Used Die-Casting Machine for sale (66,815)

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Duodpfxeza E Rmo Adcsu

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Duodpswc Tdzsfx Adcsu Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001

Condition: new, Year of construction: 2020, Electric furnace MELTEC Typ ZC50/180 TOC incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) Djdpfxey E Tyns Adcjuu Electric heating with heating elements. Transfer of melt below bath level from melting to casting chamber by pump to provide constant bath level together with shot to shot consistency. Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 50/180 TOC suitable for DAW 50F and W50Zn

Condition: new, Year of construction: 2023, Electric furnace MELTEC Typ ZC80/180F ECO V2 incl. iron steel crucible, isolated coverand substructure. Dodpfx Adoy E Tyhecjuu Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 820,0 kg/Zn Melting capacity: 180,0 kg/Zn/h Electrical connection: 27,0 kW Type: ZC 80/180 F ECO V2 suitable for DAW 80F and W80Zn

Condition: new, Year of construction: 2022, Electric furnace MELTEC Typ ZC20/120F ECO V2 incl. iron steel crucible, isolated coverand substructure. Without control cabinet (can be ordered aditionally) The EcoMelTec furnace combines the advantages of the proven multi chamber furnace with many new functions for double savings. New functions help to optimize the handling of the casting process just as: - Good accessibility for cleaning purposes via flexibly mountable flap cover - New pump design enables longer cleaning intervals - Storage for slag container - facilitates cleaning the melt bath - Symmetrical furnace design - no right-hand/left-hand version required Crucible content: 420,0 kg/Zn Melting capacity: 120,0 kg/Zn/h Electrical connection: 21,5 kW Dodpfoy E Tybsx Adceuu Type: ZC 20/120 F ECO V2 suitable for DAW 20F and W20Zn

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer Dujdpjy Diauofx Adcju

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Djdswywn Eopfx Adcjuu

Condition: used, Year of construction: 2008, Charmilles FO 350 S Die-Sink Electro-Discharge Machine. Serial No. 642977 (2008). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Dujdpfxey Rz Nbo Adcsu Location: This lot is located in Birmingham, UK. A charge of £550 for decomissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 858799A, Manufacturer: Ruiyang Printing Machinery Co., Ltd., China Model: MH-1650 Machine Category: Die Cutting & Creasing Machine Machine Type: Automatic Large Format Die Cutter Year of Manufacture: 2014 Serial Number: 858799A Technical Specifications: - Max. Sheet Size: 1650 x 1210 mm - Min. Sheet Size: 650 x 550 mm - Max. Die Cutting Size: 1620 x 1190 mm - Speed: up to 3,200 sheets/hour - Power Supply: 380 V, 50 Hz, 3 phases Dujdpew Rb Ipefx Adcju Features: - Automatic feeder with suction head - Large format pile delivery - Heavy-duty design for carton and corrugated board - Control panel with management and safety functions - Suitable for large format packaging production

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically Dodpfob A Nc Hex Adcouu -Year of manufacture: 1995

Condition: used, Punching machine for, e.g., slipcases with many punching dies Dedpoxw N Ntofx Adceuu

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Machinetype: thread rolling machine - flat die Info: vibratory feeder Make: HILGELAND Dsdpfewi Tc Rex Adcouu Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Location: In our warehouse

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Dujdpfx Adozb Nlwocju

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° Dusdpewbvmisfx Adcsu V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove Duedpfx Ashmmfkodcju - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) Dedpfoxpqy Dex Adceuu - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Year of construction: 1995, condition: good (used), ARD EDM diesinking machine offered. Dsdpjhktttofx Adcouu Type: M 50 F Control unit: ARD system Facile A X-travel: 310 mm Y-travel: 200 mm Z-travel: 200 mm Bed: 360 x 600 mm Power: 5,5 KVA Spindle type: System 3R Spindle stroke: 200 mm Year: 1995 Dimensions: 150x135x210 cm LxWxH For more information call us or send an e-mail.

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Dujdpfxjy Szlxs Adcou Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.

Condition: used, Rotary punching machine, model BRS, with accessories Production direction: left to right Strip infeed basket with strip guide Driven feed, driven lower roller Upper roller adjustable manually Internal lateral strip guides 2 rotary punches, numerous adjustment options Strip outfeed basket Dodpfoy Syivex Adceuu Scrap conveyor belt Wheel displacement for transferring material out of the production line to rolls Protective covers with safety interlocks Including punching tools Including control system and operating panel Including electrical documentation The machine was used to punch C-rails and hat sections from 2 mm sheet metal. It operated flawlessly in the customer's production facility until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other equipment.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame Djdpfsy Umkfex Adcjuu – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Dsdpsy Tu Rwefx Adcjuu Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 Dedpjya Iaqofx Adcouu - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Year of construction: 2000, condition: used, Punching machine Noble HM 35/350 Dodpog Dgyxjfx Adceuu BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: used, Year of construction: 1992, functionality: fully functional, power: 2,500 kW (3,399.05 HP), input voltage: 380 V, input current: 53 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, table length: 4,050 mm, year of last overhaul: 2007, Equipment: documentation/manual, We are offering this used Eisen u. Hammerwerk GmbH - EHT EHPS 25-40 press brake (hydraulic press brake, die bending press) for sale. Available immediately. Ready for operation. Dsdpoy D Sy Rsfx Adcouu For sale due to new acquisition. Specifications: - 250 t pressing force - Cybelec DNC880S CNC control with Windows operating system (retrofitted in 2007) - Foot pedal control - Various upper tools in different lengths (segmented) - Lower tool (reversible die) in various lengths (segmented) - Hydraulic tool clamping - Support table for bent parts Technical data: - Machine type: EHPS 25-40 - Force: 2500 kN - Year of manufacture: 1992 - Working length: 4050 mm - Serial number: 207380 - Power supply: 3~ - Frequency: 50 Hz - Operating voltage: 380 V - Control voltage: 24/220 V - Rated current: 53 A - Main fuse rated current: 80 A - Circuit diagram number: 209-178/372 If you have any questions or require more information, feel free to send us a message or give us a call. Machine location at our premises: Pavic Fahrzeugtechnik Homberg GmbH Poschweg 2 34576 Homberg Relbehausen Germany This is a non-binding offer. Subject to prior sale, errors and changes excepted.

Year of construction: 2012, condition: ready for operation (used), General Data Measurements width 1850 mm Measurements depth 1300 mm Measurements height 2500 mm Machine weight 1540 kg Main Drive Djdpsx D Inbofx Adcjuu Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 250 mm Table Table load 400 kg Additional Equipment Max. Electrode Weight: 80 kg This 3-axis AgieCharmilles CABINET FORM20 die-sinking EDM machine was manufactured in 2012. Ideal for precision mold making and tooling applications, it offers robust performance and reliability. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles CABINET FORM20 machine we have for sale. Contact us for more information. Application Types EDM