Used Dgs for sale (154)

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive Cpodpsttnt Iefx Aa Now -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Condition: good (used), DC, geared motor -Power: 3 kW -DC motor: Manufacturer Baumüller, type DSG Cpedpfx Ajd Evu Sja New -Speed: 6000 rpm -Transmission: Manufacturer Nord Type 2282AZ-IEC 80 -Translation: 1:11,81 -Hollow shaft diameter: 35 mm -Speedometer: Manufacturer Stegmann Type DG 60L XSR 500 Pulse/REV -Dimensions: 690/340/H200 mm -Weight: 50 kg

Condition: used, Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 Cpjdped Evuijfx Aa Njw -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Condition: used, Direct current, gear motor -Power: 2 kW -DC motor: Manufacturer Baumuller type DSG -Speed: 6000 rpm -Gearbox: manufacturer Nord type 02050F IEC80 -Translation: 1: 24.01 -Shaft diameter: 25 mm Cpsdpfx Aod Evukja Nsw -Tachometer: Manufacturer Stegmann Type DG 60L XSR 500 Puls/REV -Dimensions: 605/240/H200 mm -Weight: 30 kg

Condition: new, 1 brand new horizontal band saw with swivel frame and double mitre R/L Make: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting capacity: Round: 230 mm Rectangle: 320 x 130 mm Square: 230 mm -45° Round: 180 mm -45° Flat: 230 x 100 mm -45° Square: 150 mm +45° Round: 210 mm +45° Flat: 230 x 160 mm +45° Square: 180 mm +60° Round: 120 mm +60° Flat: 120 x 100 mm +60° Square: 100 mm Table height: 760 mm Main drive motor power: 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power: 0.12 kW 2 blade speeds: 35 / 70 m/min Saw blade dimensions: 2730 x 27 x 0.9 mm Dimensions (L x W x H): 1350 x 700 x 1300 mm Weight: 415 kg Accessories / Special features: • Double mitre cuts left/right via a swivel frame o The workpiece remains stationary during cutting! o No need to turn the material for mitre cuts! o High efficiency with substantial time savings! • Precision stops preset at 0°, 45°, and 60° left, and 45° right • Replaceable worktable • Quick-release vise, adjustable side-to-side (left/right) • Adjustable length stop 500 mm for repeat cuts • Saw arm lowering infinitely variable via hydraulic circuit • Coolant system • Chip brush • Swivelling control panel • Electric safety switches for blade tension and blade guard • Automatic cut-off at end of cut • Emergency stop switch Cpodpfx Aofk Ew Eoa Now • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: like new (used), Year of construction: 2008, functionality: fully functional, operating pressure: 13 bar, operating temperature: 195 °C, empty load weight: 700 kg, JUMAG DG 260 Steam Generator, Made in Germany. Recognized by experts as the world’s best steam generator. Coil-free design equipped with a water jacket. Consistent and smooth steam output without pressure or temperature fluctuations. Steam output: 260 kg/h. Total operating hours: only 18,500. Working pressure: from 6 bar up to max. 13 bar. Fuel: oil/gas. Economizer. Automatic or manual blowdown. Complete documentation. Start-up warranty included. The boiler has undergone internal inspection and pressure testing. On-site demonstration and commissioning available, or video demonstration upon request. Equipped with Grundfos feed pump and safety valve. EXCELLENT CONDITION. Serviced by “ZAG” Jumag Switzerland. Full UDT (Office of Technical Inspection) documentation for registration. Cedpfxjyfihys Aa Nopw All our equipment passes rigorous technical inspections, including pressure tests, safety automation checks, leak tests, and more. We cooperate with a logistics company that delivers our equipment across Europe and beyond.

Condition: used, machine/vehicle number: 26408, Year of construction: 2018, operating hours: 1,166 h, load capacity: 1,400 kg, lifting height: 2,800 mm, free lift: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 1,810 mm, Device details: Year of manufacture: 2018 Load capacity: 1,400 kg Lift height: 2,800 mm Read operating hours: 1,166 h Free lift: 1,400 mm Mast type: Duplex Mast height: 1,810 mm Length/Width/Height: 2,100 / 810 / 1,250 mm Operating weight: 1,308 kg Battery from: 2017 ---- Features: * Full free lift * DGS made of plexiglass ---- Further device information: ---- The operating hours are generally read values. We are happy to offer you suitable transport. A further 250 - 300 forklift trucks, attachments, and sweepers are immediately available for you. Rental options also available! We are also happy to buy your OLD equipment. Do you have any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! Cjdpfxoychdzj Aa Nopw We speak English. Interim sale and errors for this offer are expressly reserved. In dealer business, the device is sold as is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: good (used), Incremental rotary encoder with solid shaft, absolute rotary encoder, encoder, rotary encoder, encoder, absolute rotary encoder, absolute encoder, function encoder, resolver, resolver, rotary pulse encoder, speed encoder, incremental encoder -Manufacturer: Contact, rotary pulse encoder -Type: Dg 122.1 -No.: 401849/ 1 -Connection: 1 2 = 20 VAC/1000 rpm Codpfxeb A Sfzs Aa Nepw -Max: 10000 rpm -Quantity: 4x available -Price per piece -Weight: 1kg/pc.

Condition: good (used), Double Mitre Saw Elumatec DG 740/02 – Used, Functional, Ready for Demonstration For sale is an Elumatec Double Mitre Saw DG 740/02 in good, fully operational condition. The machine is immediately ready for use and can be demonstrated on site. Technical Data / Equipment: Model: Elumatec DG 740/02 Double mitre saw for precision cutting of aluminium and plastic profiles Robust construction, precise cutting guidance Both saw units swiveling / capable of mitre cuts Cleaned and well-maintained used condition Cutting length: 6 m Saw blade: 4420x3.8/3.2x30Z Z102 TFA Angle/degrees: 45-90° Csdpjxzdulofx Aa Nspw Condition: The machine is in functional, age-appropriate good condition. All features can be tested live during inspection. The machine has been disassembled from production, cleaned, and is stored in a warehouse ready for demonstration until sold. Inspection & Collection: Non-binding inspection possible by appointment. Collection by the buyer. Price: Negotiable If interested or if you have any questions, please feel free to contact us!

Condition: ready for operation (used), Indramat MAC 090C-0-KD-4-C / 130-A-0 / WI522LV / S003 permanent three-phase servo motor + Stegmann DG 1604 2500 PULS / REV, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cpjdji D Ih Repfx Aa Now

Condition: used, Year of construction: 2005, functionality: unexamined, Kaltenbach KBS 620 DG — Horizontal Double-Mitre Band Saw, Year 2005 Specifications Cutting capacity 90°: 620 x 350 mm Cutting capacity 70°: 610 x 350 mm Cutting capacity 60°: 570 x 350 mm Cutting capacity 45°: 470 x 350 mm Cutting capacity -45°: 430 x 350 mm Mitre range: +60° / -45° (double mitre) Blade dimensions: 6175 x 41 x 1.3 mm Blade types: Bi-metal M2, M42, M51 Cutting speed: 15–90 m/min (steplessly adjustable) Feed rate: max. 400 mm/min Construction: Double-column, heavy-duty steel frame Control: NC-controlled mitre angle setting Software: Kaltenbach PROFICUT Cjdpoyrgrpsfx Aa Nepw Cooling: Air cooling + micro oil lubrication Weight: approx. 2,600 kg Features: Suitable for cutting steel profiles, tubes, and flat bars. Hydraulic clamping after angle adjustment, steplessly adjustable blade feed, NC-controlled length measurement.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,013 h, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,237 mm, DGUV certified until: 01/2027, fork length: 1,200 mm, Equipment: UVV, cabin, lighting, pallet forks, sideshift, ✅ Equipment Data ► Design: 4-wheel forklift ► Manufacturer: Jungheinrich ► Model: DG 320s ► Year of manufacture: 2021 ► Operating hours: 2,013 h ► Condition: Used machine | as new ✅ Performance & Features ► Lifting capacity: 2,000 kg ► Mast type: Triplex free lift ► Lift height: 5,000 mm ► Free lift height: 1,600 mm ► Drive: Diesel ► Overall height: 2,237 mm ► Fork carriage: FEM 2A ► Tyres: Superelastic ► Hydraulics: 4 functions Cedpfex Uxh Nex Aa Nspw ► Cabin: Full cabin with heating ► Lighting: 2 LED headlights front | 2 LED headlights rear | Blue-Spot front | Blue-Spot rear ► Attachment: Side shifter ✅ Financing: Available on attractive terms. ✅ Delivery & Service ► Transport with our own truck available (costs depend on distance) ► Over 100 units available immediately (forklifts, pallet trucks, aerial work platforms, telehandlers) ► Large rental fleet for short- and long-term rental ► Service: Repairs, maintenance & UVV inspections by our qualified and trained service technicians ✅ Your benefits at a glance ► Recently serviced & inspected – including current UVV inspection ► Full transparency. All documents provided in paper and digital form upon purchase ► Ready to go. Immediately available and operational upon delivery ► Multiple service technicians – we are on site quickly ► Direct contacts and true experts for your specific needs ☎️ Contact us now. We are happy to provide personal advice. Location: Kassel – Nationwide delivery available.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 13346021, A well-maintained double mitre bandsaw, manufacturer: BERG&SCHMID, model: GBS 242 DG Autocut, 35+70 m/min, 400 Volt, 2 speeds. Machine number: 13346021, year of manufacture: 2019, with % pieces of spare saw blades included. Cpjdpfjydnkdsx Aa New

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV Permanent Magnet Motor SN:MAC093-32704 + Stegmann DG 1604 2500 PULS / REV encoder SN:330003657, used, normal signs of use, 100% functional, scope of delivery as per photos Cedpoi D In Tofx Aa Nepw

Condition: new, Baumüller DSG 100-K servo motor SN:20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with storage marks, 100% functional, scope of delivery as per photos Cpjdpfx Aoi D E Dvea Now

Condition: ready for operation (used), Stegmann DG 1604 / 1250PULS / REV rotary encoder SN: 490001174, used, in good condition, 100% functional, scope of delivery as per photos. Cpjdpfex Dwcnex Aa Nsw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 10000987991, overall weight: 5,110 kg, load capacity: 6,300 kg, main lifting speed: 4,000 mm/min, lifting height: 5,200 mm, 6.3t S-DG Double-Girder Overhead Crane TECHNICAL DETAILS Crane rail type: 60 × 40 Load capacity: 6,300 kg Span: 17.100 m Maximum deflection of crane bridge at rated load: 22.8 mm Wire Rope Hoist Max. lifting capacity of hoist 1: 6,300 kg Hoist classification: 1.2 + 1.2 m (D_min) Lifting height: min. 4.9 m / max. 5.20 m Type of trolley: double rail trolley Wire rope control: with hook drift Hook type/size: RSN2.5V Speeds Hoisting speed at rated load: min. 0.08 m/min to max. 4.0 m/min CSR speed at partial load: max. 6.00 m/min Trolley travel speed: max. 20 m/min Crane travel speed: max. 40 m/min MACHINE DETAILS Weight of crane including hoist: 5,110 kg Electrical Data Supply voltage: 3 Ph / 400 V / 50 Hz Control voltage: 48 V Area of application: indoors Ambient temperature: min. 5 °C to max. 40 °C Motor Power Main hoist motor: 4.5 kW Duty cycle main hoist motor: 60% ED Trolley travel motor: 1 × 0.45 kW Cpjdpox Nvlbsfx Aa Nsw Duty cycle trolley travel motor: 40% ED Crane travel motors: 2 × 0.65 kW Duty cycle crane travel motors: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance 4-stage hoist limit switch Hoist brake Wire rope drum Gearbox Overload protection Load spectrum recorder Slow/stop limit switches for trolley and crane travel Crane equipped with REMOX516MI radio remote control Includes signal horn (sound level 98 dB) Includes spare transmitter for radio remote control Includes storage cabinet for remote control Rope angle features Safety festoon line approx. 30 m long, along central support row Includes mains disconnect switch and power feed at any point Rising main (fixed installed cable) to be provided by customer Note: Further technical details can be found in the attached quotation.

Condition: new, Comparable with Behringer, Kaltenbach, Kasto, Jaespa, etc. 2-column guided bandsaw, semi-automatic model with stepless mitre adjustment on both sides, 30° - 45° - 90° - 135°. With patented mitre system (ERP No. 0491120). Particularly suitable for universal applications with various cross-sections, materials, and frequent mitre changes. The pivot point remains unchanged at any angle setting, allowing precise length measurement at 90° and in the mitre range. MEBA Eco-Saw-Innovation 2000 The universally applicable mitre bandsaw MEBA 335 DG is ergonomically advanced and offers an optimal price-performance ratio. Easy, centralised operation. The machine controls comply with CE standard 89/289. Technical Data: Cutting range: round/flat 90° 335/500x335 mm 45° right 330/305x335 mm 30° right 180/170x335 mm 45° left 305/305x335 mm Cutting speed: AC frequency-controlled drive 15-150 m/min, steplessly adjustable via operator panel Drive - Saw band: 3 kW; 400 V, 50 Hz - Hydraulic: 0.55 kW - Coolant pump: 0.11 kW Saw frame feed: Stepless up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4400 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 1320 kg Bfpzm8E9K3 Dimensions (LxWxH): 1450 x 2350 x 1900 mm Technical modifications reserved. Standard equipment of the MEBA 335 DG-500 Semi-automatic sawing cycle with workpiece clamping - sawing - frame returns to preset height after completed cut Cpsdet Dpw Rspfx Aa New MEBA High-Performance Package: Stepless hydraulic cutting pressure and feed monitoring at the blade back. This ensures optimal conditions for any sawing task, i.e., constant pressure for solid material and constant feed for thin-walled sections. Manual mitre adjustment with digital readout, accuracy to 0.1° Rapid lowering of the saw frame to the material edge via pushbutton Patented double mitre system (ERP No. 0491120) Unique double mitre bandsaw where mitres on both sides can be quickly and economically set by swiveling the saw frame and material support. Automatic movement of the clamping vices and digital mitre setting. The material vice automatically moves in the cutting direction to suit the desired mitre, ensuring the workpiece is always clamped square and close to the saw blade. The pivot point for mitre is at the intersection of the saw blade and fixed vice, so length measurements remain accurate regardless of angle. Hydraulic full-stroke workpiece clamping. Quick-clamping for material. At every saw frame angle, the material is clamped parallel at 90°. Rigid two-column linear guided saw frame Saw blade inclined 3° to the material support surface. Centralised machine control Saw frame clearance height adjustment Adjustable moveable blade guide arm for material width Carbide blade guide for band deflection wheels Synchronised chip cleaning brush Saw band tension with torque wrench Operating manual and spare parts list CETOP hydraulic system Coolant system (approx. 100 ltr.).

Condition: new, Bandsaw blades available from stock / short-term delivery in a wide range of dimensions, suitable e.g. for horizontal bandsaws from MEBA, Behringer Eisele, Jaespa, Kaltenbach, Kasto, etc. We would be pleased to provide you with a quotation for the bandsaw blades you require. Below are the most common models from MEBA with the corresponding blade dimensions (pitch and blade quality upon request – we are happy to advise you!): Bandsaw Bandsaw Blade Dimensions 230 G/230 DG 2710x27x0.9 mm 260 DG/260DG HS 3350x27x0.9 mm 320 G 3200x27x0.9 mm Codju R Rn Sepfx Aa Nspw 320 G HSS/320 DG HSS 3200x34x1.1 mm 260 GP 3350x27x0.9 mm 260 AP 3350x27x0.9 mm / 3700x27x0.9 mm from 3/2006 260 GA 3700x27x0.9 mm 335/G/DG/GA/DGA 4400x34x1.1 mm 300 A 4900x34x1.1 mm 330mat 4900x34x1.1 mm 405 DG 5000x34x1.1 mm 410/410 A/410 DG/410 DGA 5800x41x1.3 mm 510/510 A/510 DG/510 DGA 6100x41x1.3 mm 434mat 6220x41x1.3 mm 400 A/500 A 6220x41x1.3 mm 600 A 7900x54x1.6 mm 800 extreme 9000x67x1.6 mm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, 1 used steam boiler ----- - with corrugated flame tube and dished ends - Manufacturer: STANDARD Heating surface approx.: 240 sqm Capacity: 13.4 t/h Previous operating overpressure: 14.0 bar Test overpressure: 18.2 bar Water content approx.: 18,160 l Year of manufacture: 1988 Csdpfxsxtndne Aa Nopw Equipped with Saacke natural gas burner type DG 80, gas control line, control cabinet, feed water pump, and existing coarse and fine fittings.

Condition: good (used), Year of construction: 2001, Separator TEBA 240 DG Round 240 mm Rectangular 230 x 230 mm Motor 1,5kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saws 90° / -45° / +45°/ +60° Csdpfou Ekw Nsx Aa Njpw Cutting speed: 40/80 m/min.

Condition: like new (used), Year of construction: 2022, operating hours: 1,034 h, functionality: fully functional, machine/vehicle number: 26128, Okamoto OGM 250 UNC III Machine Characteristics: - OKAMOTO touch-screen NC controller with advanced OKAMOTO software - 2-axis interpolation - Step (shoulder) automatic probe for setting starting reference and face grinding - Automatic wheel dressing with automatic compensation - Up to 21 programs can be stored - 6 types of grinding cycles, up to 10 steps each - 5 types of wheel dressing cycles - Zero point measuring device and air gap measuring device (optional) - Extremely rigid, stress-relieved cast iron bed construction - Double V-type prismatic slideways, only OKAMOTO machines are manufactured this way (with unique hand-scraped surfaces) Technical Data: Capacity - Max. swing diameter over table: Ø 220 mm - Distance between centers: 500 mm - Max. grindable diameter: Ø 200 mm - Max. workpiece weight between centers: 50 kg - Max. workpiece weight in chuck, gross: 20 kg - Grinding wheel size for universal grinder: Ø305 mm x 50 mm x Ø127 mm - Max. peripheral speed (with inverter): 45 m/sec - Wheel spindle X-travel: 215 mm - Universal swiveling range: +/- 30° - Diameter resolution: 0.0001 mm - Rapid traverse in diameter: 4 m/min - Table Z-travel: 762 mm - Swivel angle: 0° ~ -9° - Resolution: 0.0001 mm - Rapid traverse: 8 m/min - Workhead type: fixed and rotating centers, taper MK3 - Workhead bore diameter: Ø18 mm, speed 10 – 500 rpm - Swivel angle - universal: 30°/ -90° - Tailstock sleeve stroke: 20 mm, sleeve taper MK3 - Motors: Wheel spindle 3.7 kW, workhead AC servo 1.8 kW, table feed AC servo 1.2 kW, wheel feed AC servo 1.2 kW Cjdpfxox R Tw Ro Aa Nopw - Total power requirement: 15 kVA - Machine dimensions: length 3,400 mm, width 2,330 mm, height 1,950 mm - Net weight: 3,300 kg Standard grinding and wheel dressing software features: - 10-step automatic grinding cycle - Straight wheel dressing cycle - Plunge oscillation grinding cycle - Offset plunge (roughing) + cross-feed finishing grinding cycle - Shoulder wheel dressing cycle for both left and right sides - Profile wheel dressing cycle, programmable in ISO G-code - Grinding cycle for workpiece shoulders, left and right sides Standard Accessories: - Grinding wheel Ø305x50xØ127 mm (UNC III), 1 pc - 2 wheel arbors - 3.7 kW spindle motor - Max. grinding wheel peripheral speed: 45 m/sec - Speed controller for workhead spindle - FANUC 0i D CNC control (simultaneous 2-axis) - 10.4" color OKAMOTO controller – vertical and cross-feed display - Graphical teach software for creating grinding and dressing cycles - Complete Fanuc push-button panel for ISO G-code programs with corner radius compensation - Electronic handwheel (graduations: x1/x10/x100) - Rapid traverse control lever (joystick) for cross and longitudinal directions - Enclosed guard with safety interlocked sliding door - LED machine lamp - Automatic lubrication during operation - Coolant nozzles and piping - Coolant system for wheel dressing - Permanent coolant installation to the table - Carbide centers - Step (shoulder) positioning device and software - Gap sensor and software - Leveling screws and base plates - Tool kit - Operating manual - CE version - Table rotation measuring device - Coolant system with paper filter, DGS, 200 l - Rinsing gun - 2-point manual steady rest - 130 mm manual chuck with backplate - Motorized tailstock sleeve with foot pedal - Status lamp (green/yellow/red) - Balancing arbor - Spare wheel arbor

Condition: like new (used), Year of construction: 2008, functionality: fully functional, operating pressure: 13 bar, operating temperature: 195 °C, empty load weight: 800 kg, JUMAG DG 360 Steam Generator, Made in Germany. Regarded by specialists as the best steam generator in the world. Coil-less design. Equipped with a water jacket. Delivers consistent and smooth steam output, without pressure or temperature fluctuations or surges. Performance – 360 to 400 kg/h. The generator features two power ranges: 1st stage up to 200 kg/h; 2nd stage with modulation up to 400 kg/h. Operating pressure from 6 bar up to a maximum of 13 bar. Fuel – oil/gas. Economizer. Automatic or manual blowdown. Complete documentation. Commissioning warranty. Boiler inspected and pressure tested. Csdpeyfihtjfx Aa Nopw Demonstration and commissioning available on-site or via video. Equipped with Grundfos feed pump and safety valve. EXCELLENT CONDITION. Serviced by "ZAG" Jumag Switzerland. Complete documentation for UDT (Office of Technical Inspection) registration. All machines offered by us undergo rigorous technical inspections, including pressure tests, safety automation system checks, leak tests, and more. We cooperate with a logistics company that delivers our equipment to clients across Europe and beyond.

Condition: excellent (used), pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 320. Steam output 320 kg/h. Maximum steam pressure 13 bar. Delivery available for an additional charge. On-site inspection possible. If you have any questions, please contact us. Csdpfxeydq E Ds Aa Nopw

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. Cpjdpfsydq Ewsx Aa New The unit is in very good condition. Model: DG 360. Year of manufacture: 2009. Steam output: 360 kg/h. Max steam pressure: 13 bar. Delivery available at extra cost. On-site inspection possible. Feel free to contact us with any questions.