex Ah Djk Working field of the tools (dimensions min. - max., referring to tool axis) X Axis Operation MIN (mm) MAX (mm) Boring 0 3200 Routing (with electro spindle) 0 3200 (^) Grooving (with saw blade in X) 0 3200 (^) Y Axis Operation MIN (mm) MAX (mm) Boring 0 1250 Routing (with electro spindle) 0 1250 Rf Grooving (with saw blade in X) 25 1250 Z Axis Operation MIN (mm) MAX (mm) Horizontal holes 0 35° Ru (^) With grippers automatic repositioning (°) Max. dimension may be reduced depending on the panel size and gripper positioning

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Ijdpjzdki Ujfx Ah Dotk Energy Saving Mode

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BBM40MAN Hinge Boring Machine – Precision Machining for Furniture Fittings The CORMAK BBM40MAN hinge boring machine is a compact, efficient, and easy-to-use woodworking drill designed for precise drilling of holes for furniture hinges. The machine performs exceptionally well in furniture production, offering repeatable drilling accuracy and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40MAN ensures high-quality performance while remaining simple to operate. Key Advantages Precise drilling for furniture hinges – The adjustable depth stop located at the rear of the machine allows drilling with full parameter control, minimizing the risk of material damage. Compact and stable construction – A rigid base with a large worktable (350 × 300 mm) provides comfort and safety during operation. Powerful 1.1 kW motor – A uniquely strong motor compared with competing machines, providing the necessary torque to work with Blum-type hinges and other hardware systems. Three working spindles – Enable simultaneous drilling of the main hinge cup hole and the side pilot holes. Construction and Technology The CORMAK BBM40MAN hinge boring machine is designed for simplicity, durability, and ease of use. A mechanical feed of the working head with a 110 mm range and manual control ensures full control of the working cycle. The 10 mm tool shank diameter allows the use of standard hinge-boring bits. Compact overall dimensions (370 × 500 × 600 mm) and a weight of 21.5 kg make this hinge boring machine ideal also for on-site assembly work. Precision and Work Efficiency With an optimally selected spindle speed (3000 rpm) and the ability to manually adjust the settings, the operator can quickly and accurately drill holes for any standard hinge type. Adjustable drilling depth allows easy adaptation to different front thicknesses and hinge systems. Stable workpiece clamping and full parameter control minimize assembly errors and increase overall process efficiency. Applications The CORMAK BBM40MAN hinge boring machine is used in: production of kitchen, bathroom, and office furniture, carpentry workshops and maintenance departments, service companies specializing in hardware installation, Iodpfxsxzdics Ah Detk woodworking schools and training centers. Standard Equipment 3-spindle hinge boring head, mechanical fence feed (110 mm), adjustable depth stop, 350 × 300 mm worktable, powerful 1.1 kW motor (230 V), manual control and workpiece clamping, 35 mm cutter + two 2 mm bits for BLUM hinges. Technical Specifications Specification Value Table dimensions 350 × 300 mm Fence feed 110 mm Distance between spindle and table 130 mm Tool shank diameter 10 mm Number of spindles 3 Max. drilling depth 10 mm Speed 2800 rpm Workpiece clamping manual Control manual Motor 1.1 kW Power supply 230 V Overall dimensions 370 × 500 × 600 mm Weight 21.5 kg

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation Isdpfezuzhcox Ah Djtk • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Condition: good (used), Year of construction: 1988, functionality: fully functional, For sale is a robust and reliable Scheer DB5 dowel drilling machine / multiple-hole drilling machine for professional use in carpentry workshops, joineries, and in the furniture and interior design industries. The machine is ideally suited for precise dowel drilling and multiple-hole drilling in solid wood, chipboard, MDF, and other wood-based materials. Thanks to its robust industrial design, pneumatic workpiece clamping, and precise guide systems, fast, accurate, and consistently repeatable work is possible. The Scheer DB5 impresses with its ease of operation, high precision, and durable construction, making it ideal for daily use in the workshop. Technical data: Manufacturer: Scheer Type: DB5 Year of manufacture: 1988 Voltage: 400 V Pneumatic workpiece clamping Digital dimension display Adjustable stops with central adjustment Includes drill bit Precise linear guides Operation via foot switch Dust extraction connection available Robust steel construction Undercarriage with rollers Isdpfjzr Egksx Ah Detk Application areas: Dowel drilling Multiple-hole drilling Furniture construction Interior design Window and door construction Carpentry Joinery Series production The machine can be inspected and tested under power after prior appointment. Transportation is possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information is without guarantee.

Condition: used, Second-hand machine Features and technical specifications: - double-sided in-line drilling machine - 2 drilling motors, 1.8 kW each, with oil brake cylinders - Stroke: max. 130 mm - with pneumatic changeover valve - 21 spindles, spindle pitch 32 mm - Drilling spacing: max. 640 mm (by moving the workpiece max. 2656 mm) - Gantry clearance 850 mm - Air consumption at 5 atü: approx. 11 l per cycle - Extraction connection 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Isdpfozk Nrbjx Ah Detk Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Iodpfxezu S U Hs Ah Djtk Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops Iodpfxeyf A N Ds Ah Dotk - Coupling system for table extension

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm Itedpfx Aheztv Iuj Dsk - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: used, Year of construction: 2008, FICEP Tipo B 251 sheet metal processing center Year of construction 2008 - sheet metal processing center - Plate size max. 6000x2500mm - 1 drilling unit - 6-fold changer incl. marking tool - 1 punching unit (currently without function) - 12-fold tool changer for punching tools - Conveyor belt for finished parts - Hypertherm HPR 260 plasma source - Donaldson Torit DCE extraction system - Machine weight according to manufacturer approx. 23 tons Itjdey E N Dpspfx Ah Dek Main Technical Specifications Plate specifications on infeed side: • Length max. mm 6000 min. mm 2500 • Width max. mm 2540 min. mm 500 Work piece specifications on outfeed side: • Length min. mm 200 • Width min. mm 150 Punching Capacities (on 400N/mm² plates) • Punching force kN 1000 • Maximum stripping force kN 100 • Maximum hole diameter in punching mm 100 • Max. diameter on 20 mm thickness mm 38 Other Specifications : • Thickness of the large plate min. mm 6 • Thickness of the large plate (punching operations) max. mm 25 • Thickness of the large plate (thermal cutting) max. mm 32 • Thickness of the large plate (drilling operations - with optional device) max. mm 100 • Positioning weight max. kg 5000 • Linear weight of the large plate max. kg/m 750 • Max. vectorial traverse speed max. m/min. 30 • Cross positioning speed m/min. 40 • Working level’s height mm 1100

Condition: used, Year of construction: 2024, Slot drilling machine with rotating table • Drilling unit rotatable • 2 eccentric clamps • Height display • Mechanical dowel boring device (16-22-25-32 mm hole spacing) • 2 speeds: 1440 / 2880 rpm • Motor power 1.5 kW 1.1 Working table mm 800x400 1.2 Motor kW 1.5 1.3 Spindle speed rpm 2880 1.4 Max. slot height above table mm 160 1.5 Max. longitudinal traverse mm 345 1.6 Max. lateral traverse mm 245 1.7 Spindle stroke mm 160 1.8 Tool clamping diameter mm 0-20 1.9 Max. tool length mm 175 1.10 Number of eccentric clamps 1 1.11 Longitudinal tilt table angle ° 1.12 Spindle rotation ° 1.13 Table rotation ° +/- 45° 1.14 Machine dimensions mm 1500x1100x950 1.15 Machine weight kg 345 P 41 55 Extraction connection 1 P 41 25 2nd eccentric clamp 1 P 41 20 Mechanical dowel boring device 1 P41 07 2-speed motor 1.5/1.9kW 1440/2880 rpm P41 34 Mechanical numeric spindle height measurement Iedpfjwd U U Djx Ah Djtk Location:

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm Isdpoud H H Ujfx Ah Detk AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: used, Through-feed drilling machine with automatic workpiece transport for through-feed processing. Left machine side fixed, right side adjustable over the entire machine length. Price €3,900 in untested condition as is, loaded free on truck. >> The MERCEDES among drilling automats with the highest quality, Made in Swabia. Isdpoqy D T Tefx Ah Djtk

Condition: excellent (used), IM Very good condition. Ijdpsytc Najfx Ah Dstk

Condition: good (used), heads set: right/left/top/top spindles span 32mm motors 1,1kW heads with 5 spindles max heads span 2,5m pneumatic clamps regulation of drilling speed Iedpeyxc Dvsfx Ah Dstk

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 1VR4100C6C1000267, color: yellow, operation weight: 1,209 kg, empty load weight: 1,209 kg, fuel: diesel, Equipment: rubber tracks, For sale is a Vermeer D 6x6 Navigator compact directional drilling unit, previously used exclusively for demonstration and training purposes, complete with all accessories: 1 Vermeer D 6x6 Navigator drilling machine 1 ST 250 (960-liter) drilling fluid mixing unit 1 DCI SE UK3 drilling head positioning system (instrument, probe, monitor, 2 batteries) 45 drill rods, 1.83 cm / 6 feet each 1 drill head Iodpfx Aheyt Smuj Dstk 1 150 mm / 6 inch hole opener The machine is not refurbished but is practically new!!! It is ready for immediate use!!!

Condition: used, Used machine Iedpfx Aow I Um Hoh Dotk Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 2026, total height: 600 mm, total length: 2,400 mm, total width: 1,200 mm, Colour: Grey Welding table / Clamping table * Drilled holes! * Diagonal grid! Dimensions: 3000x1500mm Table-thickness: 15mm Hole-diameter: 28mm Extras at extra cost - 4x 3D Angle 300mm Ijdpezry Rqjfx Ah Dstk - 6x Stop 150mm - 6x Stop 225mm - 1x Protractor  - 2x Prism - 1x Eccentric - 1x Flat Angle - 12x Tension/clamping bolt - 12x Clamp - Year: 2026 - Documentation available: No - CE certificate present: No - Model: Hardened metal - Table length [mm]: 2400 - Table width [mm]: 1200 - Table top thickness [mm]: 15 - Transport dimensions: 2400mm x 1200mm x 600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, CORMAK WK50 Pillar Drill Press – Heavy-Duty Industrial Metal Drilling and Tapping Machine The CORMAK WK50 is a high-performance industrial pillar drill press with tapping function, designed for intensive drilling, reaming, countersinking, hole enlargement, and tapping operations in metal. Thanks to its rigid rectangular body construction, high feed force, and wide range of spindle speeds and torque values, the WK50 industrial drilling machine is suitable for both single-piece production and serial manufacturing, ensuring repeatability, accuracy, and high machining efficiency. Main Advantages of the Machine Large drilling capacity – up to 50 mm in steel and up to 55 mm in cast iron, enabling machining of large-diameter holes. Drilling machine with tapping function – reverse spindle rotation and high spindle torque allow efficient and precise thread cutting. Precise spindle guidance – 250 mm spindle travel and 9 feed settings (from 0.056 to 1.80 mm/rev) allow optimal adjustment of machining parameters. High spindle torque – 35 kgm – enables effective drilling and tapping even in high-strength materials. Rigid rectangular column design – provides excellent stability of the drive system and resistance to dynamic deformation. Cooling system – coolant pump with a capacity of 12 l/min ensures proper thermal conditions in the cutting zone. Intuitive operation and easy maintenance – the machine has been designed for ergonomic use and reliable long-term operation. Design and Technology – High Rigidity for Industrial Applications The CORMAK WK50 pillar drill press is based on a highly rigid construction with a vertically adjustable spindle head featuring 200 mm manual travel. The solid machine body and precision guide system ensure accurate positioning of tools and workpieces. The 12-speed spindle gearbox (31.5–1400 rpm) provides a wide operating range, allowing optimal cutting parameters to be selected for different materials and machining operations. The large 710 × 490 mm worktable makes it easier to mount large and irregularly shaped workpieces, increasing the machine’s versatility in industrial environments. Precision and Working Efficiency High spindle torque and precise feed adjustment ensure excellent repeatability during serial production tasks. The CORMAK WK50 drill press with automatic feed enables semi-automatic drilling and tapping operations, reducing errors caused by manual operation. The integrated cooling system and work lighting improve operator comfort and safety, especially during precision machining and long production cycles. Standard Equipment Cooling system with 12 l/min pump Work light 710 × 490 mm worktable Drill chuck 1–13 mm Morse reduction sleeves – 2 pcs. (for MK5) Technical Specifications Parameter Value Maximum drilling diameter 50 mm (55 mm in cast iron HB=220) Spindle taper MK5 Spindle travel 250 mm Spindle head manual travel 200 mm Itsdpferigc Nsx Ah Dok Maximum feed force 1600 kg Maximum spindle torque 35 kgm Spindle-to-column distance 335 mm Number of spindle speeds 12 Spindle speed range 31.5–1400 rpm Spindle feeds 0.056–1.80 mm/rev (9 settings) Worktable dimensions 710 × 490 mm Spindle-to-table distance 550 mm Main motor power 3 kW Coolant pump capacity 12 l/min Overall dimensions 1300 × 1200 × 2530 mm Weight 1350 kg