Used Disinfection for sale (93)

Year of construction: 2022, condition: new, 1 x Niro-Tech SHM2 pass-through hygiene station, comprising of boot-wash, hand sanitising/disinfecting station and turnstile. The boot-wash features traditional rotating brushes which clean and disinfect work shoe / boot bottoms with automatic dispensation of disinfection / sanitising fluid. The hand-sanitising station automatically doses sanitising solution when hands are inserted in the specially designed sockets. Can be manufactured so as to run Right – Left or Left – Right depending on your factory requirements. Dimensions – 1620mm wide x 1080mm long x 1400mm high. Electricity – 400v, 50hz, 3 phase. Cgedohr Rqljpfx Aaaer Manufactured in AISI 304 stainless steel. Brushes can be chosen in blue, red or white colours.

Condition: used, mileage: 62,000 km, power: 125 kW (169.95 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,546 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a well-maintained Ford Transit panel van L3-H2 featuring the highly sought-after 2.0-liter diesel engine. * The vehicle is in good condition! * New TÜV & AU with no defects, valid until 04/2028 * German vehicle * Regularly serviced * VAT deductible Cgedeyv Ufgjpfx Aaaer * One previous owner Equipment: * Panel van L3-H2 * Air conditioning * Cruise control * Reversing camera * Auxiliary heater * Tow bar with 3,500 kg towing capacity * Increased towing capacity * Front and rear parking sensors (PDC) * Heated seats (driver & passenger) * Passenger airbag * Electrically adjustable exterior mirrors * N1 truck registration * Electric windows * 3 seats * Central locking * And much more… Technical Data: * Gross vehicle weight: 3,500 kg * Kerb weight: 2,400 kg * Payload: 1,100 kg * Towing capacity: 3,500 kg Why choose us? * Attractive financing via our partner bank * Nationwide delivery of your preferred vehicle * Fair trade-in offers for old vehicles * Short-term export number plates (5-day/transit plates) usually available same day * Pick-up service from the airport or station All vehicles are professionally detailed and hygienically clean! Special features: Interior and ventilation system disinfected with ozone treatment; two-stage exterior polish, paint correction and smart repair if necessary. Each vehicle is thoroughly serviced. Naturally, fresh fluids, filters, and all necessary maintenance are included, so you don’t have to worry. Optionally, we can present the vehicle at an independent inspection station or workshop of your choice. We appreciate your interest and are at your complete disposal around the clock. If you have questions, comments, or special requests, don’t hesitate to contact us! More information and insights into our business philosophy can be found at Special Equipment: Passenger airbag, Audio System 21: Digital Radio (DAB / DAB+) with 8" multifunction display, high-mounted rear LED lights, electrically folding exterior mirrors, fixed window in sliding door (right side), vehicle without vinyl flooring in cargo/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), heated rear window, auto-dimming interior mirror, cold-start package, LED cargo area lighting, plastic partition wall with window, fog lights with static cornering light, Seat package 9/15: Driver’s seat (4-way adjustable) - double passenger seat including seat heating, fabric upholstery, 6.5x16 steel wheels, auxiliary heating package 1, electric step under right sliding door Additional Features: Overhead storage in cab, Trailer Stability Program (TSA), electrically adjustable and heated exterior mirrors, integrated turn signals in mirrors, Vinyl floor in cargo/passenger area, on-board computer, entry lighting, electronic brakeforce distribution (EBD), electronic traction control, assist system: hill start assist, emergency brake assist, crosswind assist, heater with recirculation function, body style: high roof standard box, body variant: medium high roof, steering column height/length adjustable, engine 2.0L - 125 kW TDCi KAT, MyKey (2nd programmable key), front and rear parking aid system.

Condition: used, mileage: 110,000 km, power: 120 kW (163.15 HP), first registration: 01/2014, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,945 mm, total width: 1,993 mm, total height: 2,725 mm, loading space length: 4,300 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale here is a well-maintained Volkswagen Crafter Maxi equipped with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 5 emissions standard * 1 previous owner Features: * Maxi panel van * Air conditioning * Electric sliding door * Multifunction steering wheel * Front and rear parking sensors (PDC) * Registered as a commercial vehicle (truck classification) * Electrically adjustable exterior mirrors * Electric windows * Central locking * And much more... Technical data: * Permissible total weight: 3,500 kg * Curb weight: 2,350 kg * Payload: 1,150 kg * Towing capacity: 2,000 kg Why choose us? Attractive financing options through our partner bank. * Nationwide delivery of your chosen vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day/export registration) usually available the same day * Pick-up service from the airport or train station All vehicles are professionally prepared and hygienically clean! Special features: Interior and ventilation system disinfected with ozone treatment. 2-stage exterior polishing, paint correction, and smart repair as required. All our vehicles have also undergone thorough maintenance. Naturally, this includes new fluids, filters, and any other maintenance items, so you don’t have to worry. Optionally, we can present the vehicle for inspection at an independent testing center or a workshop of your choice. We are pleased to have sparked your interest and are available for you 24/7. If you have any questions, comments, or special requests, please do not hesitate to contact us! More information and insights into our business philosophy at Cgedox Tb Hljpfx Aaasr Special equipment: Storage: compartment lid for dashboard top, DIN slot storage above front headliner, terminal connection, RNS 6000 audio-navigation system (front speakers), electrically adjustable and heated exterior mirrors, roof rack mounting rails, entry handle on rear left D-pillar, Hill Start Assist, front grab handles, lockable glove compartment, driver’s cab interior lights: 2 reading lights front, cargo/interior compartment lights: 2 units, cargo/interior compartment: step lighting, front headrests height/tilt adjustable, multifunction steering wheel, matching-size spare wheel, rear door hinges with extended opening angle, electric sliding door right in loading/passenger compartment incl. electric soft-close, double passenger seat in cab, Transport Package, rear step integrated into bumper, high-grade wooden lining in cargo/interior compartment Additional equipment: Storage: flat tray/compartment above windscreen, driver’s airbag, traction control (ASR), entry handle on rear right D-pillar, Brake Assist System (HBA), rear wing doors without windows, Body/chassis: high roof van standard, body version: high roof, 75L fuel tank, high full partition wall without window, side marker lamps, facelift model, 2.0L – 120 kW TDI engine, wheelbase 4325 mm, low emissions according to Euro 5 standard, right-hand side loading/passenger compartment sliding door, cloth seat upholstery, height-adjustable driver’s seat, rear stabilizer, reinforced front stabilizer, steel wheels 6.5x16, gross vehicle weight 3.5 t, additional brake

Condition: good (used), Year of construction: 2017, In good technical condition. Year of manufacture: 2017. Suitable for dry deburring and disinfection of metal surfaces. Burr removal. Oxide removal on edges and surface finishing. Manufacturer: SCM Group spa Italy. Model: DMC M950. 400V, 71A. Machine weight: 2260 kg. Cjdpfex Ttn Uex Aaajgr

Condition: good (used), Work line incl. Meiko equipment Ideal for use in hospitals, retirement homes or sanatoriums. Everywhere where visually appealing products and good hygiene properties are required. Resistant to cold, heat, moisture and many chemicals. Wear and corrosion resistant. Features: -2 hinged doors, for quick access -1 large sink Dimensions approx. - Height 90 cm without backsplash - width 210 cm - depth 59 cm + MEIKO faeces flusher KD 40.1 Use: For cleaning of bedpans and urine bottles. -thermal disinfection -stainless steel front for easy disinfection -digital display with control panel Codpfslikd Rox Aaaogr Electrical connection: 230V / 50 Hz + MEIKO disinfection rinser Use: For rough cleaning of urine bottles and bedpans. During the rinsing process the faeces are rinsed off with a large amount of water under pressure. rinsed off under pressure. Item condition:used

Condition: used, mileage: 87,000 km, power: 96 kW (130.52 HP), first registration: 07/2021, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: air conditioning, central locking, For sale here is a well-maintained Ford Transit Custom Trail, equipped with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 6d emissions standard * 2nd owner Equipment: Panel van L1-H1 * Trail edition * Automatic climate control * Towbar * Roof rack * Alloy wheels * Cruise control * Style package * Front and rear parking sensors (PDC) * Multifunction steering wheel * DAB radio * Truck registration (LKW Zulassung) * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * Central locking * and much more... Technical data: * Permissible gross vehicle weight: 3,000 kg * Curb weight: 2,070 kg * Payload: 930 kg * Towing capacity: 2,500 kg Why choose us? * Attractive financing through our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day / export registration) usually available the same day * Pick-up service from airport or train station All vehicles are professionally prepared and hygienically clean! Key features include: * Disinfection of interior and ventilation system via ozone treatment * 2-stage exterior polish * Paint correction and smart repair if required All our vehicles have also undergone thorough maintenance. Naturally, this includes new fluids, filters, and any service items so you have nothing to worry about. Optionally, we can present the vehicle for inspection at an independent test centre or workshop of your choice. We appreciate your interest and are available around the clock to assist you. If you have any questions, comments, or special requests, please do not hesitate to contact us! Find more information and insights into our business philosophy on our website. Special equipment: * Programmable battery monitoring * 240 A alternator * LED cargo area lighting * Cargo protection package * Load securing package * Visibility Package 2 * Locking differential * 12V socket in load/passenger compartment * Wooden panelling in load/passenger compartment Further equipment: * Driver's airbag * Audio system: radio with USB and Bluetooth hands-free system * Electrically adjustable and heated exterior mirrors * Indicators integrated in exterior mirrors * Vinyl flooring in load/passenger area * On-board computer * Entry lighting * Electronic brakeforce distribution (EBD) * Electronic traction control * Driver assistance systems: Hill Start Assist, Emergency Brake Assist, Side Wind Assist * Lockable glove compartment * Rear wing doors without glazing (180-degree opening) * Cabin air filter: pollen filter * Body: high-roof standard panel van * Body variant: medium-height roof * Adjustable (height/length) steering column * Truck registration (LKW Zulassung) Codpsyrlqkefx Aaaegr * Facelift * 2.0L - 96 kW TDCi engine with catalytic converter * Parking assist system (front and rear) * Digital radio reception (DAB+) * Wheelbase: 2,933 mm * Full-size spare wheel * Low-emission compliant with Euro 6 and Euro 6d-TEMP standards * Intermittent wipers, adjustable * H4 headlights * Sliding door on right for load/passenger compartment * Front and rear mud flaps * Side protection strips * Seat package 13: Driver's seat (4-way adjustable) – twin passenger bench, fabric * Start/stop system * Partially painted bumpers * Style color package

Condition: good (used), functionality: fully functional, Offered is a hygiene sluice/disinfection sluice by Blue Level DLSO 2000. 400V, 16A. Complete V2A stainless steel construction. New brush rollers. Dimensions (L x W x H): 273x95x177 cm. Immediately ready for use, fully operational. Further information upon request. Payment in cash or advance payment. Sale only to commercial customers. No warranty or guarantee. Cgjdsynkh Tjpfx Aaaor

Condition: used, mileage: 205,000 km, power: 107 kW (145.48 HP), first registration: 06/2012, fuel type: diesel, overall weight: 6,300 kg, color: black, gearing type: mechanical, emission class: euro5, number of seats: 7, total length: 6,635 mm, total width: 2,300 mm, loading space length: 3,450 mm, loading space width: 2,250 mm, Equipment: central locking, For sale here is a well-maintained Iveco Daily 65C15 DoKa MAXI featuring the globally popular 3.0-litre diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 5 emissions standard * Single ownership Equipment: * Maxi double cab * Maxi wheelbase * 7 seats * Tow bar * Increased towing capacity * Truck registration * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * And much more... Technical Data: * Gross vehicle weight: 6,300 kg * Unladen weight: 2,990 kg * Payload: 3,310 kg * Towing capacity: 3,500 kg Why choose us? Attractive financing solutions through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit number plates (5-day/ export registration), usually available same day * Pick-up service from airport or train station All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone treatment. 2-stage exterior polishing * If necessary, paint correction and smart repair Cgedpsyndzmsfx Aaaor All our vehicles have also undergone thorough maintenance. Naturally, this includes new fluids, filters, and other tasks so you don't have to worry about them. Optionally, we can present the vehicle at an independent inspection centre or workshop of your choice. We are delighted to have attracted your interest and are available to you around the clock for all your needs. If you have any questions, comments or special requests, please don’t hesitate to contact us! You can find more information and insights into our business philosophy at

Condition: new, The Instrument Reprocessing Revolution Careclave can be installed quickly and easily in any reprocessing room. Four process steps in one device – compelling advantages for your practice! Why use four separate instrument reprocessing products when you can have everything in one? With Careclave, you'll save significantly more time, money, and space in your dental practice from day one compared to conventional device combinations: €6,000.00 less in service costs: Because fewer devices mean lower costs. Careclave is not only more affordable to purchase, but it also saves you the extra maintenance and validation costs for additional devices. 45% more space in the reprocessing room: Your practice team knows that workspace in the reprocessing room is valuable. With Careclave, you have significantly more space for the safe reprocessing of your instruments! You can do without an additional care device. 33% more transfer instruments per cycle: Careclave is a real speed demon. Reprocessing eight hollow instruments in just 16–18 minutes guarantees rapid reuse and thus reduces the need for additional instruments. The revolutionary 4-in-1 solution combines the entire instrument reprocessing process in a single device: 1. Cleaning and Disinfection Careclave® ensures the cleaning and disinfection of up to eight handpieces, prophylaxis handpieces, or ultrasonic scaler tips in just 16 minutes. 2. Maintenance Careclave gently and quickly maintains the handpieces in the Carebox. With the world's first integrated ADDcare maintenance station, the crucial chuck maintenance is also performed directly at the Careclave. 3. Sterilization (Class B) With its patented DRYtelligence® and double-jacket technology, the Careclave offers everything you would expect from a modern autoclave – and more: Sterilize up to 11 kg of instruments on up to 8 trays or in 4 MELAstore® boxes in record time. Thanks to the revolutionary chamber design, reprocessing and maintaining instruments in the Carebox, as well as simultaneously sterilizing other instruments on short trays, is possible in a single cycle. 4. Documentation and Release With ProControl, you can provide proof of flawless instrument reprocessing quickly, securely, and paperlessly. Documentation and release are performed directly on the Careclave® display without the need for additional software. For seamless traceability, the reprocessing protocols are saved to the MELAG USB stick or on the practice network. 4. Documentation and Release Model: Careclave 618 Dimensions (D x W x H): 65.3 cm x 48 cm x 56.2 cm Fits a 60 cm tabletop Internal dimensions: Ø 25 cm x 35 cm Area of ​​application: Dental Power supply: 220–240 V, 50 Hz Power consumption: 3 kW Compressed air connection: 4–8 bar Validability: Validatable Sterilization class: Class B Documentation: USB, network Chamber volume: 18 liters Load capacity: 11 kg instruments / 2 kg textiles Suitable for textiles: Yes Suitable for hollow instruments: Yes Suitable for endoscopes: Yes Drying: Integrated drying system Color: White Weight: 69 kg Cjdpfxsyk Eqbe Aaaegr MSRP €21,509.00 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, mileage: 166,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,300 kg, first registration: 04/2013, emission class: euro5, color: silver, number of seats: 7, total length: 5,413 mm, total width: 2,050 mm, total height: 2,524 mm, Equipment: air conditioning, central locking, For sale here is a well-maintained Fiat Ducato Shuttle equipped with the globally popular 2.3-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 5 emissions standard * 2nd owner Equipment: * L2-H2 configuration * Shuttle version * 7 seats * Automatic climate control * Passenger airbag Cgsdpfxeyk Rf Ro Aaasr * M1 certification (passenger vehicle registration) * Electrically adjustable exterior mirrors * Power windows * Central locking * And much more… Technical data: Permissible total weight: 3,300 kg * Curb weight: 2,400 kg * Payload: 900 kg * Towing capacity: 2,500 kg Why choose us? * Attractive financing through our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair terms * Temporary registration plates (5-day/ customs registration) usually available the same day * Pickup service from airport or train station All vehicles are professionally prepared and hygienically cleaned! Special features: interior and ventilation system disinfected using ozone cleaning; 2-stage exterior polish, possible paint correction and smart repair. All our vehicles have also undergone thorough maintenance. Of course, including new fluids, filters, and other measures you shouldn’t have to worry about. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have sparked your interest and are available for you around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! For more information and insights into our business philosophy, visit

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Financing through our bank is also possible. komplett-konzept.leasingo.de Cjdpfoin Edwjx Aaaegr Find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Bottle washer, make Krones, type: KES 1-5-190/14-110 R, single-end machine in stainless steel, for 13.200 bph, 14 Csdpfx Asrxuv Aeaaegr bottles/row, with 110mm cell pitch, with pre rinsing, presoak bath, caustic soaking and caustic spraying, 4 water spraying (2x warm + 1x cold + 1x fresh water), with headboard disinfection, S7 control, built 1996. L: ~12.500 mm, W: 4.645 mm, H: 3.500 mm, weight: 33.000 kg

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm Codpfx Aasupw R Aeaogr band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Cgjdpfjiuzkmjx Aaajr Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Cgedpfxeiuzlvj Aaajr Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling a variety of liquids. Examples include: - Milk - Water - Alcohol - Disinfectants - Etc. This is a robust machine that operates on compressed air and 220V, Plug and Play! It is ideally suited for filling small batches. Only a very small air compressor is required to operate the machine; if desired, this can be supplied as well. We recommend at least a 12L compressor. Cgjdpforivxcex Aaajr The filling machine is equipped with a 1000ml cylinder, allowing it to dispense a maximum of 1000ml per stroke. For larger volumes, multiple strokes can be programmed. For example, 2500ml can be easily filled in 2 x 1250ml. The minimum dosage per stroke is 100ml; any volume between 100 and 1000ml can be filled in a single stroke. We also offer models with cylinders up to 5000ml per stroke. The unit comes with a suction hose, enabling direct suction from a barrel or IBC container. The machine features a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it simple and fast to handle larger quantities. The foot pedal allows for manual filling at your own pace. Depending on the operator and the volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be conveniently placed on a table. Entirely constructed from stainless steel, it is a very high-quality, industrial-grade machine. For questions, please feel free to email; we are happy to assist with this or another machine. We also supply a labelling machine which is a perfect match for the filler. We strive to respond to your inquiries within 24 hours. Of course, we are also available by phone. Our office hours are Monday to Friday, 09:00–17:00.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Large hopper & expansion options Cedpfxerivwfo Aaasgr Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total width: 42 mm, total length: 101 mm, total height: 67 mm, compressed air connection: 2 bar, overall weight: 17 kg, filling weight (max.): 500 g, filling weight (min.): 50 g, input voltage: 230 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: New filling machine suitable for precise dispensing of liquids, pastes, and semi-viscous products. Suitable applications include: - Disinfectants - Shampoos & lotions - Creams & gels - Honey & jam - Milk & yogurt - Water & alcohol - Oils & sauces (such as pesto) And many other products Reliable, simple, and efficient This machine operates entirely pneumatically and requires only compressed air. As a result, it is very low-maintenance, reliable, and immediately ready for plug & play operation. A small compressor is sufficient to operate the machine; a compressor can be supplied upon request. Flexible fill volume The filling machine is equipped with a 500 ml cylinder, allowing a maximum of 500 ml to be dispensed per stroke. Csdjyfg Scjpfx Aaasgr - Minimum fill quantity: 50 ml - Any volume between 50 and 500 ml can be dispensed in a single stroke - Larger volumes are easily achievable by conducting multiple strokes consecutively Large hopper & expansion options The machine features a 30-liter stainless steel hopper. It can also be connected to an IBC container or 200-liter drum, allowing for swift and efficient processing of larger filling batches. Manual or automatic operation The filling machine comes with: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher throughput Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high quality - Weight: approx. 20 kg - Easily placed on a table - Fully constructed from high-grade stainless steel - Excellent industrial build quality Interested or have questions? Do you have questions or would you like more information? Please feel free to contact us via email — we are happy to assist you. We also offer a labelling machine that combines perfectly with this filler for a complete filling line solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: like new (used), Serial: 26557-PO1 Codpfshxyq Esx Aaajgr Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

Condition: used, This listing is for the Binder BF115 Incubator The unit is in full working condition and is ready for immediate use BINDER BF 115 – e Series Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Cjdpsxhfz Tjfx Aaaogr Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Internal Dimensions 550 × 550 × 380 mm (W×H×D) External Dimensions 710 × 725 × 605 mm (W×H×D) Power Supply 230 V, 0.4 kW, 6.3 A fuse (also available in 120 V) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Energy Consumption ~60 Wh/h @ 37 °C; ~235 Wh/h @ 100 °C Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Cjdpfx Aaoxhfz Hoasgr Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: used, This listing is for a Elga Purelab Option Water Purification System with 40l Tank. The unit is in full working condition and is ready for immediate release. Optimize your laboratory's water quality with the Elga Purelab Option Water Purification System, designed to deliver high-quality Type 2 water for various laboratory applications. Key Features: Type 2 Water Purification System: Perfect for general laboratory use and feeding Type 1 water purification systems, ensuring you have reliable water quality for various experiments. 40L Storage Tank: Equipped with a spacious 40L tank, providing ample storage for your purified water needs, minimizing the need for frequent refills. Advanced UV Treatment: Features a dual-wavelength UV lamp (185/254 nm) that facilitates photo-oxidation of feed water, significantly reducing Total Organic Carbon (TOC) levels to less than 30 parts per billion (ppb)—ideal for sensitive applications. High-Quality Deionization: Utilizes a deionization cartridge to achieve resistivity levels ranging from 1 to 10 , ensuring high purity water suitable for critical lab tasks. Cgsdpfsxxy U Njx Aaaer Built-in Boost Pump: The integrated boost pump facilitates the recirculation of treated water, enhancing the system's efficiency and maintaining water quality over time. Compact and User-Friendly Design: Designed for ease of use, the system’s compact footprint makes it suitable for various lab setups without compromising space. Specifications: Water Flow Rate: Capable of delivering up to 7.5 liters per hour (LPH), ensuring a steady supply of purified water for your laboratory requirements. Resistivity Levels: Achieves resistivity ranging from 1 to 10 megohm-cm, providing high-quality water suitable for sensitive analytical applications. TOC Reduction Performance: Effectively reduces TOC levels to less than 30 ppb, critical for applications requiring ultra-pure water. UV Lamp Specifications: The dual-wavelength UV lamp (185/254 nm) not only assists in TOC reduction but also helps in the disinfection of water, enhancing its overall quality.

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: Cgedexhgd Nspfx Aaajr 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : Cgedpfjxabacsx Aaaer - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: used, Knife disinfection machine, knife disinfection device Cgedpfod Tgaqjx Aaaor -GENO: dishwasher 1988 -Metal case with: accessories see photo -Dimensions: 510/410/H210 mm -Weight: 19.5 kg